Blasting Vibration Control and Signal Analysis of Adjacent Existing Deterioration Tunnels
Source abstract
Abstract
Building a new tunnel adjacent to an existing tunnel has become a common means of transformation in engineering. Existing tunnels are prone to some deterioration, such as cavities and cracks under long-term traffic load. This kind of deterioration tunnel is prone to collapsing under the action of blasting. Therefore, the vibration caused by blasting should be strictly controlled. Based on the reconstruction project of the Bo Jiling Tunnel, this paper puts forward the method of mechanical cutting in a central position combined with an ordinary detonator to reduce blasting vibrations. ANSYS/LS-DYNA version 19.2, was used to simulate two conditions of full-section blasting and central mechanical cutting blasting. By comparing the stress and velocity of the existing tunnel, the damping effect of mechanical cutting blasting is analyzed. Via field experiments, the superiority of the mechanical cutting method in reducing blasting vibration is further discussed. At the same time, the relationship between the main vibration frequency and the peak velocity of the existing deterioration tunnel is obtained by wavelet packet analysis of the field experimental data. The frequency band energy distribution in each direction of vibration velocity is also obtained. The results show that the central mechanical cutting increases the blasting free surface, and the mechanical cutting method reduces the vibration velocity by 36.3%. The third frequency band (31.25~46.875 Hz) is the most concentrated, which is the dominant frequency band of the signal. The novelty of this paper is to propose mechanical cutting of the central hole instead of traditional blasting for existing deterioration tunnels. The feasibility of this method is verified by numerical simulation and field tests. The relationship between peak vibration velocity, band energy, and tunnel frequency is clarified, which can better control blasting vibration and ensure the safety of existing deterioration tunnels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Blasting Impact and Analysis · Rock Mechanics and Modeling · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Beijing Key Laboratory of Urban Underground Space Engineering, School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
Funding
National Natural Science Foundation of China (NSFC)
References (30)
Show source-provided references
1. Vibration safety impact assessment and technical measures for vibration reduction in blasting engineering
2. Explosive dosage calculation based on blasting vibration velocity and control value
3. Study on evaluation of shock-absorbing blasting scheme for urban underground tunnel driving
4. Shock absorption control during underground excavation, drilling and explosion in subway engineering
5. Reasonable differential time interval of urban tunnel crossing composite strata
6. Application of high precision digital detonator in vibration reduction of blasting construction
7. Interference vibration reduction technique of ultra-short delay step blasting between holes
8. Experimental Study on Vibration Reduction Technology of Hole-by-Hole Presplitting Blasting10.1155/2021/5403969 ↗
9. Application of digital detonator staggered shock absorption blasting technology in subway tunnel construction
10. Vibration reduction technology and the mechanisms of surrounding rock damage from blasting in neighborhood tunnels with small clearance10.1016/j.ijmst.2022.10.009 ↗
11. Vibration reduction effect of damping hole in blasting excavation of small distance tunnel
12. Study on staggered peak vibration reduction by triangular cut blasting in urban shallow buried tunnels
13. Wavelet packet analysis on blasting vibration signal under different cutting method10.21595/jve.2021.22128 ↗
14. Improving purity of blasting vibration signals using advanced Empirical Mode Decomposition and Wavelet packet technique10.1016/j.apacoust.2022.109097 ↗
15. Denoising algorithm of blasting signal based on Fourier decomposition and wavelet packet analysis
16. Characteristic analysis of energy entropy of blasting vibration signal based on wavelet packet transformation
17. Main frequency band of blast vibration signal based on wavelet packet transform10.1016/j.apm.2019.05.005 ↗
18. Wavelet packet analysis of blasting vibration signal of mountain tunnel10.1016/j.soildyn.2018.11.025 ↗
19. Theoretical and numerical simulation investigation of deep hole dispersed charge cut blasting10.1007/s40789-023-00571-y ↗
20. Wu, H.J., Gong, M., Zhao, Q., Wu, X.D., and Liu, X.Y. (2022). Vibration Energy Comparison Helps Identify Formation Time of New Free Surface in Urban Tunnel Blasting. Appl. Sci., 19.10.3390/app121910061 ↗
21. Research on numerical simulation method of limestone impact failure based on HJC constitutive model
22. Wavelet packet analysis of controlled excavation blasting signals in a nclear power plant
23. Wavelet packet analysis of tunneling blasting vibration on earth surface
24. Study on energy attenuation characteristics of blasting signals based on wavelet packet transform
25. Application of energy criterion in blasting vibration safety
26. Experimental study on vibration characteristics of deep-hole step blasting in near and far regions
27. Orthonormal bases of compactly supported wavelets10.1002/cpa.3160410705 ↗
28. Vibration characteristics analysis of the metro tunnel subarea blasting based on wavelet packet technology
29. Study on energy distribution characteristics of blasting vibration and microseismic signal of rock failure
30. Wavelet packet analysis of blasting vibration signal of frozen vertical shaft model