Towards understanding the brittle–ductile transition in the extreme manufacturing
Source abstract
Abstract
Abstract The brittle–ductile transition (BDT) widely exists in the manufacturing with extremely small deformation scale, thermally assisted machining, and high-speed machining. This paper reviews the BDT in extreme manufacturing. The factors affecting the BDT in extreme manufacturing are analyzed, including the deformation scale and deformation temperature induced brittle-to-ductile transition, and the reverse transition induced by grain size and strain rate. A discussion is arranged to explore the mechanisms of BDT and how to improve the machinability based on the BDT. It is proposed that the mutual transition between brittleness and ductility results from the competition between the occurrence of plastic deformation and the propagation of cracks. The brittleness or ductility of machined material should benefit a specific manufacturing process, which can be regulated by the deformation scale, deformation temperature and machining speed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Deformation mechanism and force modelling of the grinding of YAG single crystals10.1016/j.ijmachtools.2019.05.003 ↗
2. The current understanding on the diamond machining of silicon carbide10.1088/0022-3727/47/24/243001 ↗
3. Brittle-ductile transition in diamond cutting of silicon single crystals10.1081/AMP-100108519 ↗
4. Science and art of ductile grinding of brittle solids10.1016/j.ijmachtools.2020.103675 ↗
5. A review on the current research trends in ductile regime machining10.1007/s00170-012-3949-y ↗
6. Sensitivity analysis of the surface integrity of monocrystalline silicon to grinding speed with same grain depth-of-cut10.1007/s40436-020-00291-5 ↗
7. Study on grinding surface deformation and subsurface damage mechanism of reaction-bonded SiC ceramics10.1177/0954405416682282 ↗
8. Study on high-speed grinding mechanisms for quality and process efficiency10.1007/s00170-013-5297-y ↗
9. Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy10.1016/j.jmapro.2017.04.003 ↗
10. Methods for detection of subsurface damage: a review10.1186/s10033-018-0229-2 ↗
11. Research on single-point diamond fly-grooving of brittle materials10.1007/s00170-014-6245-1 ↗
12. Ultraprecision grinding of silicon wafers using a newly developed diamond wheel10.1016/j.mssp.2017.06.031 ↗
13. Study on surface cracking of alumina scratched by single-point diamonds10.1007/BF00551297 ↗
14. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
15. Phase transformation of single crystal silicon induced by grinding with ultrafine diamond grits10.1016/j.scriptamat.2010.09.038 ↗
16. Deformation characteristics and surface generation modelling of crack-free grinding of GGG single crystals10.1016/j.jmatprotec.2019.116577 ↗
17. Size-dependence of zirconia-based ceramics via deformation twinning10.1016/j.eml.2020.101124 ↗
18. Liu · 2020 · 17
19. Monitoring of brittle-ductile transition during AFM machining using acoustic emission10.4028/www.scientific.net/KEM.326-328.405 ↗
20. Detection of ductile to brittle transition in microindentation and microscratching of single crystal silicon using acoustic emission10.1081/MST-100103180 ↗
21. Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material10.1016/j.ijmachtools.2010.10.006 ↗
22. SPH and FE coupled 3D simulation of monocrystal SiC scratching by single diamond grit10.1016/j.ijrmhm.2016.09.016 ↗
23. Research on the machinability of A-plane sapphire under diamond wire sawing in different sawing directions10.1016/j.ceramint.2019.02.086 ↗
24. Analysis of grit interference mechanisms for the double scratching of monocrystalline silicon carbide by coupling the FEM and SPH10.1016/j.ijmachtools.2017.04.012 ↗
25. Interfacial interactions between diamond disk and granite during vertical spindle grinding10.1016/j.wear.2003.10.005 ↗
26. Quantitative analysis of the loads acting on the abrasive grits in the diamond sawing of granites10.1016/S0924-0136(02)00574-5 ↗
27. Study of polycrystalline Al2O3 machining cracks using discrete element method10.1016/j.ijmachtools.2008.01.010 ↗
28. Discrete element method (DEM) modeling of fracture and damage in the machining process of polycrystalline SiC10.1016/j.jeurceramsoc.2008.07.060 ↗
29. An experimental research on the force and energy during the sapphire sawing using reciprocating electroplated diamond wire saw10.1115/1.4038109 ↗
30. Material removal mechanism of sapphire substrates with four crystal orientations by double-sided planetary grinding10.1016/j.ceramint.2019.11.284 ↗
31. Research on the dynamic mechanical properties of C-plane sapphire under impact loading10.1016/j.ceramint.2018.02.227 ↗
32. Optimizing the geometric parameters of chamfered edge for rough machining Fe–Cr–Ni stainless steel10.1007/s00170-016-9736-4 ↗
33. Analytical model of milling forces based on time-variant sculptured shear surface10.1016/j.ijmecsci.2016.06.018 ↗
34. Optimizing the geometric parameters of cutting edge for finishing machining of Fe–Cr–Ni stainless steel10.1007/s00170-016-8895-7 ↗
35. Anisotropic brittle-ductile transition of monocrystalline sapphire during orthogonal cutting and nanoindentation experiments10.1016/j.npe.2018.09.005 ↗
36. Ductile regime scratching of a rock sample in a laser assisted machining technique10.1115/MSEC2017-2758 ↗
37. Micro-laser-assisted machining: the future of manufacturing ceramics and semiconductors
38. Very high speed cutting of Ti–6Al–4V titanium alloy–change in morphology and mechanism of chip formation10.1016/j.ijmachtools.2012.11.004 ↗
39. Ultra-precision diamond turning of optical silicon—a review10.1007/s00170-017-1529-x ↗
40. Brittle–ductile transition during diamond turning of single crystal silicon carbide10.1016/j.ijmachtools.2012.09.001 ↗
41. Brittle-ductile transition in shape adaptive grinding (SAG) of SiC aspheric optics10.1016/j.ijmachtools.2016.11.006 ↗
42. Research on the critical condition of brittle-ductile transition about micro-milling of KDP crystal and experimental verification10.1007/s12541-015-0046-9 ↗
43. The critical conditions of brittle–ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding10.1016/j.jmatprotec.2004.11.002 ↗
44. An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal10.1016/j.ijmachtools.2016.04.009 ↗
45. Subsurface damages beneath fracture pits of reaction-bonded silicon carbide after ultra-precision grinding10.1016/j.apsusc.2018.04.038 ↗
46. Ductile grinding of Silicon carbide in high speed grinding10.1299/jamdsm.2016jamdsm0020 ↗
47. A review on ductile mode cutting of brittle materials10.1007/s11465-018-0504-z ↗
48. A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers10.1007/s00170-005-0364-7 ↗
49. Thermally enhanced machining of hard-to-machine materials—a review10.1016/j.ijmachtools.2010.04.008 ↗
50. Experimental analysis of the machinability in the thermally assisted milling process of zirconia ceramics10.1016/j.precisioneng.2016.02.010 ↗
51. Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results10.1016/S0890-6955(00)00106-1 ↗
52. Laser-assisted machining of Inconel 718 with an economic analysis10.1016/j.ijmachtools.2005.11.005 ↗
53. Theoretical and experimental determination of tool life in hot machining of austenitic manganese steel10.1016/S0890-6955(00)00077-8 ↗
54. The effect of preheating of work material on chatter during end milling of medium carbon steel performed on a vertical machining center (VMC)10.1115/1.1596557 ↗
55. Laser assisted machining: an overview10.1115/1.2836822 ↗
56. High-power diode laser assisted hard turning of AISI D2 tool steel10.1016/j.ijmachtools.2006.01.005 ↗
57. Experimental evaluation of the laser assisted machining of silicon nitride ceramics10.1115/1.1286556 ↗
58. Effects of laser-assisted grinding on surface integrity of zirconia ceramic10.1016/j.ceramint.2019.09.051 ↗
59. Wear of PVD-coated solid carbide end mills in dry high-speed cutting10.1016/j.jmatprotec.2004.09.066 ↗
60. Analysis of the cutting force components and friction in high speed machining10.1115/1.1863253 ↗
61. A review of research related to Salomon’s hypothesis on cutting speeds and temperatures10.1016/j.ijmachtools.2005.12.001 ↗
62. Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining10.1016/j.ijmachtools.2005.07.024 ↗
63. Investigation of heat partition in high speed turning of high strength alloy steel10.1016/j.ijmachtools.2005.03.008 ↗
64. Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting10.1016/j.ijmachtools.2013.05.007 ↗
65. Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6Al-4V10.1007/s00170-016-8847-2 ↗
66. A contribution to the understanding of chip formation mechanism in high-speed cutting of hardened steel10.1016/j.jmatprotec.2004.07.144 ↗
67. Mechanism study on adiabatic shear fracture induced isolated segment formation during high-speed machining10.1016/j.procir.2018.09.032 ↗
68. Wang · 2016 · 23
69. On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel10.1016/j.ijmecsci.2013.07.004 ↗
70. Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy10.1016/j.cirpj.2016.05.007 ↗
71. Brittle removal mechanism of ductile materials with ultrahigh-speed machining10.1115/1.4030826 ↗
72. Deformation patterns and fracture stress of beta-phase gallium oxide single crystal obtained using compression of micro-pillars10.1007/s10853-018-2978-9 ↗
73. Nanoscratch-induced phase transformation of monocrystalline Si10.1016/j.scriptamat.2010.06.034 ↗
74. A chevron-notched bowtie micro-beam bend test for fracture toughness measurement of brittle materials10.1016/j.scriptamat.2017.01.031 ↗
75. Transmission electron microscopy characterization of the deformation of CdZnTe single crystals induced by nanoscratching10.1016/j.scriptamat.2011.05.008 ↗
76. Nanometric cutting in a scanning electron microscope10.1016/j.precisioneng.2015.01.009 ↗
77. Evolution of material removal modes of sapphire under varied scratching depths10.1016/j.ceramint.2017.05.069 ↗
78. An overview of plasticity of Si crystals governed by dislocation motion10.1016/j.engfracmech.2015.08.001 ↗
79. Ductile-brittle transition in micropillar compression of GaAs at room temperature10.1080/14786435.2010.509286 ↗
80. Micropillar compression of LiF [1 1 1] single crystals: effect of size, ion irradiation and misorientation10.1016/j.ijplas.2012.03.005 ↗
81. Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire10.1016/j.actamat.2011.04.054 ↗
82. Shape memory and superelastic ceramics at small scales10.1126/science.1239745 ↗
83. Sample size induced brittle-to-ductile transition of single-crystal aluminum nitride10.1016/j.actamat.2015.01.043 ↗
84. Discussion of the dependence of the effect of size on the yield stress in hard materials studied by microcompression of MgO10.1080/14786435.2010.505179 ↗
85. The mechanism of ductile chip formation in cutting of brittle materials10.1007/s00170-006-0531-5 ↗
86. A new value for Johnson Cook damage limit criterion in machining with large negative rake angle as basis for understanding of grinding10.1016/j.jmatprotec.2016.03.009 ↗
87. Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting10.1007/s00170-012-4146-8 ↗
88. Twinning, phase transformation and dislocation evolution in single crystal titanium under uniaxial strain conditions: a molecular dynamics study10.1016/j.commatsci.2019.109325 ↗
89. Direct observation of room-temperature dislocation plasticity in diamond10.1016/j.matt.2020.02.011 ↗
90. Ultralarge elastic deformation of nanoscale diamond10.1126/science.aar4165 ↗
91. Size and plasticity effects in zirconia micropillars compression10.1016/j.actamat.2015.10.047 ↗
92. Size-dependent plasticity and activation parameters of lithographically-produced silicon micropillars10.1016/j.matdes.2020.108506 ↗
93. Fracture and deformation in brittle solids: a perspective on the issue of scale10.1557/jmr.2004.19.1.22 ↗
94. Ductile-regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
95. Mechanism of brittle-ductile transition of single silicon wafer using nanoindentation techniques10.4028/www.scientific.net/KEM.375-376.52 ↗
96. Study on ductile mode machining of single-crystal silicon by mechanical machining10.1016/j.ijmachtools.2016.10.006 ↗
97. Analysis of ductile mode and brittle transition of AFM nanomachining of silicon10.1016/j.ijmachtools.2012.05.011 ↗
98. Deformation and removal characteristics in nanoscratching of 6H–SiC with Berkovich indenter10.1016/j.mssp.2014.11.034 ↗
99. Nanoindentation and nanoscratch tests of YAG single crystals: an investigation into mechanical properties, surface formation characteristic, and theoretical model of edge-breaking size10.1016/j.ceramint.2019.10.048 ↗
100. Material removal mechanism and deformation characteristics of AlN ceramics under nanoscratching10.1016/j.ceramint.2019.07.034 ↗