Computational Methodology for the Development of Wrinkled Tubes by Plastic Deformation
Source abstract
Abstract
Traditional methods for wrinkled tubes involve welding processes and additional elements, such as plates, screws, rivets, and guides. Considering all the limitations of these processes, this work aims to propose a methodology that allows for maximising the manufacturing process of carbon steel tube joints with seaming using cold forming and minimising the cost of the final product. Therefore, the present work aims to develop a computational model, based on the finite element method, to optimise the deformation process of T6 Aluminium tubes (ø 45 × ø 38.6 mm) with a length of 120 mm. The method uses a steel die with cavities to achieve wrinkled tubes by a forming process. This numerical study was carried out using the Ansys® 2022 R2 software. A nonlinear material and an incremental structural analysis were used. The applied methodology allowed the optimisation of process parameters, the application of forces during tube deformation, the geometry of the die cavity, boundary conditions, and mesh discretisation. Numerical modelling was carried out using the axial symmetry of the assembly (tube–die), enabling a simplified and efficient execution of the final tube geometry. The results were analysed based on the maximum pressure applied to the tube, and the vertical and horizontal displacements of the deformed component, thus obtaining the tube flow with complete filling inside the die cavity at the end of deformation. The die geometry that produced the best results presented a cavity with a radius of curvature of 3 mm, 6 mm in height, and with a depth of 4 mm. The optimised result of the die geometry generated satisfactory results, with the displacement on the x-axis of the tube of approximately 2.85 mm, ensuring the filling of the cavity at the end of the process. For this, the maximum pressure exerted on the tube was approximately 374 MPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Structural Analysis and Optimization · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Pontifícia Universidade Católica de Minas Gerais—PUC Minas, Avenida Dom José Gaspar, 500—Campus Coração Eucarístico—CEP., Belo Horizonte 30545-901, MG, Brazil
Mechanical Engineering Department, School of Engineering, Polytechnic Institute of Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal
Funding
Coordination for the Improvement of Higher Education Personnel-Brazil (CAPES)
References (39)
Show source-provided references
1. A state-of-the-art review of hydroforming technology10.1007/s12289-019-01507-1 ↗
2. An improved two-arcs deformational theoretical model of the expansion tubes10.1016/j.ijmecsci.2017.08.036 ↗
3. Experimental Study of Hydroformed Al6061T4 Elliptical Tube Samples under Different Internal Pressures10.24003/emitter.v10i2.699 ↗
4. Friction welding of dissimilar joints copper-stainless steel pipe consist of 0.06 wall thickness to pipe diameter ratio10.1016/j.jmapro.2021.06.050 ↗
5. Joining sheet panels to thin-walled tubular profiles by tube end forming10.1016/j.jclepro.2010.12.014 ↗
6. A comprehensive review of loosening detection methods for threaded fasteners10.1016/j.ymssp.2021.108652 ↗
7. Investigation into wrinkling behavior of thin-walled 5A02 aluminum alloy tubes under internal and external pressure10.1016/j.ijmecsci.2014.12.017 ↗
8. Budynas, R.G., and Nisbett, J.K. (2008). Shigley’s Mechanical Engineering Design, McGraw Hill.
9. Miller, G.G. (2003). Tube Forming Processes: A Comprehensive Guide, Society of Manufacturing Engineers.
10. Research on flattening behavior of wrinkled 5A02 aluminum alloy tubes under internal pressure10.1007/s00170-016-8529-0 ↗
11. Joining by forming technologies: Current solutions and future trends10.1007/s12289-022-01674-8 ↗
12. Double-sided self-pierce riveting10.1007/s00170-020-05503-7 ↗
13. Numerical Investigation of Process Parameters on External Inversion of Thin-Walled Tubes10.1007/s11665-014-1041-5 ↗
14. Hwang, Y.-M., Pham, H.-N., and Tsui, H.-S.R. (2021). Investigation of Punch Shape and Loading Path Design in Hydro-Flanging Processes of Aluminum Alloy Tubes. Metals, 11.10.3390/met11040636 ↗
15. Bending fracture strength of the pipe joint using iron-based shape memory alloy (Fe-SMA) subjected to different expansion methods at various deformation rates10.1016/j.engstruct.2022.114669 ↗
16. Numerical simulation and experimental study of warm hydro-forming of magnesium alloy sheet10.1016/j.jmapro.2022.05.054 ↗
17. Joining of EN AW 6060 Pipes by Plastic Forming
18. FEM-DEM coupling analysis for solid granule medium forming new technology10.1016/j.jmatprotec.2017.05.024 ↗
19. Le, T.-K., and Bui, T.-A. (2021). Cold Forging Effect on the Microstructure of Motorbike Shock Absorbers Fabricated by Tube Forming in a Closed Die. Appl. Sci., 11.10.3390/app11052142 ↗
20. Pipe joining by mechanical conformation in thin sheets with rotary locking via a notch10.1016/j.engstruct.2021.113151 ↗
21. Increasing flexibility of self-pierce riveting using numerical and statistical methods10.1016/j.promfg.2019.02.137 ↗
22. Finite element formulation for the simulation of hot sheet metal forming processes10.1016/0020-7225(88)90101-2 ↗
23. Optimization and inverse analysis in metal forming: Scientific state-of-the-art and recent trends10.1007/s12289-022-01690-8 ↗
24. Numerical simulations in optimisation of product and forming process10.1016/S0924-0136(01)00744-0 ↗
25. Starman, G., Cafuta, G., and Mole, N. (2021). A Method for Simultaneous Optimization of Blank Shape and Forming Tool Geometry in Sheet Metal Forming Simulations. Metals, 11.10.3390/met11040544 ↗
26. Investigation on Billets and Tools Geometry in Cold Forging of the Straight Bevel Gear10.18517/ijaseit.12.2.15977 ↗
27. Wu, W., Zeng, T., Hao, W., and Jiang, S. (2022). Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced with In-Situ TiB2 Particles. Front. Mater., 9.10.3389/fmats.2022.817376 ↗
28. A new deformation assisted tube-to-tubesheet joining process10.1016/j.tws.2021.107784 ↗
29. Memon, S., and Nikhare, C.P. (November, January 30). Investigation of tube sheet joining through hydroforging process. Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE) (Advanced Manufacturing Article V02AT02A052), Columbus, OH, USA.
30. Joining by electromagnetic forming
31. A novel mechanical joining method for sheet-tube structures by annular ring compression10.1016/j.tws.2023.111031 ↗
32. Interference-fit joining of aluminium tubes by electromagnetic forming10.4028/www.scientific.net/AMR.853.488 ↗
33. Frictional Behaviors of a Mild Steel and a TRIP780 Steel Under a Wide Range of Contact Stress and Sliding Speed10.1115/1.4026346 ↗
34. Experimental Analysis of Interference-Fit Joining of Aluminum Tubes by Electromagnetic Forming10.1109/TASC.2020.2972499 ↗
35. Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations10.1088/0965-0393/17/7/075012 ↗
36. Numerical simulations for studying the influence of friction in forging
37. Numerical Simulation on Optimization of Process Parameters for Free Bending of Metal Tubes10.1155/2022/4173457 ↗
38. Phan, T.H.L., Luyen, T.T., and Nguyen, D.T. (2023). A Study Utilizing Numerical Simulation and Experimental Analysis to Predict and Optimize Flange-Forming Force in Open-Die Forging of C45 Billet Tubes. Appl. Sci., 13.10.3390/app13169063 ↗
39. Investigation of U-head rotational stiffness in formwork supporting scaffold systems10.1016/j.engstruct.2017.01.007 ↗