Seismic Capacity Design and Retrofit of Reinforced Concrete Staggered Wall Structures
Source abstract
Abstract
This study investigates the seismic performance of a staggered wall structure designed with conventional strength based design, and compares it with the performance of the structure designed by capacity design procedure which ensures strong column-weak beam concept. Then the seismic reinforcement schemes such as addition of interior columns or insertion of rotational friction dampers at the ends of connecting beams are validated by comparing their seismic performances with those of the standard model structure. Fragility analysis shows that the probability to reach the dynamic instability is highest in the strength designed structure and is lowest in the structure with friction dampers. It is also observed that, at least for the specific model structures considered in this study, R factor of 5.0 can be used in the seismic design of staggered wall structures with proposed retrofit schemes, while R factor of 3.0 may be reasonable for standard staggered wall structures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Seismic Performance and Analysis · Structural Behavior of Reinforced Concrete · Seismic and Structural Analysis of Tall Buildings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. ACI 318. (2014). Building code requirements for structural concrete (318-14) and commentary. Farmington Hills, MI: American Concrete Institute.
2. AISC. (2010). Seismic provisions for structural steel buildings, AISC 341-10. Chicago: American Institute of Steel Construction.
3. ASCE 41-13. (2013). Seismic Rehabilitation of Existing Buildings. Reston: American Society of Civil Engineers.
4. ASCE 7-13. (2013). Minimum design loads for buildings and other structures. Reston: American Society of Civil Engineers.10.1061/9780784412916 ↗
5. ATC-19. (1995). Structural response modification factors. Redwood City, CA: Applied Technology Council.
6. Chao, S.-H., & Goel, S. C. (2006). Performance-Based Plastic Design of Seismic Resistant Special Truss Moment Frames. Report No. UMCEE 06-03. Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI.
7. Chung, H., Moon, B., Lee, S., Park, J., & Min, K. (2009). Seismic performance of friction dampers using flexure of RC shear wall system. The Structural Design of Tall and Special Buildings, 18, 807–822.10.1002/tal.524 ↗
8. Cornell, C. A., Jalayer, F., Hamburger, R. O., & Foutch, D. A. (2002). The probabilistic basis for the 2000 SAC/FEMA steel moment frame guidelines. ASCE Journal of Structural Engineering, 128(4), 526–533.10.1061/(ASCE)0733-9445(2002)128:4(526) ↗
9. FEMA P695. (2009). Quantification of building seismic performance factors. Washington, DC: Federal Emergency Management Agency.
10. Fintel, M. (1968). Staggered transverse wall beams for multistory concrete buildings. ACI Journal, 65(5), 366–378.
11. HAZUS-MH 2.1. (2010). Technical Manual Washington. Washington, DC: Federal Emergency Management Agency.
12. Kang, J., Yoon, H., Kim, W., Kodur, V., Shin, Y., & Kim, H. (2016). Effect of wall thickness on thermal behaviors of RC walls under fire conditions. International Journal of Concrete Structures and Materials, 10, 19–31.10.1007/s40069-016-0164-5 ↗
13. Kim, D. K. (2016). Seismic response analysis of reinforced concrete wall structure using macro model international journal of concrete. Structures and Materials, 10(1), 99–112.
14. Kim, J., & Baek, D. (2013). Seismic risk assessment of staggered wall system structures. Earthquake and Structures, 5, 607–624.10.12989/eas.2013.5.5.607 ↗
15. Kim, J., Jun, Y., & Kang, H. (2016). Seismic behavior factors of RC staggered wall buildings. International Journal of Concrete Structures and Materials, 10(3), 355–371.10.1007/s40069-016-0142-y ↗
16. Kim, J., & Kim, S. (2017). Performance-based seismic design of staggered truss frames with friction dampers. Thin-Walled Structures, 111, 197–209.10.1016/j.tws.2016.12.001 ↗
17. Kim, J., & Lee, M. (2014). Fundamental period formulae for RC staggered wall buildings. Magazine of Concrete Research, 66(7), 325–338.10.1680/macr.13.00253 ↗
18. Kim, J., Lee, J., & Kim, B. (2015). Seismic retrofit schemes for staggered truss structures. Engineering Structures, 102(1), 93–107.10.1016/j.engstruct.2015.08.006 ↗
19. Lee, J., & Kim, J. (2013). Seismic performance evaluation of staggered wall structures using FEMA P695 procedure. Magazine of Concrete Research, 65(17), 1023–1033.10.1680/macr.12.00237 ↗
20. Lee, J., & Kim, J. (2015). Seismic response modification factors of reinforced concrete staggered wall structures. Magazine of Concrete Research, 67(20), 1070–1083.10.1680/macr.14.00036 ↗
21. MacKay-Lyons, R. (2013). Performance-based design of RC coupled wall high-rise buildings with viscoelastic coupling dampers. Master’s thesis, Department of Civil Engineering, University of Toronto.
22. Madsen, L. P. B., Thambiratnam, D. P., & Perera, N. J. (2003). Seismic response of building structures with dampers in shear walls. Computers & Structures, 81(4), 239–253.10.1016/S0045-7949(02)00441-8 ↗
23. Mao, C. X., Wang, Z. Y., Zhang, L. Q., & Li, H. (2012). Seismic performance of RC frame-shear wall structure with novel shape memory alloy dampers in coupling beams. In 15th World congress of earthquake engineering (15 WCEE), Lisbon, Portugal.
24. Mee, A. L., Jordaan, I. J., & Ward, M. A. (1975). Dynamic response of a staggered wall-beam structure. Earthquake Engineering and Structural Dynamics, 3(4), 353–364.10.1002/eqe.4290030406 ↗
25. Morgen, B. G., & Kurama, Y. C. (2008). Seismic response evaluation of posttensioned precast concrete frames with friction dampers. Journal of Structural Engineering, 134(1), 132–145.10.1061/(ASCE)0733-9445(2008)134:1(132) ↗
26. Mualla, I. H., Jakupsson, E. D., & Nielsen, L. O. (2010). Structural behavior of 5000 kN damper. In European conference on earthquake engineering, ECEE, Ohrid, Macedonia.
27. PEER, NGA Database. (2006). Pacific Earthquake Engineering Research Center, University of California, Berkeley. http://peer.berkeley.edu/nga .
28. Pant, D. R., Montgomery, M., Berahman, F., & Christopoulos, C. (2015). Resilient seismic design of tall coupled shear wall buildings using viscoelastic coupling dampers. In 11th Canadian conference on earthquake engineering (11CCEE), Victoria, Canada.
29. Paulay, T., & Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry building. New York: Wiley.10.1002/9780470172841 ↗
30. PERFORM-3D. (2006). Nonlinear analysis and performance assessment for 3D structures-user guide. Berkeley, CA, USA: Computers and Structures.
31. Vamvatsikos, D., & Cornell, C. A. (2002). Incremental dynamic analysis. Earthquake Engineering and Structural Dynamics, 31(3), 491–514.10.1002/eqe.141 ↗
32. Wallace, J. W. (2012). Behavior, design, and modeling of structural walls and coupling beams—Lessons from recent laboratory tests and earthquakes. International Journal of Concrete Structures and Materials, 6(1), 3–18.10.1007/s40069-012-0001-4 ↗