journal article·2021-12Open access

Utilization of Recycled Aggregate Concrete for Marine Site Based on 7-Year Field Monitoring

Wichian Chalee, Tieng Cheewaket, Chai Jaturapitakkul

Abstract

Abstract This research aimed to create value of construction and demolition waste to be able used as a recycled coarse aggregate (RCA) in durable concrete, based on 7-year field investigation in marine site. Fly ash was used to substitute Portland cement type I in RCA concrete varied from 0 to 50% by weight of binder with three W/B ratios and comparing to natural aggregate (NA) concrete. Cubical concrete specimens were cast having round steel bars embedded with various concrete coverings to evaluate the durability performances. After 28-day curing, the specimens were placed at a tidal zone in the gulf of Thailand and investigated both mechanical and durability performances at 7-year exposed period. Based on site monitoring, 15–25% fly ash RCA concrete with W/B ratio of 0.40 would be advantaged to resist destruction due to the marine attack when compared with NA concrete with the same water-to-binder ratio.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. ACI 201.2R-16. (2016). Guide to durable concrete. ACI Committee 201, American Concrete Institute, Farmington Hills, ISBN: 9781945487392.
2. ASTM C1152 / C1152M-04. (2012). Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete, ASTM International, West Conshohocken, PA, www.astm.org.
3. ASTM C618–19. (2019). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, www.astm.org.
4. Chalee, W., Ausapanit, P., & Jaturapitakkul, C. (2010). Utilization of fly ash concrete in marine environment for long term design life analysis. Materials & Design, 31, 1242–1249.10.1016/j.matdes.2009.09.024 ↗
5. Cheewaket, T., Jaturapitakkul, C., & Chalee, W. (2014). Concrete durability presented by acceptable chloride level and chloride diffusion coefficient in concrete: 10-year results in marine site. Materials and Structures, 47, 1501–1511.10.1617/s11527-013-0131-4 ↗
6. Choi, H., Choi, H., Lim, M., Inoue, M., Kitagaki, R., & Noguchi, T. (2016). Evaluation on the mechanical performance of low-quality recycled aggregate through interface enhancement between cement matrix and coarse aggregate by surface modification technology. International Journal of Concrete Structures and Materials, 10(1), 87–97.10.1007/s40069-015-0124-5 ↗
7. Gbozee, M., Zheng, K., He, F., & Zeng, X. (2018). The influence of aluminum from metakaolin on chemical binding of chloride ions in hydrated cement pastes. Applied Clay Science, 158, 186–194.10.1016/j.clay.2018.03.038 ↗
8. Githachuri, K., Alexander, M., & Moyo, P. (2012). Durability performance of a range of marine concretes and the applicability of the South African Service Life Prediction Model. Materials and Structures, 45, 185–198.10.1617/s11527-011-9759-0 ↗
9. Gopalakrishnan, R., & Chinnaraju, K. (2019). Durability of ambient cured alumina silicate concrete based on slag/fly ash blends against sulfate environment. Construction and Building Materials, 204, 70–83.10.1016/j.conbuildmat.2019.01.153 ↗
10. Jiang, P., Jiang, L., Zha, J., & Song, Z. (2017). Influence of temperature history on chloride diffusion in high volume fly ash concrete. Construction and Building Materials, 144, 677–685.10.1016/j.conbuildmat.2017.03.225 ↗
11. Lei, B., Li, W., Tang, Z., Li, Z., & Tam, V. W. Y. (2020). Effects of environmental actions, recycled aggregate quality and modification treatments on durability performance of recycled concrete. Journal of Materials Research and Technology, 9(6), 13375–13389.10.1016/j.jmrt.2020.09.073 ↗
12. Lei, B., Li, W., Luo, Z., Li, X., Tam, V. W. Y., & Tang, Z. (2021). Performance deterioration of sustainable recycled aggregate concrete under combined cyclic loading and environmental actions. Journal of Sustainable Cement-Based Materials, 10(1), 23–45.10.1080/21650373.2020.1767722 ↗
13. Liu, J., Ou, G., Qiu, Q., Chen, X., Hong, J., & Xing, F. (2017). Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition. Construction and Building Materials, 146, 493–501.10.1016/j.conbuildmat.2017.04.018 ↗
14. Lopez-Calvo, H. Z., Montes-García, P., Jiménez-Quero, V. G., Gómez-Barranco, H., Bremner, T. W., & Thomas, M. D. A. (2018). Influence of crack width, cover depth and concrete quality on corrosion of steel in HPC containing corrosion inhibiting admixtures and fly ash. Cement and Concrete Composites, 88, 200–210.10.1016/j.cemconcomp.2018.01.016 ↗
15. McCarthy, M. J., Tittle, P. A. J., & Dhir, R. K. (2019). Corrosion of reinforcement in concrete containing wet-stored fly ash. Cement and Concrete Composites, 102, 71–83.10.1016/j.cemconcomp.2019.03.003 ↗
16. Medeiros, M. H. F., Gobbi, A., Reus, G. C., & Helene, P. (2013). Reinforced concrete in marine environment: Effect of wetting and drying cycles, height and positioning in relation to the sea shore. Construction and Building Materials, 44, 452–457.10.1016/j.conbuildmat.2013.02.078 ↗
17. Moffatt, E. G., Thomas, M. D. A., & Fahim, A. (2018). Performance of high-volume fly ash concrete in marine environment. Cement and Concrete Research, 113, 65–73.10.1016/j.cemconres.2018.07.004 ↗
18. Oslakovic, I. S., Bjegovic, D., & Mikulic, D. (2010). Evaluation of service life design models on concrete structures exposed to marine environment. Materials and Structures, 43, 1397–1412.10.1617/s11527-010-9590-z ↗
19. Qu, F., Li, W., Dong, W., Tam, V. W. Y., & Yu, T. (2021). Durability deterioration of concrete under marine environment from material to structure: A critical review. Journal of Building Engineering, 35, 102074.10.1016/j.jobe.2020.102074 ↗
20. Rattanashotinunt, C., Tangchirapat, W., Jaturapitakkul, W., Cheewaket, T., & Chindaprasirt, P. (2018). Investigation on the strength, chloride migration, and water permeability of eco-friendly concretes from industrial by-product materials. Journal of Cleaner Production, 172, 1691–1698.10.1016/j.jclepro.2017.12.044 ↗
21. Rukzon, S., & Chindaprasirt, P. (2009). Pore structure changes of blended cement pastes containing fly ash, rice husk ash, and palm oil fuel ash caused by carbonation. Journal of Materials in Civil Engineering, 16, 666–671.
22. Shen, X., Liu, O., Hu, Z., Jiang, W., Lin, X., & Hao, D. (2019). Combine ingress of chloride and carbonation in marine-exposed concrete under unsaturated environment: A numerical study. Ocean Engineering, 189, 106350.10.1016/j.oceaneng.2019.106350 ↗
23. Somna, S., & Jaturapitakkul, C. (2012). Effect of ground fly ash and ground bagasse ash on the durability of recycled aggregate concrete. Cement and Concrete Composites, 34, 848–854.10.1016/j.cemconcomp.2012.03.003 ↗
24. Somna, R., Jaturapitakkul, C., Rattanachu, P., & Chalee, W. (2012a). Effect of ground bagasse ash on mechanical and durability properties of recycled aggregate concrete. Materials & Design, 36, 597–603.10.1016/j.matdes.2011.11.065 ↗
25. Somna, R., Jaturapitakkul, C., Chalee, W., & Rattanachu, P. (2012b). Effect of W/B ratio and ground fly ash on properties of recycled aggregate concrete. Journal of Materials in Civil Engineering, 24, 16–22.10.1061/(ASCE)MT.1943-5533.0000360 ↗
26. Tang, Z., Li, W., Ke, G., Zhou, J. L., & Tam, V. W. Y. (2017). Sulfate attack resistance of sustainable concrete incorporating various industrial solid wastes. Journal of Cleaner Production, 218, 810–822.10.1016/j.jclepro.2019.01.337 ↗
27. Tangchirapat, W., Khamklai, S., & Jaturapitakkul, C. (2012). Use of ground palm oil fuel ash to improve strength, sulfate resistance, and water permeability of concrete containing high amount of recycled concrete aggregates. Materials & Design, 41, 150–157.10.1016/j.matdes.2012.04.054 ↗
28. Wang, Y., Shui, Z., Gao, X., Yu, R., Huang, Y., & Cheng, S. (2019). Understanding the chloride binding and diffusion behaviours of marine concrete based on Portland limestone cement-alumina enriched pozzolans. Construction and Building Materials, 198, 207–217.10.1016/j.conbuildmat.2018.11.270 ↗
29. Wang, Y., Tan, Y., Wang, Y., & Liu, C. (2020). Mechanical properties and chloride permeability of green concrete mixed with fly ash and coal gangue. Construction and Building Materials, 233, 117166.10.1016/j.conbuildmat.2019.117166 ↗
30. Yehia, S., Helal, K., Abusharkh, A., Zaher, A., & Istaitiyeh, H. (2015). Strength and durability evaluation of recycled aggregate concrete. International Journal of Concrete Structures and Materials, 9(2), 219–239.10.1007/s40069-015-0100-0 ↗
31. Ying, J., Xiao, J., & Meng, Q. (2016). On probability distribution of chloride diffusion coefficient for recycled aggregate concrete. International Journal of Concrete Structures and Materials, 10(1), 61–73.10.1007/s40069-015-0123-6 ↗
32. Yu, Y., Yu, J., & Ge, Y. (2016). Water and chloride permeability research on ordinary cement mortar and concrete with compound admixture and fly ash. Construction and Building Materials, 127, 556–564.10.1016/j.conbuildmat.2016.09.103 ↗