Analysis of the Influence of a Powertrain Mounting System on a Dual-Clutch Transmission Vehicle under Typical Working Conditions
Source abstract
Abstract
The unsuitably designed powertrain mount may cause jittering and shrugging during the starting and shifting processes of the vehicle, which seriously affects the comfort of using the vehicle. However, the influence of mounts on vehicles has been neglected in previous studies. In view of the above problems, this study establishes a DCT vehicle coupling dynamic model, considering six degrees of freedom of the powertrain mount and the engine dynamic torque, nonlinear characteristics of a dual-mass flywheel, time-varying stiffness of gear systems, and other factors. Furthermore, the effect of mounts on the longitudinal dynamic characteristics of the vehicle is studied during the starting, shifting, and tip-in/tip-out process. The results show that under typical working conditions, the mount and its stiffness and damping affect the fluctuation frequency and amplitude of the jerk. When the torque of the vehicle transmission system changes greatly, such as under starting and tip-in/tip-out conditions, the mount has a great impact on the dynamic performance of the vehicle. Simultaneously, the engine torque fluctuation can act on the vehicle through the mount, which has an impact on the jerk of the vehicle. A comparison with vehicle test results reveals that the DCT coupling dynamic model can reflect the law of the effect of the mount on the vehicle performance and verify the rationality of the model. Under typical working conditions, when the influence of the mount is not considered in the vehicle dynamic’s modeling, there is a large error of the jerk between the simulation results and the actual situation. The results provide a reference for optimizing the parameters of the mount and improving the dynamic characteristics of DCT vehicles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400044, China
Funding
National Natural Science Foundation of China
References (30)
Show source-provided references
1. Linearisation modelling and active performance simulation of active engine mounts with an oscillating coil actuator for automotive powertrain10.1504/IJVD.2021.120415 ↗
2. Modelling of dual clutch transmission equipped powertrains for shift transient simulations10.1016/j.mechmachtheory.2012.09.007 ↗
3. Numerical investigations into shift transients of a dual clutch transmission equipped powertrains with multiple nonlinearities10.1177/1077546313499179 ↗
4. Research on Damping Performance of Dual Mass Flywheel Based on Vehicle Transmission System Modeling and Multi-Condition Simulation10.1109/ACCESS.2019.2951618 ↗
5. Bai, J., Wu, X., Gao, F., and Li, H. (2017). Analysis of Powertrain Loading Dynamic Characteristics and the Effects on Fatigue Damage. Appl. Sci., 7.10.3390/app7101027 ↗
6. Dynamic and kinematic model of a dual clutch transmission10.1016/j.mechmachtheory.2011.01.013 ↗
7. Modeling and Control Approach for Dual Clutch Transmission Vehicles Starting Process Based on State-Dependent Autoregressive with Exogenous Model10.1109/ACCESS.2020.3014162 ↗
8. Offline model predictive control approach to micro-slip control in gearshifts of dual clutch transmission
9. Analysis and optimization of clutch judder based on a hybrid uncertain model with random and interval variables10.1080/0305215X.2018.1426758 ↗
10. Modeling and analysis of friction clutch at a driveline for suppressing car starting judder10.1016/j.jsv.2018.03.011 ↗
11. Effect of the performance of the driven disc of the friction clutch on vehicle judder during starting
12. Ding, Z., Chen, L., Chen, J., Cheng, X., and Yin, C. (2021). Scheduling Period Selection Based on Stability Analysis for Engagement Control Task of Automatic Clutches. Appl. Sci., 11.10.3390/app11188636 ↗
13. Study on the Influence Factors Upon the Propensity to Stick-Slip Phenomenon During Vehicle Start-Up Process10.1109/ACCESS.2020.2966001 ↗
14. Modular modeling and dynamic response analysis of a driveline system during start-up process10.1016/j.mechmachtheory.2020.104136 ↗
15. Control-oriented modeling and torque estimations for vehicle driveline with dual-clutch transmission10.1016/j.mechmachtheory.2017.11.008 ↗
16. Hong, D., and Kim, B. (2019). Quantification of Active Structural Path for Vibration Reduction Control of Plate Structure under Sinusoidal Excitation. Appl. Sci., 9.10.3390/app9040711 ↗
17. A Theoretical Investigation of the Influence of Powertrain Mounts on Transmission Torsional Dynamics10.4271/2017-01-1124 ↗
18. Application of fuzzy dynamic weights drivability evaluation model in tip-in condition10.1177/1077546318795527 ↗
19. Impulsive response of an automatic transmission system with multiple clearances: Formulation, simulation and experiment10.1016/j.jsv.2007.05.053 ↗
20. Research on dynamic behavior of torsional absorber in powertrain system considering nonlinear factors10.1177/1077546320947338 ↗
21. Investigation on friction-induced judder of vehicle driveline based on a nonlinear friction model
22. Li, R., and Wang, J. (1997). Gear System Dynamics, Science Press.
23. Shen, J., Hu, N., Zhang, L., and Luo, P. (2020). Dynamic Analysis of Planetary Gear with Root Crack in Sun Gear Based on Improved Time-Varying Mesh Stiffness. Appl. Sci., 10.10.3390/app10238379 ↗
24. Effects of Wear, Backlash, and Bearing Clearance on Dynamic Characteristics of a Spur Gear System10.1109/ACCESS.2019.2936496 ↗
25. Yi, Y. (2018). Electromechanical Coupling Dynamics of Cutting Transmission System of Coal-Mining Machine Operating in Variable Speed/Variable Load Conditions, Chongqing University.
26. Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system10.1016/0022-460X(91)90527-Q ↗
27. Design of a hybrid proportional electromagnetic dynamic vibration absorber for control of idling engine vibration10.1177/0954407019845720 ↗
28. The improvement on vibration isolation performance of hydraulic excavators based on the optimization of powertrain mounting system10.1177/1687814019849988 ↗
29. Guo, R., and Zhang, T. (2013). Vehicle Powertrain Mounting System, Shanghai Tongji University Press.
30. Identification and Robustness Analysis of Powertrain Excitation Forces