Temperature field model in surface grinding: a comparative assessment
Source abstract
Abstract
Abstract Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality. However, a significant technical challenge in grinding is the potential increase in temperature due to high specific energy, which can lead to surface thermal damage. Therefore, ensuring control over the surface integrity of workpieces during grinding becomes a critical concern. This necessitates the development of temperature field models that consider various parameters, such as workpiece materials, grinding wheels, grinding parameters, cooling methods, and media, to guide industrial production. This study thoroughly analyzes and summarizes grinding temperature field models. First, the theory of the grinding temperature field is investigated, classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source, depending on whether the heat source is uniform and continuous. Through this examination, a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived. Subsequently, various grinding thermal models are summarized, including models for the heat source distribution, energy distribution proportional coefficient, and convective heat transfer coefficient. Through comprehensive research, the most widely recognized, utilized, and accurate model for each category is identified. The application of these grinding thermal models is reviewed, shedding light on the governing laws that dictate the influence of the heat source distribution, heat distribution, and convective heat transfer in the grinding arc zone on the grinding temperature field. Finally, considering the current issues in the field of grinding temperature, potential future research directions are proposed. The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Grindability of carbon fiber reinforced polymer using CNT biological lubricant10.1038/s41598-021-02071-y ↗
2. Impact of the drying temperature and grinding technique on biomass grindability10.3390/en13133392 ↗
3. Finite difference simulation and experimental investigation: effects of physical synergetic properties of nanoparticles on temperature distribution and surface integrity of workpiece in nanofluid MQL grinding process10.1007/S00170-017-1237-6 ↗
4. Analytical modelling of temperature in cylindrical grinding to predict grinding burns10.1007/S12541-019-00037-9 ↗
5. Temperatures and wear mechanisms in dressing of vitrified bonded grinding wheels10.1016/J.IJMACHTOOLS.2010.03.002 ↗
6. Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions10.1016/J.IJMACHTOOLS.2016.07.007 ↗
7. Challenges in laser-assisted milling of titanium alloys10.1088/2631-7990/abc26b ↗
8. Investigation for convective heat transfer on grinding work-piece surface subjected to an impinging jet10.1016/J.APPLTHERMALENG.2012.10.011 ↗
9. Temperature measurement and heat flux characterization in grinding using thermography10.1016/J.JMATPROTEC.2007.11.267 ↗
10. Effect of grinding fluid supply on workpiece temperature in continuous generating grinding10.1016/j.jmapro.2020.09.072 ↗
11. Investigations of grinding burn on a nitrided steel10.1016/j.procir.2022.03.086 ↗
12. Study for characterizing grinding burn of 1045 steel based on nonlinear ultrasonic coefficients10.1007/s11665-022-06915-0 ↗
13. Effect of combined air cooling and nano enhanced phase change materials on thermal management of lithium-ion batteries10.1016/j.est.2022.104906 ↗
14. Grinding burn on hardened steel: characterization of onset mechanisms by design of experiments10.1007/S00170-018-3156-6 ↗
15. Analytic solution for maximum temperature during cut in and cut out in surface dry grinding10.1016/J.APM.2015.09.031 ↗
16. Residual stress evolution for tooth double-flank by gear form grinding10.1016/j.jmapro.2022.03.058 ↗
17. Residual stress change in multistage grinding10.1016/j.procir.2020.02.068 ↗
18. Impact of grinding wheel specification on surface integrity and residual stress when grinding Inconel 71810.1177/0954405420961209 ↗
19. On grinding force ratio, specific energy, G-ratio and residual stress in SQCL assisted grinding using aerosol of MWCNT nanofluid10.1080/10910344.2021.1903920 ↗
20. Research on electrical discharge grinding technics and tool’s life of polycrystalline cubic boron nitride cutting tool10.1016/J.PROCIR.2017.12.146 ↗
21. In-process tool condition monitoring in compliant abrasive belt grinding process using support vector machine and genetic algorithm10.1016/J.JMAPRO.2017.11.014 ↗
22. Origin, modeling and suppression of grinding marks in ultra precision grinding of silicon wafers10.1016/J.IJMACHTOOLS.2012.11.006 ↗
23. Temperatures in deep grinding of finite workpieces10.1016/S0890-6955(01)00094-3 ↗
24. Recent advances in machine learning research for nanofluid-based heat transfer in renewable energy system10.1021/acs.energyfuels.2c01006 ↗
25. Wheel life and cutting-edge wear in mirror-grinding using a coarse-grained CBN wheel treated by microdressing10.20965/ijat.2016.p0753 ↗
26. Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms10.1016/J.IJMACHTOOLS.2017.06.002 ↗
27. Experimental and modeling characterization of wear and life expectancy of electroplated CBN grinding wheels10.1016/J.IJMACHTOOLS.2017.04.013 ↗
28. Residual stress of grinding cemented carbide using MoS2 nano-lubricant10.1007/s00170-022-08660-z ↗
29. Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant10.1007/s11465-022-0719-x ↗
30. Tribology of enhanced turning using biolubricants: a comparative assessment10.1016/j.triboint.2022.107766 ↗
31. The temperature field study on the three-dimensional surface moving heat source model in involute gear form grinding10.1007/S00170-019-03752-9 ↗
32. Influence of substrate surface-grinding on surface roughness of zirconia coatings fabricated by room temperature spray processing10.36410/jcpr.2020.21.68 ↗
33. Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids10.1016/J.PRECISIONENG.2017.05.012 ↗
34. Cryogenic minimum quantity lubrication machining: from mechanism to application10.1007/s11465-021-0654-2 ↗
35. Effect of grinding temperatures on the surface integrity of a nickel-based superalloy10.1016/s0924-0136(02)00656-8 ↗
36. On the inverse design of discontinuous abrasive surface to lower friction-induced temperature in grinding: an example of engineered abrasive tools10.1016/J.IJMACHTOOLS.2018.04.006 ↗
37. Vibration coupling effects and machining behavior of ultrasonic vibration plate device for creep-feed grinding of Inconel 718 nickel-based superalloy10.1016/J.CJA.2020.12.039 ↗
38. Review of ultrasonic vibration-assisted machining in advanced materials10.1016/j.ijmachtools.2020.103594 ↗
39. Energy aspects and workpiece surface characteristics in ultrasonic-assisted cylindrical grinding of alumina–zirconia ceramics10.1016/J.IJMACHTOOLS.2014.12.002 ↗
40. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining10.1016/J.IJMACHTOOLS.2010.04.005 ↗
41. Thermophysical properties using ND/water nanofluids: an experimental study, ANFIS-based model and optimization10.1016/j.molliq.2021.115659 ↗
42. Machinability of ultrasonic vibration-assisted micro-grinding in biological bone using nanolubricant10.1007/s11465-022-0717-z ↗
43. Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant10.1016/j.triboint.2022.107461 ↗
44. Mechanical behavior and Semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant10.1007/s11465-022-0720-4 ↗
45. Research on microscale skull grinding temperature field under different cooling conditions10.1016/J.APPLTHERMALENG.2017.07.183 ↗
46. Cryogenic manufacturing processes10.1016/J.CIRP.2016.06.007 ↗
47. Influence of cryogenic cooling on surface grinding of stainless steel 31610.1016/J.CRYOGENICS.2013.11.005 ↗
48. Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: experimental investigations and model -prediction using modern machine learning techniques10.1016/j.powtec.2022.117190 ↗
49. Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication10.1016/j.jmapro.2022.06.003 ↗
50. High-performance dry grinding using a grinding wheel with a defined grain pattern10.1016/J.CIRP.2008.03.093 ↗
51. A new surgical grinding wheel for suppressing grinding heat generation in bone resection10.1016/J.CIRP.2014.03.026 ↗
52. Dry grinding process with workpiece precooling10.1016/J.CIRP.2015.04.098 ↗
53. On the prediction of surface burn and its thickness in grinding processes10.1016/J.CIRP.2021.04.041 ↗
54. Mist cooling in neurosurgical bone grinding10.1016/J.CIRP.2013.03.125 ↗
55. Grinding wheel motion, force, temperature, and material removal in rotational atherectomy of calcified plaque10.1016/J.CIRP.2016.04.012 ↗
56. Drastic reduction of grinding fluid flow in cylindrical plunge grinding by means of contact-type flexible brush-nozzle10.1016/J.CIRP.2016.04.092 ↗
57. Direct observation and analysis of heat generation at the grit-workpiece interaction zone in a continuous generating gear grinding10.1016/J.CIRP.2019.04.002 ↗
58. A functional approach to integrating grinding temperature modeling and Barkhausen noise analysis for prediction of surface integrity in bearing steels10.1016/J.CIRP.2017.04.086 ↗
59. Influence of metalworking fluid additives on the thermal conditions in grinding10.1016/J.CIRP.2016.04.016 ↗
60. Surface integrity in high-speed grinding of Al6061T6 alloy10.1016/j.cirp.2022.03.002 ↗
61. Modelling and simulation of thermal effects in internal traverse grinding of hardened bearing steel10.1016/J.CIRP.2016.04.005 ↗
62. Innovation for forming aluminum alloy thin shells at ultra-low temperature by the dual enhancement effect10.1088/2631-7990/ac6b62 ↗
63. Measurement of grinding temperatures using a foil/workpiece thermocouple10.1016/j.ijmachtools.2012.02.006 ↗
64. A review of the techniques for the mold manufacturing of micro/nanostructures for precision glass molding10.1088/2631-7990/ac1159 ↗
65. An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia10.1016/J.IJMACHTOOLS.2008.06.002 ↗
66. Rapid subsurface damage detection of SiC using inductivity coupled plasma10.1088/2631-7990/abff34 ↗
67. An investigation on surface grinding using graphite as lubricant10.1016/S0890-6955(01)00158-4 ↗
68. On the mechanics of the grinding process, part II—thermal analysis of fine grinding10.1016/J.IJMACHTOOLS.2003.09.008 ↗
69. Geometrical transcription of diamond electroplated tool in ultrasonic vibration assisted grinding of steel10.1016/J.IJMACHTOOLS.2012.06.003 ↗
70. The influence of speed on material removal mechanism in high speed grinding with single grit10.1016/J.IJMACHTOOLS.2014.11.010 ↗
71. Multiple criteria optimisation in coated abrasive grinding of titanium alloy using minimum quantity lubrication10.1016/J.IJMACHTOOLS.2016.12.004 ↗
72. Experimental study on grinding force and grinding temperature of Aermet 100 steel in surface grinding10.1016/J.JMATPROTEC.2014.04.013 ↗
73. Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot10.1016/J.JMATPROTEC.2013.07.002 ↗
74. Experimental studies on grinding forces and force ratio of the unsteady-state grinding technique10.1016/S0924-0136(02)00579-4 ↗
75. Grinding temperature in high speed deep grinding of engineering ceramics10.1504/IJAT.2009.024397 ↗
76. Grinding temperature and power consumption in high speed grinding of Inconel 718 nickel-based superalloy with a vitrified CBN wheel10.1016/j.precisioneng.2017.12.005 ↗
77. Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy10.1088/2631-7990/ac1e05 ↗
78. Enhanced grindability and mechanism in the magnetic traction nanolubricant grinding of Ti-6Al-4V10.1016/j.triboint.2023.108603 ↗
79. Suppression of surface burn in grinding of titanium alloy TC4 using a self-inhaling internal cooling wheel10.1016/s1000-9361(11)60012-5 ↗
80. Experimental investigation of the heat flux distribution in grinding of titanium alloy10.1016/j.proeng.2015.01.458 ↗
81. A new technology on enhancing heat transfer during grinding of titanium alloy10.1108/00368791011034557 ↗
82. Wear mechanism in high-speed superabrasive grinding of titanium alloy and its effect on surface integrity10.1016/j.wear.2020.203475 ↗
83. High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-the-art and perspectives10.1088/2631-7990/ab949b ↗
84. From the microscopic interaction mechanism to the grinding temperature field: an integrated modelling on the grinding process10.1016/J.IJMACHTOOLS.2016.08.004 ↗
85. Numerical analysis of grinding temperature measurement by the foil/workpiece thermocouple method10.1016/J.IJMACHTOOLS.2005.12.009 ↗
86. Grinding temperature within contact arc between wheel and workpiece in high-efficiency grinding of ultrahard cutting tool materials10.1016/S0924-0136(02)00842-7 ↗
87. Thermal aspects in the face grinding of ceramics10.1016/S0924-0136(02)00654-4 ↗
88. Grinding temperature modeling based on a time dependent heat source10.1016/J.PROCIR.2018.09.020 ↗
89. Temperatures in high efficiency deep grinding (HEDG)10.1016/S0007-8506(07)62105-2 ↗
90. Development and application of a wheel based process monitoring system in grinding10.1016/S0007-8506(07)60108-5 ↗
91. Three dimensional finite element simulation of transient heat transfer in high efficiency deep grinding10.1016/S0007-8506(07)60693-3 ↗
92. Analysis of workpiece thermal behaviour in cut-off grinding of high-strength steel bars to control quality and efficiency10.1016/J.CIRP.2019.04.023 ↗
93. Temperatures in grinding of magnetic composites-theoretical and experimental approach10.1016/S0007-8506(07)60580-0 ↗
94. Investigations into lubrication in grinding processes using MWCNTs nanofluids with ultrasonic-assisted dispersion10.1016/J.JCLEPRO.2016.06.038 ↗
95. Improvement of surface grinding process performance of CK45 soft steel by minimum quantity lubrication (MQL) technique using compressed cold air jet from vortex tube10.1016/J.JCLEPRO.2016.04.104 ↗
96. Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication10.1016/J.JCLEPRO.2016.09.212 ↗
97. Investigation of acoustic emission signals under a simulative environment of grinding burn10.1016/J.IJMACHTOOLS.2005.05.017 ↗
98. Comparison of numerically and analytically predicted contact temperatures in shallow and deep dry grinding with infrared measurements10.1016/J.IJMACHTOOLS.2007.10.010 ↗
99. Thermomechanical coupling effect on characteristics of oxide film during ultrasonic vibration-assisted ELID grinding ZTA ceramics10.1016/j.cja.2020.05.039 ↗
100. Thermal modeling and optimization of interrupted grinding10.1016/J.CIRP.2018.04.083 ↗