journal article·2024-02-19Open access

Effects of Pipe Deflection and Arching on Stress Distribution and Lateral Earth Pressure Coefficient in Buried Flexible Pipes

Murat Gulen, Havvanur Kilic

Applied Sciences· Volume 14· Issue 4

Abstract

In this study, full-scale laboratory tests were conducted on a 315 mm diameter HDPE pipe under shallow buried and localised surface loading conditions to investigate the effects of pipe deflection and arching on stress distribution and the lateral earth pressure coefficient. The tests were validated using 2D finite element software, and further analyses were carried out through parametric studies. These studies considered variations in pipe stiffness, burial depth, backfill properties and pavement stiffness to increase the reliability of the test results. For a shallowly buried HDPE pipe, a comprehensive explanation is provided regarding the evolution of the lateral earth pressure coefficient within the central soil prism. Initially set at Ko conditions, this coefficient tends to shift towards Kp with increasing arching and transitions to Ka with weakening arching. The findings suggest that stress predictions in the crown region of shallow buried flexible pipes are achievable through the application of Terzaghi’s arching theory, contingent upon an accurate estimation of the lateral earth pressure coefficient for the central soil prism. Furthermore, the horizontal deflection of the pipe at the springline results in compressive behaviour and passive effects in the surrounding backfill in this specific region. This situation demonstrates that the horizontal stresses at the springline and the lateral earth pressure coefficient can be reliably estimated by considering them as functions of the horizontal deflection of the pipe.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Yildiz Technical University, 34220 İstanbul, Türkiye

Funding

Yıldız Technical University (YTU) BAP Coordination Unit

References (58)

Show source-provided references
1. Biaxial Testing to Investigate Soil-Pipe Interaction of Buried Fiber-Reinforced Cement Pipe10.3141/1868-18 ↗
2. Moser, A.P., and Folkman, S. (2008). Buried Pipe Design, McGraw-Hill. [3rd ed.].
3. NCHRP (National Cooperative Highway Research Program) (1999). Report 429: Transportation Research Board National Research Council HDPE Pipe: Recommended Material Specifications and Design Requirements, National Academy Press.
4. CPPA (Corrugated Polyethylene Pipe Association) (2006). Recommended Installation Practices for Corrugated Polyethylene Pipe and Fittings, CPPA.
5. AASHTO (2007). Load and Resistance Factor Design Bridge Design Specifications, American Association of State Transportation Officials. [4th ed.].
6. Structural deformation characteristics of installed HDPE circular pipelines10.1061/(ASCE)TE.1943-5436.0000091 ↗
7. Field performance and analysis of 3-m-diameter induced trench culvert under a 19.4-m soil cover10.3141/2045-08 ↗
8. Earth pressure distribution on a rigid box covered with u-shaped geofoam wrap10.1007/s40891-017-0088-4 ↗
9. Finite element analysis for deeply buried concrete pipes in proposed imperfect trench installations with expanded polystyrene (EPS) foams10.1016/j.engstruct.2019.03.083 ↗
10. Effects of using eps geofoam as compressible inclusion on hdpe pipe behavior10.1061/(ASCE)PS.1949-1204.0000368 ↗
11. Earth pressure distribution on buried pipes installed with geofoam inclusion and subjected to cyclic loading10.1007/s40891-020-0187-5 ↗
12. Al-Naddaf, M., Rasheed, S.E., Rahmaninezhad, S.M., and Han, J. (2021, January 22–25). Effects of geofoam geometry and location on vertical stresses on buried culverts during construction and under surface loading. Proceedings of the Geosynthetics Conference 2021, Online.
13. Innovative application of tire-derived aggregate around corrugated steel plate culverts10.1061/(ASCE)PS.1949-1204.0000466 ↗
14. An experimental evaluation of geocell and eps geofoam as means of protecting pipes at the bottom of repeatedly loaded trenches10.1061/(ASCE)GM.1943-5622.0001624 ↗
15. Analysis and behaviour of buried culverts with slotted joints
16. Masajedian, S. (2011). Experimental Investigation of the Behaviour of the Steel Reinforced High Density Polyethylene and Corrugated Metal Pipe. [Master’s Thesis, The University of Texas at Arlington].
17. Structural design of buried corrugated polyethylene pipes
18. Klaiber, F.W., Lohnes, R.A., Wipt, T.J., Conard, B.E., and Ng, K.W. (1997). Investigation of High Density Polyethylene Pipe for Highway Applications, Final Rep.: Phase II, Iowa DOT Project HR-373A; Iowa State University.
19. Analysis of repeated-load field testing of buried plastic pipes10.1061/(ASCE)0733-947X(2000)126:3(271) ↗
20. Profile-Wall High-Density Polyethylene Pipes 1050 mm in Diameter under Deep Soil Cover: Comparisons of Field Performance Data and Analytical Predictions10.3141/1814-22 ↗
21. Field test performance of buried flexible pipes under live truck loads10.1061/(ASCE)CF.1943-5509.0000624 ↗
22. Influence of Backfill Compaction on Mechanical Characteristics of High-Density Polyethylene Double-Wall Corrugated Pipelines10.1155/2019/3960864 ↗
23. Marston, A., and Anderson, A.O. (1913). The Theory of Loads on Pipes in Ditches and Tests of Cement and Clay Drain Tile and Sewer Pipes, Iowa Engineering Station. Bulletin 3I.
24. Marston, A. (1930). The Theory of External Loads on Closed Conduits in the Light of the Latest Experiments, Iowa Engineering Experiment Station. Bulletin 96.
25. Terzaghi, K. (1936, January 22–26). Stress distribution in dry and in saturated sand above a yielding trapdoor. Proceedings of the 1st International Conference on Soil Mechanics and Foundation Engineering, Harvard, MA, USA.
26. Terzaghi, K. (1943). Theoretical Soil Mechanics, Wiley.10.1002/9780470172766 ↗
27. Cover requirements of thermoplastic pipes used under highways10.1016/j.compositesb.2013.06.025 ↗
28. Fang, H., Tan, P., Du, X., Li, B., Yang, K., and Zhang, Y. (2020). Numerical and Experimental Investigation of the Effect of Traffic Load on the Mechanical Characteristics of HDPE Double-Wall Corrugated Pipe. Appl. Sci., 10.10.3390/app10020627 ↗
29. Über den Erdduck gegen innere Stützwände (Tunnelwande)
30. A study of the trap-door problem in a granular mass10.1139/t69-001 ↗
31. Evans, C.H. (1983). An Examination of Arching in Granular Soils. [Ph.D. Thesis, Massachusetts Institute of Technology].
32. Failure mechanisms in sand over a deep active trapdoor10.1061/(ASCE)GT.1943-5606.0000134 ↗
33. Experimental and discrete element modeling studies of the trapdoor problem: Influence of the macro-mechanical frictional parameters10.1007/s11440-011-0152-5 ↗
34. Investigation of soil arching with centrifuge tests10.1061/(ASCE)GT.1943-5606.0000998 ↗
35. An improved 3D wedge-prism model for the face stability analysis of the shield tunnel in cohesionless soils10.1007/s11440-014-0304-5 ↗
36. A new model to predict soil pressure acting on deep burial jacked pipes10.1016/j.tust.2016.09.005 ↗
37. Centrifugal model tests on face failure of earth pressure balance shield induced by steady state seepage in saturated sandy silt ground10.1016/j.tust.2018.06.031 ↗
38. Experimental investigation of soil arching mobilization and degradation under localised surface loading10.1061/(ASCE)GT.1943-5606.0002190 ↗
39. A composite function model for predicting the ground reaction curve on a trapdoor10.1016/j.compgeo.2021.104581 ↗
40. Mechanics of arch action in soil arching10.1007/s11440-022-01697-0 ↗
41. Numerical Investigation of Earth Pressure Reduction on Buried Pipes Using EPS Geofoam Compressible Inclusions
42. Spangler, M.G. (1941). The Structural Design of Flexible Pipe Culverts, Bulletin 153; Iowa Engineering Experiment Station.
43. (2000). Static Calculation of Drains and Sewers (Standard No. ATV-DVWK-A 127E).
44. Evaluation of side wall frictionfor a buried pipe testing facility10.1016/S0266-1144(99)00004-7 ↗
45. The Performance of a Laboratory Facility for Evaluating the Structural Response of Small-Diameter Buried Pipes10.1139/t00-102 ↗
46. Akınay, E. (2017). Sıkışabilir Yatak Malzemesi Kullanımının Gömülü Esnek Boru Davranışı Üzerindeki Etkilerinin İncelenmesi. [Ph.D. Thesis, Graduate School of Science and Engineering, Yildiz Technical University]. (In Turkish).
47. Two-dimensional analyses of thermoplastic culvert deformations and strains10.1061/(ASCE)1090-0241(2004)130:2(199) ↗
48. Analysis of local bending in twin-wall pipes: Comparison with measurements
49. Al-Abri, D.S., and Mohamedzein, Y.E.A. (2010). Pipelines: Climbing New Peaks to Infrastructure Reliability: Renew, Rehab, and Reinvest, American Society of Civil Engineers.
50. Mechanical response of buried High-Density Polyethylene pipelines under normal fault motions10.1007/s12205-015-0695-3 ↗
51. Kilic, H., Bicer, P., and Bozkurt, S. (2023). A Numerical Investigation of Induced and Embedded Trench Installations for Large-Diameter Thermoplastic Pipes under High Fill Stresses. Appl. Sci., 13.10.3390/app13053040 ↗
52. Discussion of Stability and stiffness of cellular cofferdams by Karl Terzaghi
53. Trap-door problem with dry sand: A statical approach based upon model test kinematics. Int10.1002/nag.1610050106 ↗
55. Centrifuge modeling of granular soil response over active circular trapdoors10.3208/sandf.47.931 ↗
56. Experimental and theoretical investigations on evolution of soil-arching effect in 2D trapdoor problem10.1061/(ASCE)GM.1943-5622.0001643 ↗
57. Experimental investigations of backfill conditions on the performance of high-density polyethelene pipes10.1111/j.1747-1567.2010.00691.x ↗
58. Short-term and long-term behaviours of buried corrugated high-density polyethylene (HDPE) pipes10.1016/j.compositesb.2009.01.006 ↗