journal article·2021-02-21Open access

Development of a Panel Membrane Resonant Absorber

Yaw-Shyan Tsay, Jui-Yen Lin, Faxin Ma

Applied Sciences· Volume 11· Issue 4

Abstract

The bass ratio describes the relationship between the reverberation energy in the low frequency region and that of the middle frequency. An appropriate bass ratio can create a warm sound; however, too much bass can influence speech clarity (C50) and work efficiency and can even cause listeners to feel tired or exhausted. Using perforated plate resonance theory and membrane resonance theory, this research developed the panel membrane resonant absorber (PMRA), which not only provides an outstanding continuous absorption spectrum in the broadband range of 100–800 Hz but also presents an aesthetic appearance at a low cost. We divided this study into two parts: (1) PMRA development and experiment and (2) field application and measurement to confirm the sound absorption performance of the PMRA. In part 1, PMRA was developed by combining different materials and thicknesses of the air cavity. In the field study of part 2, the PMRA with the appropriate sound-absorbing curve was installed in a small auditorium, where we conducted field measurements for reverberation time (RT) and speech clarity (C50). According to the experimental results, the PMRA had great absorption performance at a low frequency. In the field validation, the PMRA was found to effectively decrease the low-frequency RT while also maintaining the RT of middle-high frequency. The C50 of the auditorium was also improved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Vehicle Noise and Vibration Control · Noise Effects and Management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Architecture, National Cheng Kung University, Tainan 701, Taiwan

Funding

Ministry of Science and Technology, Taiwan

References (22)

Show source-provided references
1. Knudsen, V.O., and Harris, C.M. (1962). Acoustical Design in Architecture, John Wiley & Sons, Inc.. [6th ed.].
2. Masking Patterns of Tones10.1121/1.1907836 ↗
3. Beranek, L.L. (1962). Music, Acoustics & Architecture, Wiley. [1st ed.].
4. Requirement for Low-Frequency Reverberation in Spaces for Music: Part 1: Smaller Rooms for Different Uses10.1037/pmu0000088 ↗
5. Experimental Study of Annoyance Due to Low Frequency Environmental Noise10.1016/0003-682X(77)90007-X ↗
6. Low Frequency Noise and Annoyance
7. The Effects of Low Frequency Noise on Mental Performance and Annoyance10.1007/s10661-013-3084-8 ↗
8. The Prevalence of Annoyance and Effects after Long-Term Exposure to Low-Frequency Noise10.1006/jsvi.2000.3251 ↗
9. Assessment Criterion for Indoor Noise Disturbance in the Presence of Low Fre-Quency Sources10.1016/j.apacoust.2016.06.001 ↗
10. Falourd, X., Lissek, H., and René, P.J. (2009, January 7). Active Low-Frequency Modal Noise Cancellation for Room Acoustics: An Experimental Study. Proceedings of the16th International Congress on Sound and Vibration (ICSV), Kraków, Poland.
11. Study of the Physiological and Mental Health Effects Caused by Exposure to Low-Frequency Noise in a Simulated Control Room10.1177/1351010X18779518 ↗
12. The Impact of Paintings Hung on Lecture Room Walls on the Speech Intelligibility and Perception of Background Noise
13. Effect of membrane surface tension and backed-air gap distance on sound absorption characteristics
14. Sound Absorption Structures: From Porous Media to Acoustic Metamaterials10.1146/annurev-matsci-070616-124032 ↗
15. A Double Porosity Material for Low Frequency Sound Absorption10.1016/j.compstruct.2020.111978 ↗
16. A Microstructure Material Design for Low Frequency Sound Absorption10.1016/j.apacoust.2018.02.016 ↗
17. A Thin Low-Frequency Broadband Metasurface with Multi-Order Sound Absorption10.1088/1361-6463/aafaa3 ↗
18. Broadband Low-Frequency Sound Absorption by Periodic Metamaterial Resonators Embedded in a Porous Layer10.1016/j.jsv.2019.114922 ↗
19. Hybrid Acoustic Metamaterial as Super Absorber for Broadband Low-Frequency Sound
20. ISO (2003). 354 Acoustics — Measurement of Sound Absorption in a Reverberation Room, ISO.
21. ISO/IEC (2003). 17025 — General Requirements for the Competence of Testing and Calibration Laboratories, ISO.
22. ISO/IEC (2009). 3382-1 — Acoustics — Measurement of Room Acoustic Parameters — Part 1: Performance Spaces, ISO.