Phase transformation induces plasticity with negligible damage in ceria-stabilized zirconia-based ceramics
Source abstract
Abstract
Ceramics and their composites are in general brittle materials because they are predominantly made up of ionic and covalent bonds that avoid dislocation motion at room temperature. However, a remarkable ductile behavior has been observed on newly developed 11 mol.% ceria-stabilized zirconia (11Ce-TZP) composite containing fine alumina (8vol.% Al2O3) and elongated strontium hexa-aluminate (8vol.% SrAl12O19) grains. The as-synthesized composite also has shown full resistance to Low Temperature Degradation (LTD), relatively high strength and exceptionally high Weibull modulus, allowing its use in a broader range of biomedical applications. In this study, to deepen the understanding of plastic deformation in Ce-TZP based composites that could soon be used for manufacturing dental implants, different mechanical tests were applied on the material, followed by complete microstructural characterization. Distinct from pure Ce-TZP material or other zirconia-based ceramics developed in the past, the material here studied can be permanently strained without affecting the Young modulus, indicating that the ductile response of tested samples cannot be associated to damage occurrence. This ductility is related to the stress-induced tetragonal to monoclinic (t-m) zirconia phase transformation, analogue to Transformation-Induced Plasticity (TRIP) steels, where retained austenite is transformed to martensite. The aim of this study is to corroborate if the observed plasticity can be associated exclusively to the zirconia t-m phase transformation, or also to microcraking induced by the transformation. The t-m transformed-zones produced after bending and biaxial tests were examined by X-ray refraction and SEM/TEM coupled with Raman. The results revealed that the observed elastic-plastic behavior occurs without extensive microcracking, confirming a purely elastic-plastic behavior driven by the phase transformation (absence of damage).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. Review-transformation toughening in ceramics: martensitic transformations in crack-tip stress fields10.1111/j.1151-2916.1980.tb10712.x ↗
2. Transformation toughening in zirconia containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
3. Low-temperature aging of Y-TZP ceramics10.1111/j.1151-2916.1999.tb02055.x ↗
4. Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia10.1016/j.biomaterials.2005.11.021 ↗
5. Low-Temperature degradation of zirconia and implications for biomedical implants10.1146/annurev.matsci.37.052506.084250 ↗
6. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
7. Low-temperature aging of zirconia ferrules for optical connectors10.1111/j.1151-2916.2001.tb01085.x ↗
8. The role of trace additions of alumina to Yttria-tetragonal zirconia polycrystals (Y-TZP)10.1016/S1359-6462(01)01076-4 ↗
9. Transformation toughening I. Size effects associated with the thermodynamics of constrained transformations10.1007/BF00809057 ↗
10. The influence of grain size on low-temperature degradation of dental zirconia10.1002/jbm.b.31969 ↗
11. 3Y-TZP ceramics with improved hydrothermal degradation resistance and fracture toughness10.1016/j.jeurceramsoc.2014.02.026 ↗
12. Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation10.1016/j.actbio.2015.01.037 ↗
13. Low temperature degradation resistant nanostructured yttria-stabilized zirconia for dental applications10.1016/j.ceramint.2016.02.026 ↗
14. Low temperature degradation -aging- of zirconia: a critical review of the relevant aspects in dentistry10.1016/j.dental.2010.04.006 ↗
15. Low-temperature degradation of different zirconia ceramics for dental applications10.1016/j.actbio.2011.11.016 ↗
16. Strength, fracture toughness and vickers hardness of CeO2-stabilized tetragonal ZrO2 polycrystals (Ce-TZP)10.1007/BF01026311 ↗
17. Static and cyclic crack propagation in Ce-TZP ceramics with different amounts of transformation toughening10.1016/j.jeurceramsoc.2006.04.108 ↗
18. Strength limitations of transformation-toughened zirconia alloys10.1111/j.1151-2916.1986.tb04785.x ↗
19. Postsintering hot isostatic pressing of ceria-doped tetragonal zirconia/alumina composites in an argon-oxygen gas atmosphere10.1111/j.1151-2916.1989.tb06213.x ↗
20. Fatigue crack propagation in ceria-partially- stabilized zirconia (Ce-TZP)-alumina composites10.1111/j.1151-2916.1990.tb06706.x ↗
21. Transformation zone shape effects on crack shielding in ceria-partially-stabilized zirconia (Ce-TZP)-alumina composites10.1111/j.1151-2916.1992.tb04376.x ↗
22. Redistribution of Ce and La during processing of Ce(La)-TZP/Al2O3 composites
23. Tough and strong Ce-TZP/alumina nanocomposites doped with titania
24. Slow-crack propagation behavior in Ce-TZP/Al2O3 nanocomposites
25. Synthesis of dense nano- scrystalline ZrO2-MgAl2O4 spinel composite10.1016/j.scriptamat.2005.07.008 ↗
26. Introduction to a tough, strong and stable Ce-TZP/MgAl2O4 composite for biomedical applications10.1016/j.jeurceramsoc.2012.02.002 ↗
27. High-toughness Ce-TZP/ Al2O3 ceramics with improved hardness and strength10.1111/j.1151-2916.1991.tb07315.x ↗
28. Formation of plate-like lanthanum-β-aluminate crystal in Ce-TZP matrix10.1007/BF00356602 ↗
29. Effect of lanbo4 addition on the mechanical properties of ceria-tetragonal zirconia polycrystal matrices10.1016/S0955-2219(98)00104-6 ↗
30. Fabrication of Ce-TZP/b- hexaaluminate composites using amorphous precursor of the second phase10.2109/jcersj2.120.111 ↗
31. In situ formation of Ce- TZP/Ba-Hexaaluminate composites10.2109/jcersj.107.814 ↗
32. A comparison of microstructure and mechanical properties of 12Ce- TZP reinforced with alumina and in situ formed strontium- or lanthanum- hexaaluminate precipitates10.1016/j.jeurceramsoc.2013.08.037 ↗
33. Evaluation of Weibull master curves of zirconia ceramics and zirconia/alumina composites10.1023/A:1018548423928 ↗
34. Towards long lasting zirconia-based composites for dental implants. Part I: innovative synthesis, microstructural characterization and in vitro stability10.1016/j.biomaterials.2015.01.018 ↗
35. Towards long lasting zirconia-based composites for dental implants: transformation induced plasticity and its consequence on ceramic reliability10.1016/j.actbio.2016.11.040 ↗
36. Mechanical property characterization of a 9 mol% Ce-TZP ceramic material -I. Flexural response10.1016/0955-2219(95)00102-6 ↗
37. Crack resistance and fatigue of transforming ceramics: I, materials in the ZrO2-Y2O3-Al2O3 system10.1111/j.1151-2916.1991.tb06882.x ↗
38. Tetragonal-to-monoclinic phase transformation in CeO2 -stabilised zirconia under uniaxial loading10.1016/S0955-2219(00)00258-2 ↗
39. Ceramic steel?10.1038/258703a0 ↗
40. Metastability of the martensitic transformation in a 12 mol% ceria-zirconia alloy: I, deformation and fracture observations10.1111/j.1151-2916.1989.tb05959.x ↗
41. Fracture behavior of Ce-TZP/alumina/aluminate composites with different amounts of transformation toughening. Influence of the testing methods10.1016/j.jeurceramsoc.2017.09.052 ↗
42. Fatigue deformation mechanisms of zirconia ceramics10.1111/j.1151-2916.1992.tb05558.x ↗
43. Stress-biased anisotropic microcracking in zirconia polycrystals10.1111/j.1151-2916.1990.tb05152.x ↗
44. Implications of transformation plasticity in ZrO2-containing ceramics: I, shear and dilatation effects10.1111/j.1151-2916.1986.tb07403.x ↗
45. Cyclic fatigue of Ce-TZP/Al2O3 composites: role of the degradation of transformation zone shielding10.1111/j.1151-2916.1995.tb08221.x ↗
46. Crack shielding in Ce-TZP/Al2O3 composites: comparison of fatigue and sustained load crack growth specimen10.1111/j.1151-2916.1994.tb06963.x ↗
47. Shape memory-like effect in a Ce-TZP/Al2O3 composite10.1111/j.1151-2916.1992.tb07235.x ↗
48. HRTEM observation of bonding interface between Ce-TZP/Al2O3 nanocomposite and porcelain10.4012/dmj.2014-035 ↗
49. Transmission electron microscopy of zirconia ceramics10.1111/j.1365-2818.1985.tb02673.x ↗
50. Metastability of the martensitic transformation in a 12 mol% ceria-zirconia alloy: II, grinding studies10.1111/j.1151-2916.1989.tb07652.x ↗
51. Low-temperature degradation in yttria-stabilized tetragonal zirconia polycrystal doped with small amounts of alumina: effect of grain-boundary energy10.1016/j.jeurceramsoc.2015.09.016 ↗
52. Nanocrystalline, ultra-degradation-resistant zirconia: its grain boundary nanostructure and nanochemistry10.1038/srep04758 ↗
53. Microstructure characterisation of ceramics via 2D and 3D X-ray refraction techniques10.1016/j.jeurceramsoc.2016.12.031 ↗
54. Microstructural characterization of porous materials by two-dimensional X-ray refraction topography10.1016/j.colsurfa.2004.04.074 ↗
55. Application of X-ray refraction topography to fibre reinforced plastics10.1016/S1359-835X(00)00057-9 ↗
56. Evolution of porosity, crack density, and CMAS penetration in thermal barrier coatings subjected to burner rig testing10.1111/jace.16465 ↗
57. Evolution of thermal microcracking in refractory ZrO2-SiO2 after application of external loads at high temperatures10.3390/ma12071017 ↗
58. Stress-induced microcrack density evolution in β-eucryptite ceramics: experimental observations and possible route to strain hardening10.1016/j.actamat.2017.10.030 ↗
59. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction10.1111/j.1151-2916.1984.tb19614.x ↗
60. R: A language and Environment For Statistical Computing, R Foundation for Statistical Computin., Vienna, Austria, 2013.
61. Fityk: a general-purpose peak fitting program10.1107/S0021889810030499 ↗
62. Quantitative analysis of monoclinic phase in 3Y-TZP by Raman spectroscopy10.1111/j.1551-2916.2010.03635.x ↗
63. Direct determination by a Raman microprobe of the transformation zone size in Y2O3 containingtetragonal ZrO2 polycrystals
64. Fourty years after the promise of « ceramic steel? »: zirconia-based composites with a metal-like mechanical behavior
65. Inelastic deformation of mg-psz and its significance for strength-toughness relationship of zirconia toughened ceramics10.1016/0001-6160(85)90131-2 ↗
66. R-curve behaviour of 2Y-TZP with submicron grain size10.1016/j.jeurceramsoc.2005.11.012 ↗
67. Plasticity-induced fatigue damage in ceria-stabilized tetragonal zirconia polycrystlas10.1111/j.1151-2916.1994.tb07093.x ↗
68. Deformation bands in ceria-stabilized zirconia/alumina: I, measurement of internal stresses10.1111/j.1151-2916.1995.tb08224.x ↗
69. Ultrasonic evaluation of stiffness tensor changes and associated anisotropic damage in a ceramic matrix composite10.1115/1.2901446 ↗
70. A study of the differential scheme for composite materials10.1016/0020-7225(77)90058-1 ↗
71. Mechanics of bodies with many cracks
72. On modeling of microstresses and microcracking generated by cooling of polycrystalline porous ceramics10.1016/j.jeurceramsoc.2013.02.023 ↗
73. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment10.4012/dmj.27.408 ↗
74. Impact of the non-linear character of the compressive stress–strain curves on thermal and mechanical properties of porous microcracked ceramics10.1016/j.jeurceramsoc.2012.09.004 ↗
75. Young's modulus and Poisson's ratio changes due to machining in porous microcracked cordierite10.1007/s10853-016-0209-9 ↗
76. The effect of porosity and microcracking on the thermomechanical properties of cordierite10.1016/j.jeurceramsoc.2015.08.014 ↗
77. Micromechanical modeling of non-linear stress-strain behavior of polycrystalline microcracked materials under tension10.1016/j.actamat.2018.10.024 ↗
78. Preparation and thermo-mechanical characterization of titanate flexible ceramics10.1007/s10853-010-4897-2 ↗
79. Tetragonal-to-monoclinic phase transformation in CeO2 -stabilized zirconia under multiaxial loading10.1016/S0955-2219(01)00384-3 ↗
80. Grain-Size-Dependent transformation behavior in polycrystalline tetragonal zirconia10.1111/j.1151-2916.1992.tb07832.x ↗
81. Crack resistance and fatigue of transforming ceramics: II, CeO2-stabilized tetragonal ZrO210.1111/j.1151-2916.1991.tb04297.x ↗
82. Small-angle X-ray refraction in metal wires, glass-fibers and hard elastic propylenes10.1107/S0108767387099100 ↗
83. Evidence of damage evolution during creep of Al–Mg alloy using synchrotron X-ray refraction10.1107/S1600576718001449 ↗
84. Shape memory behaviour in partially stabilized zirconia ceramics10.1038/322234a0 ↗
85. Transformation plasticity of CeO2-stabilized tetragonal zirconia polycristals: II. Pseudoplasticity and shape memory effect10.1111/j.1151-2916.1988.tb06383.x ↗
86. Shape memory and superplastic ceramics at small scales10.1126/science.1239745 ↗