Mechanical Characteristics of Hybrid-Fiber-Reinforced Concrete Shaft Wall Structure Under Uneven Load
Source abstract
Abstract
Abstract To prevent damage to shaft walls in mines due to uneven loading, the mechanical properties of a shaft wall structure made of hybrid-fiber-reinforced concrete were studied. First, through orthogonal testing, the optimal mix proportion of the hybrid-fiber-reinforced concrete was obtained. Subsequently, a numerical calculation model of the shaft wall structure under uneven loading was established. The calculation results showed that the structure exhibits a tensile stress under the action of uneven loading and that its bearing capacity can be improved using the hybrid-fiber-reinforced concrete. Based on the numerical simulation results, a calculation formula for the bearing capacity of the shaft wall was obtained by regression. Finally, a model test was conducted on the shaft lining structure. The results obtained were consistent with those obtained using the numerical simulation regression formula, confirming the reliability of the numerical simulation results. This study showed that a hybrid-fiber-reinforced concrete shaft wall structure can better withstand uneven loads and has improved brittle failure characteristics. Hybrid-fiber-reinforced concrete is an excellent material for deep shaft wall structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Cheng, H., Zhang, L. L., Yao, Z. S., Peng, S. L., & Guo, L. H. (2021). Mechanism of shaft deflection in asymmetric mining of thick unconsolidated layer and thin bedrock. China Coal Soc., 46(01), 1283–1305. https://doi.org/10.13225/j.cnki.jccs.2021.151010.13225/j.cnki.jccs.2021.1510 ↗
2. China Coal Construction Association. (2016). GB50384-2007, Code for design of coal mine shaft and chamber. Beijing: China Planning Press.
3. Cui, Y. L. (2003). A concise handbook of mine construction engineering. Beijing: China Coal Industry Press.
4. Fang, Y., Yao, Z. S., Huang, X. W., Li, X. W., Diao, N. H., Hu, K., & Li, H. (2022). Permeability evolution characteristics and microanalysis of reactive powder concrete of drilling shaft lining under stress-seepage coupling. Constr Build Mater, 331, 127296. https://doi.org/10.1016/j.conbuildmat.2022.12733610.1016/j.conbuildmat.2022.127336 ↗
5. Gao, Y. L., He, Q. Y., Li, C. P., Wang, M., Han, X. L., Ma, B., et al. (2021). Analysis of shaft failure mechanism in the 1240–1120 m section of Xi’er auxiliary shaft in Longshou mine of Jinchuan deposit. Sci Technol Eng, 21(23), 64–67.
6. Guler, S., & Yavuz, D. (2019). Post-cracking behavior of hybrid fiber-reinforced concrete-filled steel tube beams. Constr Build Mater, 205, 285–305. https://doi.org/10.1016/j.conbuildmat.2019.01.19210.1016/j.conbuildmat.2019.01.192 ↗
7. Guler, S., Yavuz, D., & Aydın, M. (2019a). Hybrid fiber reinforced concrete-filled square stub columns under axial compression. Eng Struct, 198, 109504. https://doi.org/10.1016/j.engstruct.2019.10950410.1016/j.engstruct.2019.109504 ↗
8. Guler, S., Yavuz, D., Korkut, F., & Ashour, A. (2019b). Strength prediction models for steel, synthetic, and hybrid fiber reinforced concretes. Struct Concr, 20(1), 428–445. https://doi.org/10.1002/suco.20180008810.1002/suco.201800088 ↗
9. Han, T., Yang, W. H., Ren, Y. L., & Yang, Z. J. (2012). Numerical and experimental model studies of the horizontal bearing properties of shaft linings of encased steel or steel fiber reinforced, high strength concrete. J China Univ Min Tech, 41(02), 205–211.
10. He, M. C. (2021). Research progress of deep shaft construction mechanics. China Coal Soc, 44(05), 1283–1305. https://doi.org/10.13225/j.cnki.jccs.YT21.012410.13225/j.cnki.jccs.YT21.0124 ↗
11. Hsie, M., Tu, C. J., & Song, P. S. (2008). Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Mater Sci Eng A, 494, 153–157. https://doi.org/10.1016/j.msea.2008.05.03710.1016/j.msea.2008.05.037 ↗
12. Jiang, G. J., Wang, J. P., & Liu, X. M. (2013). Study on frozen pressure measurement of ultra thick clay stratum. Coal Sci Tech, 41(03), 43–46. https://doi.org/10.13199/j.cst.2013.03.49.jianggj.01710.13199/j.cst.2013.03.49.jianggj.017 ↗
13. Kong, W. H., Yang, L., Yao, Z. S., Xue, W. P., & Gao, C. (2020). Preparation and crack resistance test of high performance concrete with fiber hybrid and micro expansion freezing shaft wall. Saf Coal Mines, 35(03), 45–48. https://doi.org/10.13347/j.cnki.mkaq.2020.03.01410.13347/j.cnki.mkaq.2020.03.014 ↗
14. Liang, N. H., Ren, L. X., Tian, S., Liu, X. R., Zhong, Z. L., Deng, Z. Y., & Yan, R. (2021). Study on the fracture toughness of polypropylene-basalt fiber-reinforced concrete. Int J Concr Struct Mater. https://doi.org/10.1186/s40069-021-00472-x10.1186/s40069-021-00472-x ↗
15. Liu, Z. Q., Song, C. Y., Ji, H. G., Liu, S. J., Tan, J., Cheng, S. Y., & Ning, F. B. (2021). Construction mode and key technology of mining shaft engineering for deep mineral resources. China Coal Soc, 46(03), 1283–1305. https://doi.org/10.13225/j.cnki.jccs.yt20.194410.13225/j.cnki.jccs.yt20.1944 ↗
16. Naser, M. Z., & Hawileh, R. A. (2018). Predicting the response of continuous RC deep beams under varying levels of differential settlement. Front Struct Civil Eng, 13, 686–700. https://doi.org/10.1007/s11709-018-0506-210.1007/s11709-018-0506-2 ↗
17. Peng, F. (2022). Research on bearing capacity of C80–C90 high strength reinforced concrete shaft lining structure. China Coal Res Inst. https://doi.org/10.1007/s11709-018-0506-210.1007/s11709-018-0506-2 ↗
18. Qin, B. D., Liu, X. L., & Liu, S. F. (2017). Experimental study on ultimate strength and failure characteristics of hybrid fiber high strength concrete shaft wall. Railw Eng, 2017(01), 156–159.
19. Shi, F., Pham, T. M., Hao, H., & Hao, Y. F. (2020). Post-cracking behaviour of basalt and macro polypropylene hybrid fibre reinforced concrete with different compressive strengths. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.12010810.1016/j.conbuildmat.2020.120108 ↗
20. Shu, E., Song, H. Q., Cai, H. B., & Hong, R. B. (2021). Analysis on heterogeneity of freezing pressure in deep mine shafts of coal mine. Mine Constr Tech, 42(4), 45–51. https://doi.org/10.19458/j.cnki.cn11-2456/td.2021.04.00910.19458/j.cnki.cn11-2456/td.2021.04.009 ↗
21. Sun, S. Y., & Yao, Z. S. (2017). Design and application of mixture ratio of high strength and high performance concrete for frozen shaft wall. Mine Constr Technol, 38(01), 1–4. https://doi.org/10.19458/j.cnki.cn11-2456/td.2017.01.00110.19458/j.cnki.cn11-2456/td.2017.01.001 ↗
22. Wang, J. Z., & Qi, S. Z. (2005). Application of high strength concrete in deep soil shaft wall. Mine Constr Technol, 2005(06), 32–35. https://doi.org/10.19458/j.cnki.cn11-2456/td.2005.06.01010.19458/j.cnki.cn11-2456/td.2005.06.010 ↗
23. Yang, J. J. (2005). Similitude theory and structural model test. Wuhan: Wuhan University of Technology Press.
24. Yang, H. R., & Li, M. J. (2016). Fracture mechanism analysis and treatment measures of outer shaft wall during construction period by freezing method. Coal Technol, 35(3), 68–70. https://doi.org/10.13301/j.cnki.ct.2016.03.02710.13301/j.cnki.ct.2016.03.027 ↗
25. Yang, L., Yao, Z. S., Xue, W. P., Wang, X. S., Kong, W. H., & Wu, T. L. (2019). Preparation, performance test and microanalysis of hybrid fibers and micro expansive high-performance shaft wall concrete. Constr Build Mater, 223(2019), 431–440. https://doi.org/10.1016/j.conbuildmat.2019.06.23010.1016/j.conbuildmat.2019.06.230 ↗
26. Yao, Z. S., & Sun, W. R. (1995). Experimental study on concrete lining structure of frozen shaft under uneven lateral pressure. J Fuxin Min, 1995(03), 30–33.
27. Yao, Z. S., Cheng, H., & Rong, C. H. (2007). Research on stress and strength of high strength reinforced concrete drilling shaft wall in thick top soils. J China Univ Min Technol, 2007(03), 432–435. https://doi.org/10.1016/S1006-1266(07)60120-510.1016/S1006-1266(07)60120-5 ↗
28. Yao, Z. S., Song, H. Q., & Cheng, H. (2009). Development of high performance concrete for frozen shaft wall and experimental study on its main mechanical properties. Coal Eng, 2009(12), 36–39.
29. Yao, Z. S., Cheng, H., Ju, X. B., & Jiang, K. Y. (2015). Measurement and analysis of freezing pressure in deep clay stratum. Mine Constr Technol, 36(04), 30–33. https://doi.org/10.19458/j.cnki.cn11-2456/td.2015.04.01410.19458/j.cnki.cn11-2456/td.2015.04.014 ↗
30. Yao, Y. F., Cheng, H., Li, M. J., Rong, C. X., & Song, J. (2016). Fuzzy random finite element reliability and sensitivity analysis of reinforced concrete outer shaft lining structure in deep alluvium. J China Coal Soc, 41(12), 3032–3039. https://doi.org/10.13225/j.cnki.jccs.2016.054710.13225/j.cnki.jccs.2016.0547 ↗
31. Yao, Z. S., Cheng, H., & Ju, X. B. (2017). Research and application of high strength steel-fiber concrete compound shaft wall with inner steel plate in deep alluvium shaft repair. China Coal Soc, 276, 2295–2301. https://doi.org/10.13225/j.cnki.jccs.2016.179010.13225/j.cnki.jccs.2016.1790 ↗
32. Yao, Z. S., Li, X., Wu, T. L., Yang, L., & Liu, X. H. (2019). Hybrid-fiber-reinforced concrete used in frozen shaft wall structure in coal mines. Materials, 12(23), 3988. https://doi.org/10.3390/ma1223398810.3390/ma12233988 ↗
33. Yao, Z. S., Wang, C., Xue, W. P., Zhang, P., & Fang, Y. (2021). Experimental study on the dynamic mechanical properties of high-performance hybrid fiber-reinforced concrete of mine shaft wall. J Mater Res Technol, 2021(14), 888–900. https://doi.org/10.1016/j.jmrt.2021.07.01510.1016/j.jmrt.2021.07.015 ↗
34. Zhang, J. J., Zhang, X. D., & Wu, Z. J. (2014). Research on mechanical behavior of concrete shaft wall under non-uniform lateral pressure. J Guangxi Univ., 39(02), 237–244. https://doi.org/10.13624/j.cnki.issn.1001-7445.2014.02.00610.13624/j.cnki.issn.1001-7445.2014.02.006 ↗
35. Zhang, W., Wang, B. S., & Wang, Y. (2018). Elastic analysis of nonhomogeneous frozen wall under nonaxisymmetric ground stress field and in state of unloading. Adv Mater Sci Eng, 2018(5), 1–13. https://doi.org/10.1155/2018/239143110.1155/2018/2391431 ↗
36. Zhang, P., Yao, Z. S., Xue, W. P., & Mu, K. H. (2020). Study on mechanical properties and microstructure of hybrid fiber shaft wall concrete. J Anhui Univ Sci Technol, 40(03), 33–38.
37. Zhao, J., & Lin, B. (2014). Stress measurement analysis of freezing shaft wall in Gubei mine auxiliary shaft. Coal Mine Saf, 45(05), 183–186.