journal article·2021-12-07Open access

Design of a Mass Air Flow Sensor Employing Additive Manufacturing and Standard Airfoil Geometry

Dimitrios-Nikolaos Pagonis, Vasiliki Benaki, Grigoris Kaltsas, Antonios Pagonis

Applied Sciences· Volume 11· Issue 24

Abstract

This work concerns the design, fabrication, and preliminary characterization of a novel sensor for determining the air intake of low and medium power internal combustion engines employed at various applications in the marine industry. The novelty of the presented sensor focuses on the fabrication process, which is based on additive manufacturing combined with PCB technology, and the design of the sensing elements housing geometry, which is derived through suitable CFD simulations and is based on standard airfoil geometry. The proposed process enables low-cost, fast fabrication, effective thermal isolation, and facile electrical interconnection to the corresponding circuitry of the sensor. For initial characterization purposes, the prototype device was integrated into a DIESEL engine testbed while a commercially available mass air flow sensor was employed as a reference; the proper functionality of the developed prototype has been validated. Key features of the proposed device are low-cost, fast on-site manufacturing of the device, robustness, and simplicity, suggesting numerous potential applications in marine engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Icing and De-icing Technologies · Advanced Sensor Technologies Research · Advanced Aircraft Design and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Naval Architecture Department, University of West Attica, 122 43 Athens, Greece

Electrical & Electronic Engineering Department, University of West Attica, 122 43 Athens, Greece

Wärtsilä Greece S.A., 183 44 Moschato, Greece

References (29)

Show source-provided references
1. Techno-economic investigation of alternative propulsion plants for Ferries and RoRo ships10.1016/j.enconman.2013.12.050 ↗
2. International Maritime Organization (IMO) (2021, December 02). SOLAS Chapter II-1, Regulation 26.3. Available online: https://www.imo.org/en/About/Conventions/Pages/International-Convention-for-the-Safety-of-Life-at-Sea-(SOLAS),-1974.aspx.
3. Novel mass air flow meter for automobile industry based on thermal flow microsensor10.1016/j.flowmeasinst.2013.01.006 ↗
4. Marek, J., and Illing, M. (2000, January 10–13). Microsystems for the automotive industry. Proceedings of the International Electron Devices Meeting 2000, San Francisco, CA, USA.
5. A novel microfab-rication technology on organic substrates—Application to a thermal flow sensor10.1088/1742-6596/92/1/012046 ↗
6. Flexible PCB-MEMS Flow Sensor10.1016/j.proeng.2012.09.127 ↗
7. (2021, September 19). UIUC Applied Aerodynamics Group, Department of Aerospace Engineering. Available online: https://m-selig.ae.illinois.edu/ads/coord_database.html.
8. (2021, September 20). NACA Airfoil Series, Available online: https://www.nasa.gov/image-feature/langley/100/naca-airfoils.
9. (2021, September 20). Definition of Streamlines, Available online: https://www.grc.nasa.gov/www/k-12/airplane/stream.html.
10. (2021, April 14). SimScale Online CAE Simulation Platform. Available online: http://www.simscale.com.
11. Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Björkstrand, R., Huotilainen, E., Kukko, K., Kretzschmar, N., Akmal, J., and Jalava, K. (2018). Digital Spare Parts, VTT Technical Research Centre of Finland Ltd.. Available online: http://urn.fi/URN:ISBN:978-952-60-3746-2.
12. Pagonis, D.N., Kaltsas, G., Koutsis, T., and Pagonis, A. (November, January 31). A Novel Engine Air Intake Sensor Based on 3D Printing and PCB Technology. Proceedings of the IEEE Sensors Conference 2021, Virtual.10.1109/SENSORS47087.2021.9639681 ↗
13. Wärtsilä Corp (2021, November 22). Next in the Print Queue: Critical Engine Parts. Available online: https://www.wartsila.com/insights/article/next-in-the-print-queue-critical-engine-parts.
14. (2021, April 14). IVECO N45 MST Technical Manual. Available online: https://www.fptindustrial.com/global/en/engines/off-road/construction/n45.
15. A PCB Based Engine Air Intake Sensor—Application to a Typical Low Power Engine10.1016/j.proeng.2016.11.146 ↗
16. Tabatabaei, H., Boroomand, M., and Taeibi-Rahni, M. (2013). Experimental and Numerical Study of the Effect of Pulsating Flow on the Turbocharger Turbine Performance Parameters. SAE Technical Paper Series, SAE International.10.4271/2013-01-0938 ↗
17. Reynolds number effects on swirling flows intensity and reattachment point over a backward-facing step geometry using STD k-ε turbulence model10.1088/1757-899X/852/1/012073 ↗
18. Jain, R., Sheikh, M.Y., Singh, D., and Tripathi, M. (2020). Numerical Analysis of Joukowski (T = 12%) Airfoil by k-e Turbulence Model at High Reynolds Number. Proceedings in Adaptation, Learning and Optimization, Springer.10.1007/978-3-030-44758-8_29 ↗
19. Modi, V., and Deshpande, V. (2000). A Joukowski airfoil with momentum injection. Atmospheric Flight Mechanics Conference, American Institute of Aeronautics and Astronautics (AIAA).10.2514/6.2000-4108 ↗
20. Versteeg, H.K., and Malalasekera, W. (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Prentice Hall. [2nd ed.].
21. Mahaffey, R.M. (2014). Review and Optimisation of Pump Suction Reducer Selection. [Master’s Dissertation, University of Pretoria].
22. Pal, S., Kabir, S.M.H., and Talukder, M.M.M. (2015, January 26–29). Aerodynamic Analysis of a Concept Car Model. Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015), Chittagong, Bangladesh.
23. On the Kutta Condition in Potential Flow over Airfoil10.1155/2014/676912 ↗
24. (2021, September 19). Airfoil Tools. Available online: http://www.airfoiltools.com.
25. An Overview on 3D Printing Technology: Technological, Materials, and Applications10.1016/j.promfg.2019.06.089 ↗
26. Vishay Intertechnology, Inc. (2019). Temperature Dependent Platinum Thin Film Chip Resistor (RTD) Datasheet, Vishay Intertechnology, Inc.
27. (2021, November 23). IEC 60751:2008 Standard, International Electrotechnical Commission. Available online: https://webstore.iec.ch/publication/3400.
28. Khabari, A., Zenouzi, M., O’Connor, T., and Rodas, A. (2014, January 2–4). Natural and Forced Convective Heat Transfer Analysis of Nanostructured Surface. Proceedings of the World Congress on Engineering 2014, WCE 2014, London, UK.
29. (2021, November 25). Bosch HFM 5 Technical Datasheet. Available online: https://www.bosch-ibusiness.com/media/images/products/sensors/xx_pdfs_1/sensors_i-business.pdf.