Study on Reduction Effect of Vibration Propagation due to Internal Explosion Using Composite Materials
Source abstract
Abstract
Abstract With the increasing installation cases of underground explosive facilities (e.g., ammunition magazines, hydrogen tanks, etc.) in urban areas in recent years, the risk of internal explosions is also increasing. However, few studies on the measures for reducing damage by the ground vibration have been conducted except for maintaining safety distance. In this study, a method for attenuating the vibration propagated outward by installing a blast-proof panel was numerically and experimentally investigated. Two cubical reinforced concrete structures were manufactured according to the concrete strength and a blast-proof panel was installed on only one side of the structure. Then, acceleration sensors were installed on the external surface to evaluate the propagation of vibration outward depending on the installation of a blast-proof panel. Before a field experiment, a preliminary numerical simulation was performed. The results showed that the acceleration propagated outward could be effectively reduced by installing a blast-proof panel. Even though the performance of a blast-proof panel on vibration reduction was also investigated in the field experiment, significantly larger absolute accelerations were estimated due to the different experimental conditions. Finally, the vibration reduction effect of the blast-proof panel was numerically evaluated according to its thickness and the internal explosion load. A blast-proof panel more effectively reduced the acceleration propagated outward as its thickness increased and the explosion load decreased.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Transportation Safety and Impact Analysis · Simulation and Modeling Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Abbasi, T., & Abbasi, S. A. (2007). Dust explosions–Cases, causes, consequences, and control. Journal Hazardous Materials., 140(1–2), 7–44. https://doi.org/10.1016/j.jhazmat.2006.11.00710.1016/j.jhazmat.2006.11.007 ↗
2. TM Army. (1986). Technical Manual 5–855–1; Fundamentals of Protective Design for Conventional Weapons
3. Baek, J. H., Lee, H. J., & Jang, C. B. (2016). Comparison of H2, LNG, and LPG explosion characteristics in a limited space using CFD Simulation. Journal Korean Institute Gas, 20(3), 12–21.10.7842/kigas.2016.20.3.12 ↗
4. Cheng, Z., & Shi, Z. (2014). Vibration attenuation properties of periodic rubber concrete panels. Construction and Building Materials., 50, 257–265. https://doi.org/10.1016/j.conbuildmat.2013.09.06010.1016/j.conbuildmat.2013.09.060 ↗
5. Choi, Y., Lee, J., Yoo, Y. H., & Yun, K. J. (2016). A study on the behavior of blast proof door under blast load. International Journal of Precision Engineering and Manufacturing, 17(1), 119–124. https://doi.org/10.1007/s12541-016-0015-y10.1007/s12541-016-0015-y ↗
6. Choi, W. C., Yun, H. D., Cho, C. G., & Feo, L. (2014). Attempts to apply high performance fiber-reinforced cement composite (HPFRCC) to infrastructures in South Korea. Composite Structures, 109, 211–223. https://doi.org/10.1016/j.compstruct.2013.10.02710.1016/j.compstruct.2013.10.027 ↗
7. Department of Defense. (2017). Manual of DOD Ammunition and Explosives Safety Standards. Alexandria: Department of Defense Explosive Safety Board.
8. Due-Hansen, M. E., & Dullum, O. (2017). Review and analysis of the explosion accident in Drevja, Norway: A consequence of fire in a mobile explosives manufacturing unit (MEMU) carrying precursors for the on-site production of bulk explosives. Safety Science, 96, 33–40. https://doi.org/10.1016/j.ssci.2017.03.00310.1016/j.ssci.2017.03.003 ↗
9. Genova, B., Silvestrini, M., & Trujillo, F. L. (2008). Evaluation of the blast-wave overpressure and fragments initial velocity for a BLEVE event via empirical correlations derived by a simplified model of released energy. Journal of Loss Prevention in the Process Industries, 21(1), 110–117. https://doi.org/10.1016/j.jlp.2007.11.00410.1016/j.jlp.2007.11.004 ↗
10. Golewski, G. L. (2019a). A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads. Composite Structures., 223, 110939. https://doi.org/10.1016/j.compstruct.2019.11093910.1016/j.compstruct.2019.110939 ↗
11. Golewski, G. L. (2019b). A new principles for implementation and operation of foundations for machines: A review of recent advances. Structural Engineering and Mechanics., 71(3), 317–327. https://doi.org/10.12989/sem.2019.71.3.31710.12989/sem.2019.71.3.317 ↗
12. Golewski, G. L. (2021a). On the special construction and materials conditions reducing the negative impact of vibrations on concrete structures. Materials Today: Proceedings., 45(5), 4344–4348. https://doi.org/10.1016/j.matpr.2021.01.03110.1016/j.matpr.2021.01.031 ↗
13. Golewski, G. L. (2021b). The beneficial effect of the addition of fly ash on reduction of the size of microcracks in the ITZ of concrete composites under dynamic loading. Energies, 14(3), 668. https://doi.org/10.3390/en1403066810.3390/en14030668 ↗
14. Homae, T., Sugiyama, Y., Wakabayashi, K., Matsumura, T., & Nakayama, Y. (2016). Water and sand for blast pressure mitigation around a subsurface magazine. Sci. Tech. Energetic Materials., 77, 18–21.
15. Igra, O., Falcovitz, J., Houas, L., & Jourdan, G. (2013). Review of methods to attenuate shock/blast waves. Progress in Aerospace Sciences, 58, 1–35. https://doi.org/10.1016/j.paerosci.2012.08.00310.1016/j.paerosci.2012.08.003 ↗
16. Jung, H., Park, S., Kim, S., & Park, C. (2017). Performance of SIFCON based HPFRCC under Field Blast Load. Procedia Eng., 210, 401–408. https://doi.org/10.1016/j.proeng.2017.11.09410.1016/j.proeng.2017.11.094 ↗
17. Kunieda, M., & Rokugo, K. (2006). Recent progress on HPFRCC in Japan required performance and applications. Journal of Advanced Concrete Technology, 4(1), 19–33. https://doi.org/10.3151/jact.4.1910.3151/jact.4.19 ↗
18. Langdon, G. S., & Schleyer, G. K. (2005a). Inelastic deformation and failure of profiled stainless steel blast wall panels. Part I: experimental investigations. International Journal of Impact Engineering., 31(4), 341–369. https://doi.org/10.1016/j.ijimpeng.2003.12.00210.1016/j.ijimpeng.2003.12.002 ↗
19. Langdon, G. S., & Schleyer, G. K. (2005b). Inelastic deformation and failure of profiled stainless steel blast wall panels. Part II: analytical modelling considerations. International Journal of Impact Engineering., 31(4), 371–399. https://doi.org/10.1016/j.ijimpeng.2003.12.01110.1016/j.ijimpeng.2003.12.011 ↗
20. Langdon, G. S., & Schleyer, G. K. (2006). Deformation and failure of profiled stainless steel blast wall panels. Part III: Finite element simulations and overall summary. International Journal of Impact Engineering., 32(6), 988–1012. https://doi.org/10.1016/j.ijimpeng.2004.08.00210.1016/j.ijimpeng.2004.08.002 ↗
21. Lee, J., & Choi, Y. (2018). Effects of a near-field explosion in a tunnel behind a Blast Proof Door. International Journal of Precision Engineering and Manufacturing, 19(4), 625–630. https://doi.org/10.1007/s12541-018-0075-210.1007/s12541-018-0075-2 ↗
22. Masellis, M. (2000). Fire disaster in a motorway tunnel. Prehospital and Disaster Medicine, 15(S2), S74–S74. https://doi.org/10.1017/S1049023X0003180010.1017/S1049023X00031800 ↗
23. Ministry of National Defense. (2019). Instruction of Safety Control Standard for Ammunition and Explosion. Seoul: Ministry of National Defense.
24. Moradf, R., & Groth, K. M. (2019). Hydrogen storage and delivery: Review of the state of the art technologies and risk and reliability analysis. International Journal of Hydrogen Energy, 44(23), 12254–12269.10.1016/j.ijhydene.2019.03.041 ↗
25. North Atlantic Treaty Organization. (2015). Allied Ammunition Storage and Transport Publication (AASTP)-1: Nato Guidelines for the Storage of Military Ammunition and Explosives; NATO Standardization Office. Brussels, Belgium.
26. Park, S., Kim, K.-J., & Park, Y.-J. (2019). Safety evaluation method for ground ammunition and explosive storage facilities due to underground tunnel blast. Journal of the Korea Institute of Building Construction, 19(4), 331–339.
27. Park, S., & Park, Y. J. (2020). Effect of underground-type ammunition magazine construction in respect of civil and military coexistence. Sustainability, 12(21), 9285. https://doi.org/10.3390/su1221928510.3390/su12219285 ↗
28. Pyo, D. Y., & Lim, O. T. (2019). A study on explosive hazardous areas in hydrogen handling facility. Transactions of the Korean Hydrogen and New Energy Society., 30(1), 29–34.
29. Qiang, Q., Yuge, D., Shuguang, D., Hu, W., & Liangguo, H. (2020). Reliability analysis of counterweight cover-type explosion door in different periods. Journal of Failure Analysis and Prevention, 20(5), 1738–1753. https://doi.org/10.1007/s11668-020-00981-z10.1007/s11668-020-00981-z ↗
30. Riedel, W., Kawai, N., & Kondo, K. I. (2009). Numerical assessment for impact strength measurements in concrete materials. International Journal of Impact Engineering, 36(2), 283–293. https://doi.org/10.1016/j.ijimpeng.2007.12.01210.1016/j.ijimpeng.2007.12.012 ↗
31. Ruggiero, A., Bonora, N., Curiale, G., De Muro, S., Iannitti, G., Marfia, S., Sacco, E., Scafati, S., & Testa, G. (2019). Full scale experimental tests and numerical model validation of reinforced concrete slab subjected to direct contact explosion. International Journal of Impact Engineering. https://doi.org/10.1016/j.ijimpeng.2019.05.02310.1016/j.ijimpeng.2019.05.023 ↗
32. Silvestrini, M., Genova, B., & Trujillo, F. L. (2009). Energy concentration factor A simple concept for the prediction of blast propagation in partially confined geometries. Journal of Loss Prevention in the Process Industries, 22(4), 449–454. https://doi.org/10.1016/j.jlp.2009.02.01810.1016/j.jlp.2009.02.018 ↗
33. Sklavounos, S., & Rigas, F. (2006). Computer-aided modeling of the protective effect of explosion relief vents in tunnel structures. Journal of Loss Prevention in the Process Industries, 19(6), 621–629. https://doi.org/10.1016/j.jlp.2006.03.00210.1016/j.jlp.2006.03.002 ↗
34. Sugiyama, Y., Tanaka, T., Matsuo, A., Homae, T., Wakabayashi, K., Matsumura, T., & Nakayama, Y. (2016). Numerical simulation of blast wave mitigation achieved by water inside a subsurface magazine model. Journal of Loss Prevention in the Process Industries, 43, 521–528. https://doi.org/10.1016/j.jlp.2016.07.01510.1016/j.jlp.2016.07.015 ↗
35. U.S. Department of Defense. (2008). Unified Facilities Criteria (UFC) 3–340-02 structures to resist the effects of accidental explosion. Washington: U.S. Department of Defense.
36. Uystepruyst, D., & Monnoyer, F. (2015). A numerical study of the evolution of the blast wave shape in rectangular tunnels. Journal of Loss Prevention in the Process Industries, 34, 225–231. https://doi.org/10.1016/j.jlp.2015.03.00310.1016/j.jlp.2015.03.003 ↗
37. Yoo, D. Y., Park, J. J., & Kim, S. W. (2017). Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type. Composite Structures, 174, 263–276. https://doi.org/10.1016/j.compstruct.2017.04.06410.1016/j.compstruct.2017.04.064 ↗
38. Zhang, S., Hongtao, M. A., Huang, X., & Peng, S. (2020). Numerical simulation on methane-hydrogen explosion in gas compartment in utility tunnel. Process Safety and Environmental Protection., 140, 100–110.10.1016/j.psep.2020.04.025 ↗
39. Zhang, Q., Qin, B., & Lin, D. C. (2013). Estimation of pressure distribution for shock wave through the junction of branch gallery. Safety Science, 57, 214–222. https://doi.org/10.1016/j.ssci.2013.02.00910.1016/j.ssci.2013.02.009 ↗
40. Zhang, J., & Wang, L. (2019). Personnel casualty assessment for explosion in the subway platform. Shock and Vibration, 2019, 1–12. https://doi.org/10.1155/2019/819484510.1155/2019/8194845 ↗
41. Zhang, B., Zhao, W., Wang, W., & Zhang, X. (2014). Pressure characteristics and dynamic response of coal mine refuge chamber with underground gas explosion. Journal of Loss Prevention in the Process Industries, 30, 37–46. https://doi.org/10.1016/j.jlp.2014.03.00910.1016/j.jlp.2014.03.009 ↗
42. Zheng, L., Huo, X. S., & Yuan, Y. (2008). Experimental investigation on dynamic properties of rubberized concrete. Construction and Building Materials., 22(5), 939–947. https://doi.org/10.1016/j.conbuildmat.2007.03.00510.1016/j.conbuildmat.2007.03.005 ↗