Concentrically Loaded Circular RC Columns Partially Confined with FRP
Source abstract
Abstract
Wrapping reinforced concrete (RC) columns with fiber reinforced polymer (FRP) composites is effective in increasing their capacity. The current state of the art concentrates primarily on fully wrapped columns and few studies dealt with partially wrapped ones. The objective herein is to evaluate the effectiveness of partial wraps (or strips) and to develop a confined concrete compressive stress-strain (f c c ) model that accounts for partial wrapping. Three-dimensional finite element (FE) models are generated to evaluate the influence of different parameters on the behavior of concentrically loaded RC circular columns that are partially and fully wrapped with FRP. The results indicated an increase in ductility as the number of FRP strips is increased, and revealed that longitudinal steel had little influence on the confined f c c relationship. The proposed f c c model, derived from the parametric study, accounts for the effect of partial and full confinement, the unconfined concrete strength f c , and yielding of transverse steel. Comparison of the results generated using the proposed model with FE and experimental results are in good agreement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. ACI 318-11. (2011). Building Code Requirements for Structural Concrete. Farmington: American Concrete Institute.
2. ANSYS. (2012). ANSYS Academic Research, Release 14.0. Canonsburg: ANSYS, Inc.
3. Barros, J., & Ferreira, D. (2008). Assessing the efficiency of CFRP discrete confinement systems for concrete cylinders. Journal of Composites for Construction, 12(2), 134–148.10.1061/(ASCE)1090-0268(2008)12:2(134) ↗
4. Cui, C., & Sheikh, S. (2010). Experimental study of normal- and high-strength concrete confined with fiber-reinforced polymers. Journal of Composites for Construction, 14(5), 553–561.10.1061/(ASCE)CC.1943-5614.0000116 ↗
5. Demers, M., & Neale, K. W. (1999). Confinement of reinforced concrete columns with fiber-reinforced composite sheets-an experimental study. Canadian Journal of Civil, 26(2), 226–241.10.1139/l98-067 ↗
6. El Fattah, A. M. A., & Rasheed, H. A. (2015). Numerical Procedure to Generate Interaction Diagrams for Circular Concrete Columns Wrapped with FRP. ACI Special Publication, 301, 1–20.
7. Hawileh, R., El-Maaddawy, T. A., & Naser, M. (2012). Non-linear finite element modeling of concrete deep beams with openings strengthened with externally-bonded composites. Materials & Design, Elsevier, 42, 378–387.10.1016/j.matdes.2012.06.004 ↗
8. Hawileh, R., Naser, M., & Abdalla, J. A. (2013). Finite element simulation of reinforced concrete beams externally strengthened with short-length CFRP plates. Composites Part B: Engineering, Elsevier, 45(1), 1722–1730.10.1016/j.compositesb.2012.09.032 ↗
9. Lam, L., & Teng, J. G. (2003). Design-oriented stress–strain model for FRP-confined concrete. Construction and Building Materials, 17, 471–489.10.1016/S0950-0618(03)00045-X ↗
10. Lee, J.-Y., Kim, J.-K., Yi, C.-K., Jeong, H.-S., & Kim, S.-W. (2010). Compressive response of concrete confined with steel spirals and FRP composites. Journal of Composite Materials, 44(4), 481–504.10.1177/0021998309347568 ↗
11. Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical stress–strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1826.10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
12. Mirmiran, A., & Shahawy, M. (1997). Behavior of concrete columns confined by fiber composites. Journal of Structural Engineering, 123(5), 583–590.10.1061/(ASCE)0733-9445(1997)123:5(583) ↗
13. Mirmiran, A., Zagers, K., & Yuan, W. (2000). Nonlinear finite element modeling of concrete confined by fiber composites. Finite Elements in Analysis and Design, 35(1), 79–96.10.1016/S0168-874X(99)00056-6 ↗
14. Nanni, A., & Bradford, N. M. (1995). FRP jacketed concrete under uniaxial compression. Construction and Building Materials, 9(2), 115–124.10.1016/0950-0618(95)00004-Y ↗
15. Pellegrino, C., & Modena, C. (2010). Analytical model for FRP confinement of concrete columns with and without internal steel reinforcement. Journal of Composites for Construction, 14(6), 693–705.10.1061/(ASCE)CC.1943-5614.0000127 ↗
16. Richard, R. M., & Abbott, B. J. (1975). Versatile elastic-plastic stress strain formula. Journal of the Engineering Mechanics Division., 101(4), 511–515.10.1061/JMCEA3.0002047 ↗
17. Rocca, S., Galati, N., Nanni, A. (2006) Large-Size Reinforced Concrete Columns Strengthened with Carbon FRP: Experimental Evaluation. Third International Conference on FRP Composites in Civil Engineering (CICE 2006), Miami, FL, USA.
18. Saadatmanesh, H., Ehsani, M. R., & Li, M. W. (1994). Strength and ductility of concrete columns externally reinforced with fiber composite straps. ACI Structural Journal, 91(4), 434–447.
19. Teng, J. G., Huang, Y. L., Lam, L., & Ye, L. P. (2007). Theoretical model for fiber-reinforced polymer-confined concrete. Journal of Composites for Construction, 11(2), 201–210.10.1061/(ASCE)1090-0268(2007)11:2(201) ↗
20. Toutanji, H. (1999). Stress–strain characteristics of concrete columns externally confined with advanced fiber composite sheets. ACI Material Journal, 96(3), 397–404.
21. Varma, R. K., Barros, J. A. O., & Sena-Cruz, J. M. (2009). Numerical model for CFRP confined concrete elements subject to monotonic and cyclic loadings. Composites: Part B, 40(8), 766–775.10.1016/j.compositesb.2009.05.005 ↗
22. Wu, H., Wang, Y., Liu, Y., & Li, X. (2009). Experimental and computational studies on high-strength concrete circular columns confined by aramid fiber-reinforced polymer sheets. Journal of Composites for Construction, 13(2), 125–134.10.1061/(ASCE)1090-0268(2009)13:2(125) ↗