A novel approach of jet polishing for interior surface of small-grooved components using three developed setups
Source abstract
Abstract
Highlights A novel approach of multi-phase jet polishing is proposed using a developed polisher, consisting of solid, liquid and gas phases. An abrasive air jet polishing is suggested through a customized polisher, including solid and gas phases. After jet polishing, surface roughness Sa decreases from pristine 8.596 to 0.701 and 0.336 μm, and Sa reduces 92% and 96%, respectively. Defect volume of unit area achieved by optimized parameters lessens 1/12 that of non-optimized ones.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
3. High-strength Damascus steel by additive manufacturing10.1038/s41586-020-2409-3 ↗
4. Investigations on effect of evaporator length on heat transport of axially grooved ammonia heat pipe10.1016/j.applthermaleng.2019.01.078 ↗
5. Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: a comprehensive numerical study10.1016/j.apenergy.2019.03.043 ↗
6. An introduction to additive manufactured heat pipe technology and advanced thermal management products10.1016/j.tsep.2021.100941 ↗
7. Additive manufacturing of heat exchangers: a case study on a multi-layered Ti-6Al-4V oscillating heat pipe10.1016/j.addma.2015.09.003 ↗
8. Condensation heat transfer and pressure drop characteristics of R-134a in horizontal smooth tubes and enhanced tubes fabricated by selective laser melting10.1016/j.ijheatmasstransfer.2018.04.163 ↗
9. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: a review10.1016/j.rser.2018.03.109 ↗
10. State of the art on chemical and electrochemical based finishing processes for additive manufactured features10.1016/j.addma.2022.103028 ↗
11. Compressive mechanical properties and shape memory effect of NiTi gradient lattice structures fabricated by laser powder bed fusion10.1088/2631-7990/ac8ef3 ↗
12. Overview on additive manufacturing technologies10.1109/JPROC.2016.2625098 ↗
13. Effect of processing parameters on overhanging surface roughness during laser powder bed fusion of AlSi10Mg10.1016/j.jmapro.2020.11.030 ↗
14. A comprehensive model to predict friction factors of fluid channels fabricated using laser powder bed fusion additive manufacturing10.1016/j.addma.2021.102212 ↗
15. Surface roughness of selective laser melted Ti-6Al-4V alloy components10.1016/j.addma.2018.02.009 ↗
16. A novel method for manufacturing sintered aluminium heat pipes (SAHP)10.1016/j.applthermaleng.2012.12.011 ↗
17. How build angle and post-processing impact roughness and corrosion of additively manufactured 316L stainless steel10.1038/s41529-020-00126-5 ↗
18. Fatigue behavior of additive manufactured 316L stainless steel parts: effects of layer orientation and surface roughness10.1016/j.addma.2019.04.011 ↗
19. Understanding the Rayleigh instability in humping phenomenon during laser powder bed fusion process10.1088/2631-7990/ac93c2 ↗
20. Laser-arc hybrid additive manufacturing of stainless steel with beam oscillation10.1016/j.addma.2020.101180 ↗
21. No more tears for metal 3D printing10.1038/549342a ↗
22. Porous metal implants: processing, properties, and challenges10.1088/2631-7990/acdd35 ↗
23. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties10.1016/j.matdes.2016.12.060 ↗
24. Machinability of SLM-produced Ti6Al4V titanium alloy parts10.1016/j.jmapro.2020.07.035 ↗
25. A hybrid framework to estimate the surface state and fatigue performance of laser powder bed fusion materials after shot peening10.1016/j.apsusc.2021.150758 ↗
26. Synergistic effects in hydrodynamic cavitation abrasive finishing for internal surface-finish enhancement of additive-manufactured components10.1016/j.addma.2020.101110 ↗
27. Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components10.1016/j.jmatprotec.2016.11.014 ↗
28. Effect of process parameters and electropolishing on the surface roughness of interior channels in additively manufactured nickel-titanium shape memory alloy actuators10.1016/j.addma.2019.03.027 ↗
29. Electrochemical mechanical polishing of internal holes created by selective laser melting10.1016/j.jmapro.2021.03.003 ↗
30. Combined electrochemical and mechanical polishing of interior channels in parts made by additive manufacturing10.1016/j.addma.2022.102638 ↗
31. Novel rotating-vibrating magnetic abrasive polishing method for double-layered internal surface finishing10.1016/j.jmatprotec.2018.09.024 ↗
32. Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel10.1016/j.jmapro.2019.07.044 ↗
33. Magnetically driven internal finishing of AISI 316L stainless steel tubes generated by laser powder bed fusion10.1016/j.jmapro.2022.02.009 ↗
34. Surface finishing of additively manufactured Inconel 625 complex internal channels: a case study using a multi-jet hydrodynamic approach10.1016/j.addma.2020.101428 ↗
35. Development and performance evaluation of galactomannan polymer based abrasive medium to finish atomic diffusion additively manufactured pure copper using abrasive flow finishing10.1016/j.addma.2022.103290 ↗
36. Analytical model of dynamic and overlapped footprints in abrasive air jet polishing of optical glass10.1016/j.ijmachtools.2019.03.005 ↗
37. On the predictive modelling of machined surface topography in abrasive air jet polishing of quartz glass10.1016/j.ijmecsci.2018.12.041 ↗
38. Feasibility of using wet abrasive jet machining to produce flat and crack-free micro-textures on reaction bonded silicon carbide10.1016/j.jmatprotec.2021.117423 ↗
39. Fundamentals of atomic and close-to-atomic scale manufacturing: a review10.1088/2631-7990/ac3bb2 ↗
40. The effect of incident angle on the rebound behavior of micro-particle impacts10.1016/j.jaerosci.2021.105778 ↗
41. Analysis and modelling of particle velocities in micro-abrasive air jet10.1016/j.ijmachtools.2009.05.012 ↗
42. Characteristics of multiphase jet machining: a comparison with the absence of water10.1016/j.jmatprotec.2021.117050 ↗
43. Heterogeneous sensing and scientific machine learning for quality assurance in laser powder bed fusion—A single-track study10.1016/j.addma.2020.101659 ↗
44. The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting10.1016/j.jmatprotec.2018.10.015 ↗
45. Thermal augmentation in circular tube with twisted tape and wire coil turbulators10.1016/j.enconman.2008.06.022 ↗
46. Review of heat transfer enhancement methods: focus on passive methods using swirl flow devices10.1016/j.rser.2015.04.113 ↗
47. Novel multiphase jet polishing for complicated structured components produced by laser powder bed fusion10.1016/j.addma.2023.103634 ↗