Working Face Stability of Box Shield Tunneling under Non-Uniform Support Pressure
Source abstract
Abstract
This paper proposes a theoretical model for the stability analysis of a box tunnel face in non-cohesive soils considering the uneven distribution of support pressure caused by multiple cutter heads and screw conveyors. The support pressure distribution on the tunnel face is concave. Accordingly, the failure mechanism is composed of a prism and a wedge, both including three blocks. The relatively smaller support pressure acting on the middle blocks lead to the tendency of slide. Assuming that the support pressure acting on the side blocks is obtained using the active earth pressure coefficient, the support pressure acting on block II can be achieved by limit equilibrium analysis considering the interactions between the blocks. The influences of strength parameters and geometric parameters on the tunnel face stability are discussed in the parametric analysis. For comparison, numerical analysis is conducted in the commercial software OptumG3. It is found that the results given by the proposed model agree well with those from the numerical model. Therefore, the rationality of the proposed model in predicting the collapse geometry is verified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Analysis · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Rail Transportation, Soochow University, Suzhou 215131, China
Powerchina Huadong Engineering Corporation Limited, Hangzhou 311122, China
Funding
National Natural Science Foundation of China · Powerchina Huadong Engineering Corporation Limited · Key R&D Program of Zhejiang Province
References (43)
Show source-provided references
1. The stability of shallow tunnels and underground openings in cohesive material10.1680/geot.1980.30.4.397 ↗
2. Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material10.1680/geot.1990.40.4.581 ↗
3. Three-dimensional passive earth pressures by kinematical approach10.1061/(ASCE)1090-0241(2000)126:11(969) ↗
4. Face Stability Analysis of Circular Tunnels Driven by a Pressurized Shield10.1061/(ASCE)GT.1943-5606.0000194 ↗
5. Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield10.1002/nag.962 ↗
6. Continuous velocity fields for collapse and blow-out of a pressurized tunnel face in purely cohesive soil10.1002/nag.2121 ↗
7. Face Stability Analysis for a Shield-Driven Tunnel in Anisotropic and Nonhomogeneous Soils by the Kinematical Approach10.1061/(ASCE)GM.1943-5622.0000569 ↗
8. Upper-bound analysis on the face stability of a non-circular tunnel10.1016/j.tust.2016.11.010 ↗
9. Three dimensional face stability of a tunnel in weak rock masses subjected to seepage forces10.1016/j.tust.2017.11.003 ↗
10. An upper bound solution for tunnel face stability analysis considering the free span10.1016/j.tust.2020.103515 ↗
11. Shallow tunnel face stability considering pore water pressure in non-homogeneous and anisotropic soils10.1016/j.compgeo.2019.103205 ↗
12. Analytical analysis of working face passive stability during shield tunneling in frictional soils10.1007/s11440-018-0753-3 ↗
13. Upper bound analysis of working face passive failure in large-diameter shield tunneling based on a composite mechanism10.1016/j.compgeo.2021.104362 ↗
14. Analysis on face stability of rectangular cross-sectional shield tunneling based on an improved two-dimensional rotational mechanism10.1007/s11440-021-01219-4 ↗
15. Influence of permeability anisotropy of seepage flow on the tunnel face stability10.1016/j.undsp.2022.04.009 ↗
16. Jancsecz, S., and Steiner, W. (1994, January 5–7). Face support for a large mix-shield in heterogeneous ground conditions. Proceedings of the Tunnelling 1994, London, UK.10.1007/978-1-4615-2646-9_32 ↗
17. Broere, W. (2001). Tunnel Face Stability and New CPT Applications. [Ph. D. Thesis, Delft University].
18. The contribution of horizontal arching to tunnel face stability10.1002/gete.201100024 ↗
19. Soil Mass Stability at the Working Face of a Rectangular Pipe-Jacking Tunnel with a Large Section
20. Calculation on Active Limit Support Pressure of Shield Tunnel Excavation Face in Dry Cohesionless Soil
21. Face stability of shallow tunnelling in sandy soil considering unsupported length10.1016/j.tust.2020.103445 ↗
22. The impact of shallow cover on stability when tunnelling in soft soils10.1016/j.tust.2015.09.005 ↗
23. Wei, G. (2005). Theoretical Study on Properties of Soil and Structure during Pipe Jacking Construction. [Ph. D. Thesis, Zhejiang University].
24. Calculation of minimal support pressure acting on shield face during pipe jacking in sandy soil
25. Analysis of the interaction between tunnel support and surrounding rock considering pre-reinforcement10.1016/j.tust.2021.104074 ↗
26. Analytical solutions for deep tunnels in strain-softening rocks modeled by different elastic strain definitions with the unified strength theory10.1007/s11431-022-2158-9 ↗
27. Scientific problems and research proposals for Sichuan-Tibet railway tunnel construction10.1016/j.undsp.2021.10.002 ↗
28. Analysis of working face stability during obstruction removal from a box tunnel machine10.1007/s11440-022-01550-4 ↗
29. Modeling dynamic responses of a cross-river road shield tunnel under stochastic vehicle loads10.1016/j.tust.2020.103432 ↗
30. Seismic time-history response and system reliability analysis of slopes considering uncertainty of multi-parameters and earthquake excitations10.1016/j.compgeo.2021.104245 ↗
31. Shallow Tunnels in Cohesionless Soil: Stability of Tunnel face10.1061/(ASCE)0733-9410(1994)120:7(1148) ↗
32. Experimental study on face instability of shield tunnel in sand10.1016/j.tust.2012.08.001 ↗
33. Large-scale tests on face stability of shield tunnelling in dry cohesionless soil
34. Study of limit supporting force of excavation face’s passive failure of shield tunnels in sand strata
35. An improved 3D wedge-prism model for the face stability analysis of the shield tunnel in cohesionless soils10.1007/s11440-014-0304-5 ↗
36. Centrifuge and numerical investigation of passive failure of tunnel face in sand10.1016/j.tust.2011.12.004 ↗
37. Investigation of passive failure and deformation mechanisms due to tunnelling in clay10.1139/cgj-2012-0098 ↗
38. The effect of pore water pressure on tunnel face stability10.1002/nag.2528 ↗
39. Face stability analysis of shield driven tunnels shallowly buried in dry sand using 1 g large-scale model tests10.1007/s11440-017-0607-4 ↗
40. Physical model tests and discrete element simulation of shield tunnel face stability in anisotropic granular media10.1007/s11440-020-01041-4 ↗
41. Model test study on the stability of cobble strata during shield under-crossing10.1016/j.tust.2020.103807 ↗
42. Experimental investigation of mechanical characteristics for linings of twins tunnels with asymmetric cross-section10.1016/j.tust.2021.104209 ↗
43. Model test and numerical analysis for the face failure mechanism of large cross-section tunnels under different ground conditions10.1016/j.tust.2022.104735 ↗