Re-Centring and Flexural Toughness Performance of Novel Steel Fibre-Reinforced Self-Compacting Concrete

1. Alizade, E., Alaee, F. J., & Zabihi, S. (2016). Effect of steel fibre corrosion on mechanical properties of steel fibre reinforced concrete. Asian Journal of Civil Engineering, 17(2), 147–158.

2. American Concrete Institute. (2018). ACI 544.4R-18: Guide to design with fiber-reinforced concrete. ACI.

3. Aslani, F., & Samali, B. (2014). Flexural toughness characteristics of self-compacting concrete incorporating steel and polypropylene fibres. Australian Journal of Structural Engineering, 15(3), 269–286. https://doi.org/10.7158/13287982.2014.1146516410.7158/13287982.2014.11465164 ↗

4. ASTM C1609/C1609M-19. (2019). Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International. West Conshohocken. PA.

5. Atiş, C., & Karahan, O. (2009). Properties of steel fibre reinforced fly ash concrete. Construction and Building Materials, 23(1), 392–399. https://doi.org/10.1016/j.conbuildmat.2007.11.00210.1016/j.conbuildmat.2007.11.002 ↗

6. Bangi, M. R., & Horiguchi, T. (2012). Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. Cement and Concrete Research, 42(2), 459–466. https://doi.org/10.1016/j.cemconres.2011.11.01410.1016/j.cemconres.2011.11.014 ↗

7. Berrocal, C. G., Fernandez, I., Lundgren, K., & Lofgren, I. (2017). Corrosion-induced cracking and bond behaviour of corroded reinforcement bars in SFRC. Composites Part b, Engineering, 113, 123–137. https://doi.org/10.1016/j.compositesb.2017.01.02010.1016/j.compositesb.2017.01.020 ↗

8. Boulekbache, B., Hamrat, M., Chemrouk, M., & Amziane, S. (2016). Flexural behaviour of steel fibre-reinforced concrete under cyclic loading. Construction and Building Materials, 126, 253–262. https://doi.org/10.1016/j.conbuildmat.2016.09.03510.1016/j.conbuildmat.2016.09.035 ↗

9. Cao, Y. Y., & Yu, Q. L. (2018). Effect of inclination angle on hooked end steel fibre pullout behavior in ultra-high performance concrete. Composite Structures, 201, 151–160. https://doi.org/10.1016/j.compstruct.2018.06.02910.1016/j.compstruct.2018.06.029 ↗

10. Chen, L. (1995). Flexural toughness of fibre-reinforced concrete. In: Ph.D. dissertation, Dept. Civ. Eng., Univ. British Columbia.

11. Dehghani, A., & Aslani, F. (2020). The effect of shape memory alloy, steel, and carbon fibres on fresh, mechanical, and electrical properties of self-compacting cementitious composites. Cement and Concrete Composites, 112, Article 103659. https://doi.org/10.1016/j.cemconcomp.2020.10365910.1016/j.cemconcomp.2020.103659 ↗

12. Dehghani, A., & Aslani, F. (2022). Flexural toughness and compressive stress–strain behaviour of pseudoelastic shape memory alloy fibre-reinforced concrete. Construction and Building Materials, 332, Article 127372. https://doi.org/10.1016/j.conbuildmat.2022.12737210.1016/j.conbuildmat.2022.127372 ↗

13. Dehghani, A., Aslani, F., & Liu, Y. (2022). Pullout behaviour of shape memory alloy fibres in self-compacting concrete and its relation to fibre surface microtopography in comparison to steel fibres. Construction and Building Materials, 323, Article 126570. https://doi.org/10.1016/j.conbuildmat.2022.12657010.1016/j.conbuildmat.2022.126570 ↗

14. Gopalaratnam, V. S., Shah, S. P., Batson, G., Criswell, M., Ramakishnan, V., & Wecharatana, M. (1991). Fracture toughness of fibre reinforced concrete. ACI Materials Journal, 88(4), 339–353. https://doi.org/10.14359/184010.14359/1840 ↗

15. Gopalaratnam, V., & Shah, S. (1987). Tensile failure of steel fibre-reinforced mortar. Journal of Engineering Mechanics, 113(5), 635–652. https://doi.org/10.1061/(asce)0733-9399(1987)113:5(635)10.1061/(asce)0733-9399(1987)113:5(635) ↗

16. Jansson, A., Lofgren, I., Lundgren, K., & Gylltoft, K. (2012). Bond of reinforcement in self-compacting steel-fibre-reinforced concrete. Magazine of Concrete Research, 64(7), 617–630. https://doi.org/10.1680/macr.11.0009110.1680/macr.11.00091 ↗

17. Japan Society of Civil Engineers. (1984). Method of Test for Flexural Strength and Flexural Toughness of Fiber Reinforced Concrete (Standard SF-4). Concrete Library of JSCE, No. 3, pp. 58–66.

18. Johnston, C. D. (1990). Methods of evaluating the performance of fibre-reinforced concrete. MRS Online Proceedings Library, 211(1), 15–24. https://doi.org/10.1557/PROC-211-1510.1557/PROC-211-15 ↗

19. Mujalli, M., Dirar, S., Mushtaha, E., Hussien, A., & Maksoud, A. (2022). Evaluation of the tensile characteristics and bond behaviour of steel fibre-reinforced concrete: An overview. Fibers, 10(12), Article 104. https://doi.org/10.3390/fib1012010410.3390/fib10120104 ↗

20. Qi, J., Wu, Z., Mia, Z. J., & Wang, J. (2018). Pullout behavior of straight and hooked-end steel fibres in UHPC matrix with various embedded angles. Construction and Building Materials, 191, 764–774. https://doi.org/10.1016/j.conbuildmat.2018.10.06710.1016/j.conbuildmat.2018.10.067 ↗

21. Shannag, M. J., Brincker, R., & Hansen, W. (1997). Pullout behavior of steel fibres from cement-based composites. Cement and Concrete Research, 27(6), 925–936. https://doi.org/10.1016/S0008-8846(97)00061-610.1016/S0008-8846(97)00061-6 ↗

22. Sharaky, I., Torres, L., Baena, M., & Miàs, C. (2013). An experimental study of different factors affecting the bond of NSM FRP bars in concrete. Composite Structures, 99, 350–365. https://doi.org/10.1016/j.compstruct.2012.12.01410.1016/j.compstruct.2012.12.014 ↗

23. Soulioti, D. V., Barkoula, N. M., Paipetis, A., & Matikas, T. E. (2011). Effects of fibre geometry and volume fraction on the flexural behaviour of steel-fibre-reinforced concrete. Strain, 47(s1), e535–e541. https://doi.org/10.1111/j.1475-1305.2009.00652.x10.1111/j.1475-1305.2009.00652.x ↗

24. Torgal, F. P. (2013). Eco-efficient concrete. Woodhead Publishing.10.1533/9780857098993 ↗

25. Trottier, J. F., & Banthia, N. (1994). Toughness characterization of steel‐fibre reinforced concrete. Journal of Materials in Civil Engineering, 6(2), 264–289. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:2(264)10.1061/(ASCE)0899-1561(1994)6:2(264) ↗

26. Valcuende, M., & Parra, C. (2009). Bond behaviour of reinforcement in self-compacting concretes. Construction and Building Materials, 23(1), 162–170. https://doi.org/10.1016/j.conbuildmat.2008.01.00710.1016/j.conbuildmat.2008.01.007 ↗

27. Yoo, D., Choi, H., & Kim, S. (2019). Bond-slip response of novel half-hooked steel fibres in ultra-high-performance concrete. Construction and Building Materials, 224, 743–761. https://doi.org/10.1016/j.conbuildmat.2019.07.09910.1016/j.conbuildmat.2019.07.099 ↗

28. Yoo, D., Park, J., & Kim, S. (2017). Fibre pullout behavior of HPFRCC: Effects of matrix strength and fibre type. Composite Structures, 174, 263–276. https://doi.org/10.1016/j.compstruct.2017.04.06410.1016/j.compstruct.2017.04.064 ↗

29. Yuan, C., Chen, W., Pham, T. M., & Hao, H. (2019). Effect of aggregate size on bond behaviour between basalt fibre-reinforced polymer sheets and concrete. Composites Part b, Engineering, 158, 459–474. https://doi.org/10.1016/j.compositesb.2018.09.08910.1016/j.compositesb.2018.09.089 ↗

30. Zhang, H., Ji, T., & Lin, X. (2019). Pullout behavior of steel fibres with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing conditions. Construction and Building Materials, 211, 688–702. https://doi.org/10.1016/j.conbuildmat.2019.03.27410.1016/j.conbuildmat.2019.03.274 ↗

31. Zīle, E., & Zīle, O. (2013). Effect of the fibre geometry on the pullout response of mechanically deformed steel fibres. Cement and Concrete Research, 44, 18–24. https://doi.org/10.1016/j.cemconres.2012.10.01410.1016/j.cemconres.2012.10.014 ↗