Research on the Deformation Mechanism of Railway Subgrade under Buried Strike–Slip Fault Dislocation

With the gradual densification of China’s railway network, more and more railways are inevitably crossing active fault zones. Creep dislocation and stick–slip dislocation of the fault zones can lead to uneven deformation and cracks in the railway subgrade, threatening the sustainability of the railway. Therefore, a model test and numerical simulation were used to analyze the deformation mechanism and sustainability of the subgrade and foundation induced by a strike–slip fault dislocation in a flat site under different angles between the subgrade and fault strikes. The test and simulation results show that (1) under the influence of strike–slip fault dislocation, the horizontal direction of the subgrade appeared to have an S–shaped displacement. The top surface of the subgrade appeared to have a vertical settlement. Further, tension–shear cracks and compression crush zones appeared on the subgrade’s surface. (2) When the angle between the fault and subgrade strikes increased, the subgrade’s uneven deformations induced by fault dislocation first decreased and then increased. The angle between the main tension–shear crack on the top surface of the subgrade and the fault strike showed a trend of increasing and then decreasing. In addition, the compressive stress along the subgrade strike decreased, while the tensile stress along the subgrade strike gradually increased. (3) The tension–shear cracks in the subgrade and foundation were spiral and converged to the basement strike–slip fault along the depth direction. This study provides a reference for the safe operation and sustainability of railways near faults.