Launch Performance Degradation of the Rupture-Type Missile Canister
Source abstract
Abstract
This paper describes the degradation of launch performance caused by the remnants of a missile canister cover with a sabot interface, on interference with adjacent structures. First, by including the material plastic behavior and element deletion, we predict interference between the structures and the detached part, followed by excessive deformation. Second, we verify that the support ring deformation, which is induced by an interaction with the cover remains, increases for fastener separations with abnormal fastener installations. This increase further triggers interference with the boosters on the bottom of a missile. Lastly, we analyze the variation of material property in a high-speed environment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA
Department of Electric Vehicle Engineering, Dongshin University, Najusi, Jeonnam 58245, Korea
References (13)
Show source-provided references
1. Kim, R., and Ahn, J. (2013). Canister and Its Manufacturing. (KR101234219B1), Korean Patent, Daejeon, Korea.
2. Test Technique for Performance Verification of Fracture-Type Canister Cover10.9766/KIMST.2013.16.4.449 ↗
3. Yang, Y. (2014, January 22). Study on the Removal Mechanism of Canister End Caps using the Shock Wave. Proceedings of the Spring Conference of Korean Society for Computational Fluid Engineering, Jeju, Korea.
4. Yang, Y., Kim, Y., Kim, G., Byun, Y., Jeon, H., and Park, H. (2018, January 14–15). Study on the Opening of Canister End Cover using a Rocket Motor Pressure. Proceedings of the Regular Conference of Korean Institute of Military Science and Technology, Jeju, Korea.
5. Vries, D.D. (2009). Characterization of Polymeric Foams, Eindhoven University of Technology. Technical Report, No. MT 09-22.
6. Nuclear Engineering Division (2006). Study on Degradation of a Commercial Rigid Polyurethane Foam Used for Filling of Process Gas Equipment (PGE) and Pipes and Corrosion Behavior of Pipes at K-25/K-27, Argonne National Laboratory. Technical Report, No. ANL-06/32.
7. Zhang, Y., Outeiro, J.C., and Mabrouki, T. (2015, January 11–12). On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4 V Using Three Types of Numerical Models of Orthogonal Cutting. Proceedings of the 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.10.1016/j.procir.2015.03.052 ↗
8. Neutral Nation’ Finland (2018, December 15). Introduces the US Navy Missile Costing 800 Billion Won, Available online: https://goo.gl/VUZSef.
9. Isotropic Clamped-Free Thin Annular Circular Plate Subjected to a Concentrated Load10.1115/1.2165235 ↗
10. Thermal Aging Effect on Mechanical Properties of Polyurethane10.1080/1023666X.2014.932644 ↗
11. Kim, S., Huh, H., Kim, D., and Moon, M. (2005, January 27–30). Evaluation of Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body. Proceedings of the 13th International Pacific Conference on Automotive Engineering, Gyeongju, Korea.
12. Karkalos, N.E., and Markopoulos, A.P. (2017, January 5–6). Determination of Johnson-Cook Material Model Parameters by an Optimization Approach using the Fireworks Algorithm. Proceedings of the 11th International Conference Interdisciplinarity in Engineering, Tirgu-Mures, Romania.
13. Properties of the Polyurethane (PU) Light Foams