An Experimental Study on Bond Strength of Reinforcing Steel in Self-Consolidating Concrete
Source abstract
Abstract
An experimental investigation was conducted to compare the bond strength of reinforcing steel in self-consolidating concrete (SCC) with conventional concrete (CC). This study investigated two different compressive strengths of SCC as well as CC. The experimental program consisted of 24 pull-out specimens as well as 12 full-scale beams (three for each concrete type and strength). The pull-out specimens were based on RILEM recommendations, and the beam specimens were tested under a simply supported four-point loading condition. The CC test results served as a control and were used to evaluate the results from the SCC pull-out and beam specimen tests. Furthermore, a comparison was performed between results of this study and a bond database of CC specimens. These comparisons indicate that SCC beams possess comparable or slightly greater bond strength than CC beams.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. ACI Committee 237. (2007). Self-consolidaing concrete (ACI 237R-07). Farmington Hills, MI: American Concrete Institute.
2. ACI Committee 408. (2003). Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03). Farmington Hills, MI: American Concrete Institute.
3. Al-Sulaimani, G. J., Kaleemullah, M., Basunbul, I. A., & Rasheeduzzafar. (1990). Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members. ACI Structural Journal,87(2), 220–231.
4. American Association of State and Highway Transportation Officials (AASHTO). (2007). AASHTO LRFD Bridge Design Specifications (4th ed., pp. 72–84). Washington DC: AASHTO.
5. American Concrete Institute ACI Committee. (2008). Building code requirements for structural concrete ACI 318-08 and commentary 318R-08. ACI 318-08/318R-08 (pp. 155–168). Farmington Hills, MI: American Concrete Institute.
6. Andrade, C., Arteaga, A., Lopez-Hombrados, C., & Vazquez, A. (2001). Tests on bonds of galvanized rebar and concrete cured in seawater. Journal of Materials in Civil Engineering,13(5), 319–324.10.1061/(ASCE)0899-1561(2001)13:5(319) ↗
7. AS 3600. (2009). Concrete structures (pp. 105–109). Sydney: Standards Australia.
8. ASTM A615/A615M. (2009). Standard specification for deformed and plain carbon-steel bars for concrete reinforcement. West Conshohocken, PA: ASTM.
9. ASTM C 78/C 78M. (2010). Standard test method for flexural strength of concrete (using simple beam with third-point loading. West Conshohocken, PA: ASTM.
10. ASTM C 496/C 496M. (2011). Standard test method for splitting tensile strength of cylindrical concrete. West Conshohocken, PA: ASTM.
11. ASTM C 39/C 39M. (2012). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM.
12. Belaid, F., Arlique, G., & Francois, R. (2001). Effect of bar properties on bond strength of galvanized reinforcement. Journal of Materials in Civil Engineering,13(6), 454–458.10.1061/(ASCE)0899-1561(2001)13:6(454) ↗
13. Benmokrane, B., Challal, O., & Masmoudi, R. (1996). Flexural response of concrete beams reinforced with FRP reinforcing bars. ACI Structural Journal,91(2), 46–55.
14. Carins, J., & Abdullah, R. (1994). Fundamental tests on the effects of an epoxy coating on bond strength. ACI Materials Journal,91(4), 331–338.
15. Castel, A., Thierry, V., Kriengkai, V., & Raoul, F. (2006). Effect of reinforcing bar orientation and location on bond with self-consolidating concrete. ACI Structural Journal,103, S103–S159.
16. Castel, A., Vidal, T., & Francois, R. (2010). Bond and cracking properties of self-consolidating concrete. Journal of Construction and Building Materials,24(7), 1222–1231.10.1016/j.conbuildmat.2009.12.017 ↗
17. Chan, Y., Chen, Y., & Liu, Y. (2003). Development of bond strength of reinforcement steel in self-consolidating concrete. ACI Structural Journal,100, S100–S152.
18. CSA CAN3-A23.3. (2004). Design of concrete standards for buildings (pp. 53–61). Ontario: Rexdale.
19. Daczko, J., & Vachon, M. (2006). “Self consolidating concrete (SCC)”, significance of tests and properties of concrete and concrete-making materials STP 169D (pp. 637–645). West Conshohocken: ASTM International.10.1520/STP37774S ↗
20. Dehn, F., Holschemacher, K., & Weibe, D. (2000). Self-compacting concrete (SCC) time development of the material properties and the bond behavior. Universität Leipzig. Retrieved July 2012, from http://www.wilbertprecast.com/documents/scc.pdf .
21. Foroughi-Asl, A., Dilmaghani, S., & Famili, H. (2008). Bond strength of reinforcement steel in self-compacting concrete. International Journal of Civil Engineering,6(1), 24–33.
22. Hassan, A., Hossain, K., & Lachemi, M. (2010). Bond strength of deformed bars in large reinforced concrete members cast with industrial self-consolidating concrete mixture. Journal of Construction and Building Materials,24(4), 520–530.10.1016/j.conbuildmat.2009.10.007 ↗
23. Japan Society of Civil Engineers. (2007). Standard specification for concrete structure (pp. 154–159), JSCE No. 15. Tokyo: JSCE (in Japanese).
24. Okamura, H. (1997). Self-compacting high-performance concrete. Concrete International,19, 50–54.
25. Ozawa, K., Maekawa, K., Kunishima, M., & Okamura, H. (1989). Development of high performance concrete based on the durability design of concrete structures. In Proceedings of the second East-Asia and pacific conference on structural engineering and construction (EASEC-2), Chiang Mai (Vol. 1, pp. 445–450).
26. RILEM 7-II-128. (1994). RC6: bond test for reinforcing steel. 1. Pull-Out Test. RILEM technical recommendations for the testing and use of construction materials (pp. 102–105). London: E & FN Spon.
27. Tighiouart, B., Benmokrane, B., & Gao, D. (1998). Investigation of bond in concrete member with fiber reinforced polymer (FRP) bars. Construction and Building Materials,12, 453–462.10.1016/S0950-0618(98)00027-0 ↗
28. Turk, K., Benli, A., & Calayir, Y. (2008). Bond strength of tension lap-splices in full scale self-consolidating concrete beams. Turkish Journal of Engineering and Environmental Sciences,32, 377–386.
29. Valcuende, M., & Parra, C. (2009). Bond behavior of reinforcement in self-compacting concrete. Journal of Construction and Building Materials,23, 162–170.10.1016/j.conbuildmat.2008.01.007 ↗