journal article·2022-05-18Open access

Performance of Steel-Bolt-Connected Industrialized Building System Frame Subjected to Hydrodynamic Force

Abubakar Sharif Auwalu, Norhazilan Md Noor, Mohamad Shazwan Ahmad Shah, Sarehati Umar, Mugahed Amran, Musa Adamu, Nikolai Ivanovich Vatin, Roman Fediuk

Applied Sciences· Volume 12· Issue 10

Abstract

People need durable shelters for living safely due to devastation caused by flooding in some areas, and it is not easy to mitigate the frequency and intensity of the flooding. Therefore, in this research, an industrialized building system (IBS) has been proposed as one of the best solutions. However, most of the existing IBSs were not designed and tested for resisting a sudden horizontal impact. Furthermore, the joints of some IBSs would likely be vulnerable to failure when subjected to a horizontal impact. There is a need to develop a bolt-connected IBS that is able to withstand a horizontal impact load. Thus, this study aimed to investigate the performance of steel-bolt-connected IBS frames subjected to the sudden impact of hydrodynamic force. Autodesk computational fluid dynamic (CFD) simulation was used for optimizing the laboratory experiment. A 1:5-scale IBS frame was designed and tested for the dam-break test using 1 m, 2 m, and 3 m reservoir water levels. The results showed that the bolt connections were very effective and robust in the IBS frame. They also restricted damages from spreading to other structural components due to energy dissipation. The main findings of this study are crucial to improving the current IBS method of construction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Earthquake and Tsunami Effects · Tropical and Extratropical Cyclones Research · Coastal and Marine Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81310, Johor, Malaysia

Construction Research Centre, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81310, Johor, Malaysia

Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Alkharj 16273, Saudi Arabia

Department of Civil Engineering, Faculty of Engineering and IT, Amran University, Amran 9677, Yemen

Engineering management Department, College of Engineering, Prince Sultan University, Riyadh 11586, Saudi Arabia

Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russia

Polytechnic Institute, Far Eastern Federal University, 690922 Vladivostok, Russia

Funding

the Ministry of Science and Higher Education of the Russian Federation

References (56)

Show source-provided references
1. Exploring the managing of flood disaster: A Malaysian perspective10.17576/geo-2018-1403-03 ↗
2. Flash flood-induced vulnerability and need assessment of wetlands using remote sensing, GIS, and econometric models
3. Recent retreat and flood dominant areas along the muddy Mahin coastline of Ilaje, Nigeria
4. Menne, B., and Murray, V. (2013). Floods in the WHO European Region: Health Effects and Their Prevention, WHO Regional Office for Europe.
5. A short-term flood prediction based on spatial deep learning network: A case study for Xi County, China10.1016/j.jhydrol.2022.127535 ↗
6. An investigation on the non-stationarity of flood frequency across the UK10.1016/j.jhydrol.2021.126309 ↗
7. Investigating major causes of extreme floods using global datasets: A case of Nepal, USA & Thailand10.1016/j.pdisas.2021.100212 ↗
8. A comparison of social vulnerability indices specific to flooding in Ecuador: Principal component analysis (PCA) and expert knowledge10.1016/j.ijdrr.2022.102897 ↗
9. DID (2000). Urban Storm Water Management Manual for Malaysia, Stormwater Management Division Drainage and Irrigation Department of Malaysia.
10. Examining flood vulnerability mapping approaches in developing countries: A scoping review10.1016/j.ijdrr.2021.102766 ↗
11. Urban flood vulnerability and risk mapping using integrated multi-parametric AHP and GIS: Methodological overview and case study assessment10.3390/w6061515 ↗
12. Issues and challenges in flood risk management-Editorial for the special issue on flood risk management10.3390/w4040785 ↗
13. A systematic review of the flood vulnerability using geographic information system10.1016/j.heliyon.2022.e09075 ↗
14. Flood susceptibility assessment in Hengfeng area coupling adaptive neuro-fuzzy inference system with genetic algorithm and differential evolution10.1016/j.scitotenv.2017.10.114 ↗
15. Bin Flood susceptibility modelling using novel hybrid approach of reduced-error pruning trees with bagging and random subspace ensembles10.1016/j.jhydrol.2019.05.089 ↗
16. Murali, G., Abid, S.R., Amran, M., Fediuk, R., Vatin, N., and Karelina, M. (2021). Combined Effect of Multi-Walled Carbon Nanotubes, Steel Fibre and Glass Fibre Mesh on Novel Two-Stage Expanded Clay Aggregate Concrete against Impact Loading. Crystals, 11.10.3390/cryst11070720 ↗
17. Flexural strength of special reinforced lightweight concrete beam for Industrialised Building System (IBS)
18. Al-Nini, A., Nikbakht, E., Syamsir, A., Shafiq, N., Mohammed, B.S., Al-Fakih, A., Al-Nini, W., and Amran, Y.H.M. (2020). Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets. Materials, 13.10.3390/ma13143064 ↗
19. Mohan, M., Ramachandran, A., Amran, M., and Borovkov, A. (2022). Determination of Buckling Behavior of Web-Stiffened Cold-Formed Steel Built-Up Column under Axial Compression. Mater. Des., 15.10.3390/ma15092968 ↗
20. Avudaiappan, S., Saavedra Flores, E.I., Araya-Letelier, G., Thomas, W.J., Raman, S.N., Murali, G., Amran, M., Karelina, M., Fediuk, R., and Vatin, N. (2021). Experimental investigation on composite deck slab made of cold-formed profiled steel sheeting. Metals, 11.10.3390/met11020229 ↗
21. Challenges in the Management of IBS Construction Projects10.21834/ajqol.v3i9.75 ↗
22. Baharuddin, A., Rahman, A., and Omar, W. (2006, January 5–6). Issues and Challenges in the Implemetation of Industrialised Building Systems in Malaysia. Proceedings of the 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), Kuala Lumpur, Malaysia.
23. Chidambaram, R.S. (2018). Pre-Cast Concrete Connections, Issues and Innovative Solutions What Is Pre-cast Structure Different Type of Connections in Pre-Cast Structure Foundation to Column Column to Column Column to Beam (Interior, Exterior, Corner) Beam to Slab, Academy of Scientific and Innovative Research.
24. Zhang, C., Ding, K., and He, S. (2022). Seismic Performance of Panel Connectors with Steel Frame Based on Autoclaved Lightweight Concrete (ALC). Buildings, 12.10.3390/buildings12030372 ↗
25. Al-sabah, S., Laefer, D.F., Hong, L.T., Huynh, M.P., Shemshadian, M.E., and Dizon, R. (2020). Introduction of the Intermeshed Steel Connection—A New Universal Steel Connection. Buildings, 10.10.3390/buildings10030037 ↗
26. Cho, B., Lee, J., Kim, H., and Kim, D. (2019). Structural Performance of a New Blind-Bolted Frame Modular Beam-Column Connection under Lateral Loading. Appl. Sci., 9.10.3390/app9091929 ↗
27. Ma, W., Li, Y., Ding, K., Cheng, B., Liu, J., and Hao, J. (2019). Mechanical Properties of New Dry-Type Beam-Column Bolt Connection Joint. Sustainability, 11.10.3390/su11123348 ↗
28. Influence of the vertical grouting in the interface between corbel and beam in beam-to-column connections of precast concrete structures—An experimental analysis10.1016/j.engstruct.2018.05.113 ↗
29. Strengthening of precast RC beam-column connections for progressive collapse mitigation using bolted steel plates10.1016/j.engstruct.2018.02.009 ↗
30. Mokhtar, R. (2017). Behaviour of Precast Beam-To-Column Connections By Using Partly Hidden Corbel, University of Malaya.
31. Experimental and Numerical Validation of Flexural Behaviour of Multi-Scale Prefabricated Industrialised Building System (Ibs) Sub-Frame
32. Silvester, T.B., and Cleary, P.W. (2006, January 13–15). Wave Structure Interaction Using Smoothed Particle Hydrodynamics. Proceedings of the Fifth International Conference on CFD in the Process IndustriesCSIRO, Melbourne, Australia.
33. Tsunami bore forces on a compliant residential building model10.1016/j.engstruct.2009.05.017 ↗
34. Smoothed-Particle Hydrodynamics Numerical Modeling of Structures Impacted by Tsunami Bores10.1061/(ASCE)WW.1943-5460.0000225 ↗
35. Structural seismic performance of reinforced concrete block system for two storeys safe house
36. Experimental Investigation of Tsunami Waterborne Debris Impact on Structures
37. Seismic Performance of Scaled Ibs Block Column For Static Nonlinear Monotonic Pushover Experimental Analysis
38. Flexural Strength Test of Precast Industrialised Building System Beam-Corbel Connection
39. Experimental simulation of tsunami surge and its interaction with coastal structure10.1177/2041419619874082 ↗
40. Physical modelling of hydraulics10.1016/B978-075065978-9/50021-0 ↗
41. Durst, F. (2008). Fluid Mechanics: An Introduction to the Theory of Fluid Flows, Springer.
42. On Physically Similar Systems: Illustrations of the Use of Dimensional Equations10.1103/PhysRev.4.345 ↗
43. (2005). Standard Specification for Portland Cement (Standard No. ASTM C150-05).
44. (1991). Specification for Portland Cement (Standard No. BS12:1991).
45. Behavior of cold-formed ferrocement composite column under axial loading
46. (2003). Materials, A.S. for T. and Standard and Specifications for Concrete Aggregates (Standard No. ASTM C33-03).
47. (2002). Standard Specification for Standard Sand (Standard No. C778-02).
48. (1996). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens (Standard No. ASTM C496-96).
49. (2011). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (Standard No. ASTMC39/C39-11a).
50. Harris, H.G., and Sabnis, G. (1999). Structural Modling and Expeimental Techniques, CRC Press. [2nd ed.].10.1201/9780367802295 ↗
51. (1982). ACI Committee 444 Models of Concrete Structures, American Concrete Institute.
52. Negro, P., Editors, G.T., and Toniolo, G. (2012). Design Guidelines for Connections of Precast Structures under Seismic Actions, European Commission.
53. Computational Fluid Dynamic (CFD) simulation of flow around tall buildings
54. FEMA (2012). Guidelines for Design of Structures for Vertical Evacuation from Tsunamis, FEMA. [2nd ed.]. (FEMA P-646).
55. FEMA (2011). Coastal Construction Manual: FEMA P-55, FEMA.
56. Aghl, P.P. (2014). Determination of Demands Resulting from High Mass, Low Velocity Debris Impact on Structures, Lehigh University Libraray.