Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC
Source abstract
Abstract
Twenty-seven large-scale beams with dapped-end have been prepared, cast and tested to failure in the three points loading arrangement. One control beam has been designed in accordance with requirement of standard code while the dapped-end reinforcement scheme of other beams has been derived from the control beam. In selected beams, engineered cementitious composites (ECC) has been utilized in the dapped-end region. The test results exhibited that DR is more appropriate and higher capacity than HR in resisting the shear force. In addition, the reinforced engineered cementitious composites dapped-end beams (R-ECC-DEB) showed higher structural performance compared to the normal reinforced concrete dapped-end beams (RC-DEBs). The strength of ECC also has direct effect on the failure capacity of the R-ECC-DEB, in which higher strength of ECC leads to higher failure capacity of R-ECC-DEB.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A. Committee and I. O. f. Standardization. (2008). Building code requirements for structural concrete (ACI 318-08) and commentary.
2. Ahmad, S., Elahi, A., Hafeez, J., Fawad, M., & Ahsan, Z. (2013). Evaluation of the shear strength of dapped ended beam. Life Science Journal, 10, 1038–1044.
3. Aswin, M., Mohammed, B. S., Liew, M., & Imam, Z. S.. (2015a). Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10(22), 42927–42933.
4. Aswin, M., Mohammed, B. S., Liew, M., & Syed, Z. I. (2015b). Shear failure of RC dapped-end beams. Advances in Materials science and engineering, 2015, 309135.10.1155/2015/309135 ↗
5. Botros, A. W., Klein, G. J., Lucier, G. W., Rizkalla, S. H., & Zia, P. (2017). Dapped ends of prestressed concrete thin-stemmed members: Part 1, experimental testing and behavior. PCI Journal, 62, 61–82.10.15554/pcij62.2-05 ↗
6. Desnerck, P., Lees, J. M., & Morley, C. T. (2016). Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints. Engineering Structures, 127, 227–239.10.1016/j.engstruct.2016.08.061 ↗
7. Forsyth, M. B. (2013). Behavior of prestressed, precast concrete thin-stemmed members with dapped ends. Raleigh: North Carolina State University.
8. Fu, Z. (2004). Use of fibres and headed bars in dapped end beams. Montreal: McGill University Libraries.
9. Fukuyama, H., Sato, Y., Li, V. C., Matsuzaki, Y., & Mihashi, H. (2000). Ductile engineered cementitious composite elements for seismic structural applications. In CD Proceedings of the 12 WCEE, Paper, 1672.
10. Herzinger, R. (2008). Stud reinforcement in dapped ends of concrete beams. Ottawa: Library and Archives Canada.
11. Herzinger, R., & Elbadry, M. (2007). Alternative reinforcing details in dapped ends of precast concrete bridge girders: experimental investigation. Transportation Research Record: Journal of the Transportation Research Board. https://doi.org/10.3141/2028-13 .10.3141/2028-13 ↗
12. Huang, P.-C. (2000). Dapped-end strengthening of precast prestressed concrete double tee beams with FRP composites. Advances in Structural Engineering, 9(2), 293–308.10.1260/136943306776987010 ↗
13. Huang, P.-C., & Nanni, A. (2006). Dapped-end strengthening of full-scale prestressed double tee beams with FRP composites. Advances in Structural Engineering, 9, 293–308.10.1260/136943306776987010 ↗
14. Lepech, M. D., & Li, V. C. (2008). Large-scale processing of engineered cementitious composites. ACI Materials Journal, 105, 358.
15. Li, V. C. (1993). From micromechanics to structural engineering-the design of cementitous composites for civil engineering applications. JSCE Journal of Structural Mechanics and Earthquake Engineering, 10(2), 37–48.
16. Li, V. C. (2008). Engineered cementitious composites (ECC) material, structural, and durability performance, Chapter 24. In E. Nawy (Ed.), Concrete construction engineering handbook. CRC Press.10.1201/9781420007657.ch24 ↗
17. Lu, W. Y., Lin, I. J., Hwang, S. J., & Lin, Y. H. (2003). Shear strength of high-strength concrete dapped-end beams. Journal of the Chinese Institute of Engineers, 26, 671–680.10.1080/02533839.2003.9670820 ↗
18. Mattock, A. H. (2012). Strut-and-tie models of dapped-end beams. Concrete International, 34(2), 35–40.
19. Mattock, A. H., & Chan, T. C. (1979). Design and behavior of dapped-end beams. PCI Journal, 24, 28–45.10.15554/pcij.11011979.28.45 ↗
20. Mattock, A. H., & Theryo, T. S. (1986). Strength of precast prestressed concrete members with dapped ends. PCI Journal, 31(5), 58–75.10.15554/pcij.09011986.58.75 ↗
21. Mohamed, R., & Elliott, K. (2008). Shear strength of short recess precast dapped end beams made of steel fibre self-compacting concrete. In 33rd Conference on Our World in Concrete & Structures, Singapore Concrete Institute.
22. Mohammed, S. D., & Mahmoud, T. K. (2015). Strength enhancement of prestressed concrete dapped-end girders. Journal of Engineering, 21, 1–16.10.31026/j.eng.2015.10.01 ↗
23. Moreno-Martínez, J. Y., & Meli, R. (2014). Experimental study on the structural behavior of concrete dapped-end beams. Engineering Structures, 75, 152–163.10.1016/j.engstruct.2014.05.051 ↗
24. Nagrodzka-Godycka, K., & Piotrkowski, P. (2012). Experimental study of dapped-end beams subjected to inclined load. ACI Structural Journal, 109(1), 11–20.
25. Nagy-György, T., Sas, G., Dăescu, A., Barros, J. A., & Stoian, V. (2012). Experimental and numerical assessment of the effectiveness of FRP-based strengthening configurations for dapped-end RC beams. Engineering Structures, 44, 291–303.10.1016/j.engstruct.2012.06.006 ↗
26. P. D. Handbook. (2010). Precast. Prestressed Concrete Institute, 2010.
27. Peng, T. (2009). Influence of deta of dapped. Montreal: McGill University Montréal.
28. S.-C. C. E. P. Group. (2005). The European guidelines for self-compacting concrete: Specification, production and use. Brussels: International Bureau for Precast Concrete (BIBM).
29. Schlaich, J., & Schafer, K. (1991). Design and detailing of structural concrete using strut-and-tie models. Structural Engineer, 69, 113–125.
30. Taher, S.-D. (2005). Strengthening of critically designed girders with dapped ends. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 158, 141–152.10.1680/stbu.2005.158.2.141 ↗
31. Wang, Q., Guo, Z., & Hoogenboom, P. C. (2005). Experimental investigation on the shear capacity of RC dapped end beams and design recommendations. Structural Engineering and Mechanics, 21, 221.10.12989/sem.2005.21.2.221 ↗