journal article·2021-11-15Open access

Development of a New Temporary Attachment Technique for Detecting Debonding of a Composite Structure Using Impedance Based Non-Destructive Testing Method

Dong-Woo Seo, Kyu-San Jung, Yi-Seul Kim, Hyung-Jin Kim, Wongi S. Na

Applied Sciences· Volume 11· Issue 22

Abstract

To date, the application of composite materials has been used throughout the globe due to its advantages, such as corrosion resistance, high strength, design flexibility, and light weight. However, the joining of composite materials is usually achieved with adhesives, where debonding of parts can cause unexpected failure. Thus, detecting and locating defects due to impact or fatigue stresses at an early stage is crucial to ensure safety. Various non-destructive testing (NDT) techniques have been used to detect defects in composite structures, where this study proposes an improved approach of using one of the NDT techniques to detect and locate debonding of glass fiber epoxy plates. Here, the electromechanical impedance (EMI) technique is used with a new way of detecting defects using a movable device. This idea could reduce the overall cost of the monitoring system as the conventional EMI technique requires one to permanently attach a large number of piezoelectric transducers when monitoring large structures. The performance of the proposed idea is tested against another temporary attachment method to investigate the possibility of using the new idea for monitoring debonding in composite structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Korea Institute of Civil Engineering and Building Technology (KICT), Goyang-si 10223, Korea

Department of Civil Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea

References (14)

Show source-provided references
1. In-situ development of highly photocatalytic multifunctional nanocomposites by ultrasonic acoustic method10.1016/j.ultsonch.2017.06.026 ↗
2. A review of non-destructive testing of composite materials10.1016/0308-9126(82)90001-3 ↗
3. Non-destructive inspection of carbon fibre-reinforced plastics using eddy current methods10.1016/0010-4361(92)90435-W ↗
4. Ultrasonic evaluation of matrix damage in impacted composite laminates10.1016/S1359-8368(99)00067-0 ↗
5. Mahmood, A., Noman, M.T., Pechočiaková, M., Amor, N., Petrů, M., Abdelkader, M., and Hassan, S.Z.U. (2021). Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering. Polymers, 13.10.3390/polym13132099 ↗
6. Damage localization in laminated composite plates using mode shapes measured by pulsed TV holography10.1016/j.compstruct.2006.06.034 ↗
7. Applications of infrared thermography for the investigation of historic structures10.1016/j.culher.2003.07.002 ↗
8. Lock-in thermography for nondestructive evaluation of materials10.1016/S0035-3159(98)80047-0 ↗
9. Liang, Y., Feng, Q., Li, D., and Cai, S. (2018). Loosening Monitoring of a Threaded Pipe Connection Using the Electro-Mechanical Impedance Technique—Experimental and Numerical Studies. Sensors, 18.10.3390/s18113699 ↗
10. Zhang, J., Xu, J., Guan, W., and Du, G. (2018). Damage Detection of Concrete-Filled Square Steel Tube (CFSST) Column Joints under Cyclic Loading Using Piezoceramic Transducers. Sensors, 18.10.3390/s18103266 ↗
11. Na, W.S. (2021). A portable bolt-loosening detection system with piezoelectric-based nondestructive method and artificial neural networks. Struct. Health Monit., 14759217211008619.10.1177/14759217211008619 ↗
12. Le, T.C., Phan, T.T.V., Nguyen, T.H., Ho, D.D., and Huynh, T.C. (2021). A Low-Cost Prestress Monitoring Method for Post-Tensioned RC Beam Using Piezoelectric-Based Smart Strand. Buildings, 11.10.3390/buildings11100431 ↗
13. Low cost technique for detecting adhesive debonding damage of glass epoxy composite plate using an impedance based non-destructive testing method10.1016/j.compstruct.2018.01.053 ↗
14. Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer10.1177/1045389X9700800406 ↗