Long-term Compressive Strength Properties of Concrete Incorporating Admixtures: Outdoor Exposure Testing in a Coastal Environment
Source abstract
Abstract
Abstract In this study, concrete specimens were fabricated based on domestically manufactured materials, and long-term exposure tests were conducted in a domestic coastal environment. This study analyzes the long-term compressive strength characteristics of concrete mixed with admixtures. The mixed materials used were divided into blast furnace slag and fly ash. The blast furnace slag and fly ash were, respectively, produced by replacing ~ 30% and ~ 15% of the cement. The compressive strength was measured at 28 day, 1 year, and 10 years of age and compared with that of ordinary concrete. In addition, the long-term compressive strength results obtained in this study were compared with those of concrete mixed with admixtures reported in the literature. The strengths of the ordinary specimen at 1 year and 10 years of age increased by ~ 10 MPa and ~ 22 MPa compared with those at 28 day of age. However, concrete mixed with admixtures yielded compressive strength increases of ~ 5 MPa and ~ 26 MPa at 1 year and 10 years of age, respectively, compared with those at 28 day of age. A comparison of the compressive strengths of concrete mixed with admixtures reported in the literature (based on age) and those obtained in this study showed that there was an initial strength difference in the range of 10–25%. However, the compressive strength at 10 years of age was almost similar to those reported in the literature with differences of less than 5%. These findings confirmed that when using pozzolanic admixtures, the development rate of the initial strength may vary owing to various factors; however, the long-term strength converges within a certain range.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Abdelkader, B., El-Hadj, K., & Karim, E. (2010). Efficiency of granulated blast furnace slag replacement of cement according to the equivalent binder concept. Cement and Concrete Composites, 32(3), 226–231.10.1016/j.cemconcomp.2009.11.004 ↗
2. American Concrete Institute Committee 209. (1997). Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures (ACI 209R-92).
3. Bilim, C., Atis, C. D., Tanyildizi, H., & Karahan, O. (2009). Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network. Advances in Engineering Software, 40(5), 334–340.10.1016/j.advengsoft.2008.05.005 ↗
4. Bilodeau, A., Malhotra, V. M., & Golden, D. M. (1998). Mechanical Properties and Durability of Structural Lightweight Concrete Incorporating High-Volumes of Fly ash. ACI International, 178, 447–474.
5. CEB-FIP. (2010). CEB-FIP Model Code 2010.
6. Chofore, A. T., Mitikie, B. B., & Haile, A. T. (2023). Experimental investigation on bond, microstructure and durability of expired hardened cement blended with ground granulated blast furnace slag as partial replacement of cement in high-strength Concrete. International Journal of Concrete Structures and Materials, 17(1), 103–117.
7. Hashimoto, M., Kurata, K., Ohtsuka, Y., & Dan, Y. (2021). 41 Year long-term durability of high volume blast-furnace slag cement. Journal of Advanced Concrete Technology, 19(3), 248–258.10.3151/jact.19.248 ↗
8. Hooton, R. D., Rogers, C., MacDonald, C. A., & Ramlochan, T. (2013). Twenty-year field evaluation of alkali-silica reaction mitigation. ACI Materials Journal, 110(5), 539–548.
9. Hwang, K., Noguchi, T., & Tomosawa, F. (2004). Prediction model of compressive strength development of fly-ash concrete. Cement and Concrete Research, 34(12), 2269–2276.10.1016/j.cemconres.2004.04.009 ↗
10. Irina, S. O., Dubravka, B., & Dunja, M. (2010). Evaluation of service life design models on concrete structures exposed to marine environment. Materials and Structures, 43(10), 1397–1412.10.1617/s11527-010-9590-z ↗
11. Japan Society of Civil Engineering (JSCE). (2007). Standard Specification for Concrete Structures Design. JSCE-Guidelines for Concrete, 15, 139–142.
12. Kanta, R. M., & Kumar Ch, N. S. (2022). Evaluation of strength properties of the concrete prepared from class F fly ash. IOP Conference Series: Earth and Environmental Science, 982, 1–14.
13. KICT. (2003). Long Term Measurement of Airborne Chlorides and Durabiltiy of Concrete Mixed with Sea Sand.
14. KICT. (2006). Long Term Measurement of Airborne Chlorides and Durabiltiy of Concrete Mixed with Sea Sand.
15. Kim, J., Park, W. S., Jang, Y., Kim, S., Kim, S. W., Nam, Y., Kim, D. G., & Rokugo, K. (2016). Mechanical properties of energy efficient concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume. International Journal of Concrete Structures and Materials, 10(3), 97–108.10.1007/s40069-016-0162-7 ↗
16. Kouloumbi, N., Batis, G., & Malalmi, C. (1994). The anticorrosive effect of fly ash, slag and a Greek pozzolan in reinforced concrete. Cement and Concrete Composites, 16(4), 253–260.10.1016/0958-9465(94)90037-X ↗
17. Kumar, S., Kumar, R., Bandopadhyay, A., Alex, T. C., Ravi Kumar, B., Das, S. K., & Mehrotra, S. P. (2008). Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of Portland slag cement. Cement and Concrete Composites, 30(8), 679–685.10.1016/j.cemconcomp.2008.05.005 ↗
18. Lee, B., Choi, Y., Kim, Y. G., Choi, J., & Kim, I. (2016a). A study on the durability improvement of highway-subsidiary concrete structure exposed to deicing salt and freeze-thaw. Journal of the Korea Institute for Structural Maintenance and Inspection, 20(4), 128–135.10.11112/jksmi.2016.20.4.128 ↗
19. Lee, B., & Lee, J. (2023). Review on the compressive strength development models by w/c ratio using the concrete specimens exposed in seaside for 15 years. Journal of the Korea Concrete Institute, 35(4), 389–395.10.4334/JKCI.2023.35.4.389 ↗
20. Lee, H., Jeon, C., Kim, J., Shim, J., & Jeon, I. (2015). Estimation of service life for expressway bridge subjected to chloride ingress from de-icer. Journal of the Korea Society of Disaster Information, 11(4), 548–555.10.15683/kosdi.2015.11.4.548 ↗
21. Lee, J., & An, G. (2012). Penetration properties of airborne chlorides on concrete exposed in marine environment. Journal of the Korea Concrete Institute, 24(5), 553–558.10.4334/JKCI.2012.24.5.553 ↗
22. Lee, J. W., Jang, Y. I., Park, W. S., & Kim, S. W. (2016b). A study on mechanical properties of porous concrete using cementless binder. International Journal of Concrete Structures and Materials, 10(4), 527–537.10.1007/s40069-016-0166-3 ↗
23. Lee, S. T. (2014). Effect of fineness levels of GGBFS on the strength and durability of concrete. Journal of the Korean Society of Civil Engineers, 34(4), 1095–1104.10.12652/Ksce.2014.34.4.1095 ↗
24. Liu, S., Wang, Z., & Li, X. (2014). Long-term properties of concretecontaining ground granulated blast furnace slag and steel slag. Magazine of Concrete Research, 66(21), 1095–1103.10.1680/macr.14.00074 ↗
25. Ministry of Land, Infrastructure and Transport (MOLIT). (2021). Detailed Guidelines for Safety and Maintenance of Facilities.
26. Ministry of Construction and Transportation (2022). Korean design standard of concrete structures (KDS 14 20 40: 2021).
27. Mohammed, T. U., Hamada, H., & Yamaji, T. (2003). Marine durability of 30-year old concrete made with different cements. Journal of Advanced Concrete Technology, 1(1), 63–75.10.3151/jact.1.63 ↗
28. Mohan Malhotra, V., Zhang, M. H., Read, P. H., & Ryell, J. (2000). Long-term mechanical properties and durability characteristics of high-strength/high-performance concrete incorporating supplementary cementing materials under outdoor exposure. ACI Materials Journal, 97(5), 518–525.
29. Mustafa, M. A., & Yusof, K. M. (1994). Atmospheric chloride penetration into concrete in semitropical marine environment. Cement and Concrete Research, 24(4), 661–670.10.1016/0008-8846(94)90190-2 ↗
30. Naik, T. R., Ramme, B. W., Kraus, R. N., & Siddique, R. (2003). Long-term performance of high-volume fly ash concrete pavements. ACI Materials Journal, 100(2), 150–155.
31. Nath, P., & Sarker, P. (2011). Effect of fly ash on the durability properties of high strength concrete. Procedia Engineering, 14, 1149–1156.10.1016/j.proeng.2011.07.144 ↗
32. Oner, A., & Akyuz, S. (2007). An experimental study on optimum usage of GGBS for the compressive strength of concrete. Cement and Concrete Composites, 29(6), 505–514.10.1016/j.cemconcomp.2007.01.001 ↗
33. Oner, A., Akyuzb, T. S., & Yildiza, R. (2005). An experimental study on strength development of concrete containing fly. Cement and Concrete Research, 35(6), 1165–1171.10.1016/j.cemconres.2004.09.031 ↗
34. Oner, A., Erdogdu, K., & Gunlu, A. (2003). Effect of components fineness on strength of blast furnace slag cement. Cement and Concrete Research, 33(4), 463–469.10.1016/S0008-8846(02)00713-5 ↗
35. Papadakis, V. G. (1999). Effect of fly ash on Portland cement systems: Part I. Low-calcium fly ash. Cement and Concrete Research, 29(11), 1727–1736.10.1016/S0008-8846(99)00153-2 ↗
36. Park, J. S., Yoon, Y. S., & Kwon, S. J. (2018). Relations analysis between strength and time-parameter in high performance concrete containing GGBFS cured for 1 year. Journal of the Korea Concrete Institute, 30(4), 375–381.10.4334/JKCI.2018.30.4.375 ↗
37. Shariq, M., Abba, H., & Prasad, J. (2010). Effect of GGBFS on time dependent compressive strength of concrete. Construction and Building Materials, 24(8), 1469–1478.10.1016/j.conbuildmat.2010.01.007 ↗
38. Sivasundaram, V., Carette, G. G., & Malhotra, V. M. (1990). Long-term strength development of high-volume fly ash concrete. Cement and Concrete Composites, 12(4), 263–270.10.1016/0958-9465(90)90005-I ↗
39. Thomas, M. D. A., & Matthewsb, J. D. (2004). Performance of pfa concrete in a marine environment-10-year results. Cement and Concrete Composites, 26(1), 5–20.10.1016/S0958-9465(02)00117-8 ↗
40. Washa, G. W., & Wendt, K. F. (1975). Fifty years properties of concrete. Journal of the American Concrete Institute, 72(1), 20–28.
41. Yoon, Y. S., & Kwon, S. J. (2020). Evaluation of chloride behavior and service life in long-term aged FA concrete through probabilistic analysis. Journal of the Korean Recycled Construction Resources Institute, 8(3), 276–285.
42. Yoshitaka, M. Y. (2015). Slag cement-related products which utilized a property of the ground granulated blast furnace slag. NIPPON Steel and Sumitomo Metal Technical Report, 109, 114–118.