Fault Current and Voltage Estimation for Pole-to-Pole Faults in Modular Multilevel Converter Based DC Grids Considering AC Active Power
Source abstract
Abstract
DC short-circuit faults are one of the challenges for modular multilevel converter (MMC) based DC grid. It is vital for proper design of protection system to estimate the fault currents and voltages. The existing calculation methods based on RLC equivalent model of MMC have enough accuracy in estimating the branch currents but suffer from poor accuracy in estimating the node voltages. To better reflect the dynamics of MMC control during the fault, MMC is equivalent to a RLC series circuit in parallel with a variable controlled current source. This model not only considers the discharge of sub-module capacitors but also the AC active power and MMC control. Then, based on the discrete adjoint model of the equivalent MMC model and the RL series equivalent model of DC lines, the fault voltages and currents for the pre-fault and faulted DC grids could be easily obtained. From the aspect of power balance, the importance of AC active power on estimating the fault currents and voltages is discussed then. At last, based on the Zhangbei bipolar DC grid, comparisons are conducted between the simulations on PSCAD, the numerical calculation under the proposed method and the existing methods. The results show that the proposed method and the existing methods are both able to accurately estimate the fault currents within a relative error of 1%. However, compared with the error of the existing methods in calculating the fault voltages, the relative error for the proposed method is limited to less than 5% for the whole DC gird.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: HVDC Systems and Fault Protection · High-Voltage Power Transmission Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Grid Jiangsu Electric Power Co. Ltd., Economic Research Institute, Nanjing 210008, China
Department of Electrical Engineering, Zhejiang University, Hangzhou 310058, China
References (28)
Show source-provided references
1. Modular multilevel converters for HVDC applications: Review on converter cells and functionalities10.1109/TPEL.2014.2327641 ↗
2. Comparative analysis of multilevel-high-frequency-link and multilevel-DC-link DC-DC transformers based on MMC and dual-active-bridge for MVDC application10.1109/TPEL.2017.2700378 ↗
3. A compact MMC submodule structure with reduced capacitor size using the stacked switched capacitor architecture
4. Xu, Z. (2016). Modular Multilevel Converter-Based High Voltage DC Power Transmission Systems, China Machine Press. [2nd ed.].
5. Multiterminal HVDC networks—What is the preferred topology?10.1109/TPWRD.2013.2277552 ↗
6. Assembly HVDC breaker for HVDC grids with modular multilevel converters10.1109/TPEL.2016.2540808 ↗
7. Multi-port hybrid HVDC circuit breaker10.1109/TIE.2017.2719608 ↗
8. A survey on hybrid circuit-breaker topolo-gies10.1109/TPWRD.2014.2331696 ↗
9. The application of active superconducting DC fault current limiter in hybrid AC/DC power supply systems10.1109/TASC.2008.921888 ↗
10. A fast dc fault detection method using dc reactor voltages in HVDC grids10.1109/TPWRD.2018.2825779 ↗
11. Contribution of fault current sources in multi-terminal HVDC cable networks10.1109/TPWRD.2013.2260359 ↗
12. Transient characteristics under ground and short-circuit faults in a ±500 kV MMC-based HVDC system with hybrid dc circuit breakers10.1109/TPWRD.2018.2795800 ↗
13. Short-circuit current calculation and performance requirement of HVDC breakers for MMC-MTDC systems10.1002/tee.22203 ↗
14. Comprehensive fault type discrimination concept for bipolar full-bridge-based MMC HVDC sys-tems with dedicated metallic return10.1109/TPWRD.2017.2716113 ↗
15. An A pole-to-pole short circuit fault current calculation method for dc grids10.1109/TPWRS.2017.2682110 ↗
16. Electromechanical transient modeling of modular multilevel converter based multi-terminal HVDC systems10.1109/TPWRS.2013.2278402 ↗
17. Modeling and damping control of modular multilevel converter based dc grid10.1109/TPWRS.2017.2691737 ↗
18. Continuous operation of radial multiterminal HVDC systems under dc fault10.1109/TPWRD.2015.2471089 ↗
19. Current sharing in multi-terminal dc grids—The analytical approach10.1109/TPWRS.2018.2849075 ↗
20. An approximate method for the calculation of transmission line fault current in MMC-HVDC grid
21. DC short circuit current calculation for modular multilevel converter
22. Fault current estimation in multi-terminal HVdc grids considering MMC control10.1109/TPWRS.2018.2887166 ↗
23. Langwasser, M., de Carne, G., and Biskoping, M.L.M. (2018, January 23–27). Improved fault current calculation method for pole-to-pole faults in MMC Multi-Terminal HVDC Grids Considering Control Dynamics. Proceedings of the 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, USA.10.1109/ECCE.2018.8557979 ↗
24. Generic Model of MMC-VSC-HVDC for interaction study with AC power system10.1109/TPWRS.2015.2390416 ↗
25. A submodule fault ride-through strategy for modular multilevel converters with nearest level modulation10.1109/TPEL.2017.2679439 ↗
26. A discrete-time low-frequency-ratio nearest level modulation strategy for modular multilevel converters with small number of power modules10.1109/ACCESS.2019.2900488 ↗
27. Arm current control strategy for MMC-HVDC under unbalanced conditions10.1109/TPWRD.2016.2554620 ↗
28. Circulating current suppressing strategy for MMC-HVDC based on nonideal proportional resonant controllers under unbalanced grid conditions10.1109/TPEL.2014.2329059 ↗