New Insights into Cement-Soil Mixtures with the Addition of Fluidized Bed Furnace Bottom Ashes
Source abstract
Abstract
This research is the result of work on implementing a closed-loop economy in geotechnics, which aligns with the broader concept of a circular economy in construction by promoting the use of waste materials and reducing environmental impact. The research presented in the article focuses on the use of fluidized bed furnace bottom ashes, a by-product of coal combustion in fluidized bed boilers, in the production of cement-soil jet grouting slabs. Samples were analyzed for their structural and mechanical properties to assess their suitability for geotechnical applications. The mixtures were distinguished between those using CEM I and those using CEM II. Mixes based on two types of cements had an additional division based on the amount of additives: reference mix, 5% ash, 15% ash, and 10% ash + 5% microsilica. The conducted experiments aim to determine the physico-mechanical parameters of the new mixtures, highlighting the potential of these materials in mining and geotechnical technologies. The research took into account the impact of time over a period of two years for mortars and 28 days for cement-soil. The authors’ studies included determining the compressive strength, bending strength, and imaging using computed tomography. Computed tomography allowed imaging of the internal structure and porosity analysis. Employing CEM II as the primary binding material slows early strength gain, but adding microsilica significantly enhances strength, compaction, and durability. Despite improved properties, CT imaging revealed increased cracking in mixtures with CEM II, indicating reduced water tightness and highlighting areas for further study.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical and Geomechanical Engineering · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Geomechanics, Civil Engineering and Geotechnics, The Faculty of Civil Engineering and Resource Management, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Cracow, Poland
References (48)
Show source-provided references
1. Croce, P., Modoni, G., and Russo, G. (2004). Jet-Grouting Performance in Tunnelling. GeoSupport 2004, American Society of Civil Engineers.10.1061/40713(2004)78 ↗
2. Ground Reaction Curve for Tunnels with Jet Grouting Umbrellas Considering Jet Grouting Hardening10.1016/j.ijrmms.2015.03.021 ↗
3. Numerical Analysis of Tunnelling with Jet-Grouted Canopy10.1016/j.sandf.2015.08.002 ↗
4. Sinkhole Stability Chart for Geotechnical Investigation10.1016/j.trgeo.2024.101191 ↗
5. Why Is the Future Ready for Environmental Geotechnics?10.1680/envgeo.13.00107 ↗
6. Environmental Geotechnics in the US Region: A Brief Overview10.1680/envgeo.14.00024 ↗
7. Enhancing Retaining Wall Stability with Geofoam10.1016/j.heliyon.2024.e33560 ↗
8. Selection of Adequate EPS-Block Geofoam for Use in Embankments Subjected to Seismic Loads10.1016/j.trgeo.2024.101286 ↗
9. Interface Shear Behavior of Geofoam-Sand: A Comprehensive Laboratory Investigation10.1007/s40891-024-00599-3 ↗
10. An Ultra-Lightweight Cellular Concrete for Geotechnical Applications—A Review
11. Field Study on Performance of Jet Grouting in Low Water Content Clay10.1016/j.enggeo.2019.105314 ↗
12. Influence of Nozzle Structure on Effectiveness of Jet Grouting Operations and Its Optimal Design10.1016/j.geoen.2023.211788 ↗
13. Recycling of Ground Jet Grouting Waste as a Supplementary Cementitious Material10.1016/j.resconrec.2023.106993 ↗
14. Mach, A., and Wałach, D. (2024). Implementation of Integrated Life Cycle Design Principles in Ground Improvement and Piling Methods—A Review. Sustainability, 16.10.3390/su16020659 ↗
15. Use of Co-Combustion Bottom Ash to Design an Acoustic Absorbing Material for Highway Noise Barriers10.1016/j.wasman.2013.07.008 ↗
16. Yashwanth Reddy, M., and Harihanandh, M. (Mater. Today Proc., 2023). Experimental Studies on Strength and Durability of Alkali Activated Slag and Coal Bottom Ash Based Geopolymer Concrete, Mater. Today Proc., in press.10.1016/j.matpr.2023.03.644 ↗
17. Experimental Analysis of Embankment on Soft Soil Improved with Bottom Ash Columns10.1016/j.trgeo.2022.100881 ↗
18. Cost and CO2 Emission of Concrete Incorporating Pretreated Coal Bottom Ash as Fine Aggregate: A Case Study10.1016/j.conbuildmat.2023.133706 ↗
19. Fly Ash for Sustainable Construction: A Review of Fly Ash Concrete and Its Beneficial Use Case Studies10.1016/j.clema.2022.100143 ↗
20. Roszczynialski, W., Stępień, P., Roszczynialski, W., Bogusz, K., and Wiśnios, E. (2016). Combustion By-Products from Fluidized Bed Systems as Additives for Concrete, Uboczne Produkty Spalania z Instalacji Fluidalnych Jako Dodatki Do Betonu. Monografie technologii Betonu. IX konferencja Dni Betonu: Tradycja i Nowoczesność: Wisła, 10–12 Października 2016, Association of Cement Producers.
21. Application of Fluidized Bed Furnance Bottom Ash in Civil Engineering—A Review10.1088/1757-899X/1203/3/032013 ↗
22. Brandt, A. (2010). Zastosowanie Popiołów Lotnych z Kotłów Fluidalnych w Betonach Konstrukcyjnych, Polska Akademia Nauk, Komiten Inżynierii Lądowej i Wodnej, Instytut Podstawowych Problemów Techniki.
23. Machine Learning Techniques and Multi-Scale Models to Evaluate the Impact of Silicon Dioxide (SiO2) and Calcium Oxide (CaO) in Fly Ash on the Compressive Strength of Green Concrete10.1016/j.conbuildmat.2023.132604 ↗
24. Anish, C., Venkata Krishnaiah, R., and Vijaya Bhaskar Raju, K. (Mater. Today Proc., 2023). Strength Behavior of Green Concrete by Using Fly Ash and Silica Fume, Mater. Today Proc., in press.10.1016/j.matpr.2023.04.604 ↗
25. Enhancing Concrete Resilience and Sustainability through Fly Ash-Assisted Microbial Biomineralization for Self-Healing: From Waste to Greening Construction Materials10.1016/j.cej.2023.148148 ↗
26. Geotechnical Behavior of Construction Waste (CW) as a Partial Replacement of a Lateritic Soil in Fiber-Reinforced Cement Mixtures10.1007/s10706-020-01533-w ↗
27. (2006). Characterisation of Waste—Leaching—Compliance Test for Leaching of Granular Waste Materials and Sludges—Part 4: One stage Batch Test at a Liquid to Solid Ratio of 10 l/kg for Materials with Particle size Below 10 mm (Without or with Size Reduction) (Standard No. PN-EN 12457-4).
28. Chudoba, J. (1990). Polska Norma Branżowa BN-90/1785-01, Drilling Fluid—Testing Methods in Field Condition, Płuczka Wiertnicza—Metody Badań w Warunkach Polowych, Polish Committee for Standardization.
29. (2010). Methods of Testing Natural Stone—Determination of Density, Bulk Density, and Total and Open Porosity, Metody Badań Kamienia Naturalnego—Oznaczanie Gęstości i Gęstości Objętościowej Oraz Całkowitej i Otwartej Porowatości (Standard No. PN-EN 1936:2010).
30. Multiscale X-ray Tomography of Cementitious Materials: A Review10.1016/j.cemconres.2019.105824 ↗
31. (2016). Methods of Testing Cement—Part 1: Determination of Strength, Metody Badania Cementu—Część 1: Oznaczanie Wytrzymałości (Standard No. PN-EN 196-1:2016).
32. Beam Hardening Correction for X-ray Computed Tomography of Heterogeneous Natural Materials10.1016/j.cageo.2014.03.003 ↗
33. Kaczmarczyk, G.P., and Cała, M. (2023). Possible Application of Computed Tomography for Numerical Simulation of the Damage Mechanism of Cementitious Materials—A Method Review. Buildings, 13.10.3390/buildings13030587 ↗
34. Characterization of Internal Pore Size Distribution and Interconnectivity for Asphalt Concrete with Various Porosity Using 3D CT Scanning Images10.1016/j.conbuildmat.2023.132751 ↗
35. Kaczmarczyk, G.P., Kinasz, R., Bilozir, V., and Bidenko, I. (2022). Application of X-ray Computed Tomography to Verify Bond Failures Mechanism of Fiber-Reinforced Fine-Grain Concrete. Materials, 15.10.3390/ma15062193 ↗
36. Evolution of Pore Structure of Microcapsule Self-Healing Concrete during Ultrasonic Triggering10.1016/j.jobe.2023.108332 ↗
37. Tunnel Lining Design Using the Convergence Control Method, Projektowanie Obudowy Tunelu z Wykorzystaniem Metody Kontroli Konwergencji
38. The Statistical Analysis of Relation between Compressive and Tensile/Flexural Strength of High Performance Concrete10.1515/ace-2015-0110 ↗
39. (2008). Eurocode 2: Design of Concrete Structures. Parts 1–2: General Rules. Structural Fire Design (Standard No. EN 1992-1-2:2008/NA:2010P).
40. (2022). Building Code Requirements for Structural Concrete and Commentary (Reapproved 2022) (Standard No. ACI CODE-318-19(22)).
41. Fédération Internationale du Béton (FIB) (2010). Model Code 2010, Fédération Internationale du Béton.
42. Evaluating the Co-Relationship between Concrete Flexural Tensile Strength and Compressive Strength10.1504/IJSTRUCTE.2014.060902 ↗
43. Investigating the Properties of Jet Grouting Columns with Fine-Grained Cement and Silica Fume10.1016/j.conbuildmat.2020.120637 ↗
44. Influence of Aggregates Grading and Water/Cement Ratio in Workability and Hardened Properties of Mortars10.1016/j.conbuildmat.2010.11.011 ↗
45. Determination of Groundwater Buoyancy Reduction Coefficient in Clay: Model Tests, Numerical Simulations and Machine Learning Methods10.1016/j.undsp.2023.06.001 ↗
46. Balotiya, G., Gaur, A., Somani, P., and Sain, A. (Mater. Today Proc., 2023). Investigating Mechanical and Durability Aspects of Concrete Incorporating Wollastonite and Bottom Ash, Mater. Today Proc., in press.10.1016/j.matpr.2023.06.048 ↗
47. Effect of Coal Bottom Ash as Partial Replacement of Sand on Properties of Concrete10.1016/j.resconrec.2012.12.006 ↗
48. Incinerator Bottom Ash as a Supplementary Material for Green Concrete and Mortar10.1016/j.matpr.2023.07.117 ↗