Research on Modified High-Performance Cement Mortar of Prefabricated Buildings Based on Orthogonal Test
Source abstract
Abstract
Abstract In order to improve the construction technology level of the connection nodes of prefabricated buildings and improve the mechanical properties, fluidity and economy of the connection mortar, this paper adopts the orthogonal experimental design to improve the cement mortar by adding polymer dispersible polymer powder. A modified high-performance mortar with 1d compressive strength of 11Mpa, 3d compressive strength of 19Mpa, 7d compressive strength of 26Mpa, fluidity of 102 mm and final compressive strength higher than M25 was studied. The factors and levels of the orthogonal test are: mortar ratio 1:3,1:4,1:5; silica powder content of 4%,6%,8%; dispersible polymer powder content of 3%,5%,7%. After research, the optimal mixing ratio of modified high-performance mortar is 1:3, the content of silicon powder is 6%, the content of redispersible latex powder is 3%, the content of early strength water reducing agent is 0.1%, and the content of defoamer is 0.5%. The new modified high-performance cement mortar is characterized by short setting time and high early strength, which provides a new idea for the connecting materials of prefabricated buildings, which is of great significance for improving the integrity of prefabricated buildings and the durability of the connection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Bhanja, S., & Sengupta, B. (2003). Modified water–cement ratio law for silica fume concretes. Cement and Concrete Research, 33(3), 447–450.10.1016/S0008-8846(02)00977-8 ↗
2. Bhikshma, V., Nitturkar, K., & Venkatesham, Y. (2009). Investigations on mechanical properties of high strength silica fume concrete. Asian Journal of Civil Engineering, 10, 335–346.
3. Cai, Z. and Wang, Z. (1985). Application of orthogonal design in concrete, China Construction Industry Press.
4. Choi, J. Y., Joo, M.-K., & Lho, B. C. (2016). Effects of silica fume content and polymer-binder ratio on properties of ultrarapid-hardening polymer-modified mortars. International Journal of Concrete Structures and Materials, 10(2), 249–256.10.1007/s40069-016-0136-9 ↗
5. Do, Jeongyun and Kim, Dookie. (2008). Feasibility study on the utilization as repair grouting of high flowable polymer-modified cement mortar, adding high volume polyacrylic ester (PAE). Journal of Asian Architecture and Building Engineering, 7, 363–370.10.3130/jaabe.7.363 ↗
6. Huimei, Z. H. U., et al. (2014). Effects of two redispersible polymer powders on efflorescence of portland cement-based decorative mortar. Materials Science, 20, 345–350.
7. Ivanov, Y. P., & Roshavelov, T. T. (1993). Flow behaviour of modified cement pastes. Cement and Concrete Research, 23, 803–10.10.1016/0008-8846(93)90034-7 ↗
8. Jensen, O. M., & Hansen, P. F. (1995). Autogenous relative humidity change in silica fume-modified cement paste. Advances in Cement Research, 7, 33–38.10.1680/adcr.1995.7.25.33 ↗
9. JGJ/T 98. (2010). Specification for mix proportion design of masonry mortar.
10. Longxing J. (2016). Study on polymer modified rapid repair cement-based composites, MS thesis. Shijiazhuang Railway University.
11. Ming, X. (2017). Interpretation of technical standard for prefabricated concrete buildings. Standardization of Engineering Construction, 5, 21–22.
12. Mirza, J. et al. (1997). Evaluation of polymer-modified, cement-based mortars for replacing concrete structures in cold climates, Symposium Paper, pp.367–388.
13. Ohama, Y. (1999). Study on properties and mix proportioning of polymer-modified mortars for buildings, Japanese text ,pp. 4979–4979.
14. Ohama, Y. (2006). Recent trends in research and development of polymer-modified mortar and concrete in japan, Proceedings of the 5th Asian Symposium on Polymers in Concrete. Vol. 1.
15. Ohama, Y., Demura, K. (2010). Concrete-polymer composies-the past and future, Proceedings of the 13th International Congress on Polymers in concretes ,pp.1–13.
16. Y Ohama K Demura H Nagao T Ogi 1986 Adhesion of polymer-modified mortars to ordinary cement mortar by different test methods HR Sasse Eds Adhesion between polymers and concrete / Adhésion entre polymères et béton Springer Boston, MA 719 72910.1007/978-1-4899-3454-3_67 ↗
17. Rozenbaum, O., Pellenq, RJ-M., Damme Van, H. (2005). An experimental and mesoscopic lattice simulation study of styrene-butadiene latex-cement composites properties. Materials and Structures, 38, 467–478.10.1007/BF02482143 ↗
18. Sasse, H. R., & Fiebrich, M. (1983). Bonding of polymer materials to concrete. Rilem/Materiaux Et Constructions, 16(94), 293–301.10.1007/BF02473695 ↗
19. Schulze, Joachim. (1999). Influence of water-cement ratio and cement content on the properties of polymer-modified mortars. Cement and Concrete Research, 2, 909–915.10.1016/S0008-8846(99)00060-5 ↗
20. Si, HJ. et al. (2020). Modified PP fibers reinforced cement mortar. Advanced Materials Research, 146, 38–41.
21. Soroushian, P. et al. (1991). Latex-modified carbon fiber reinforced mortar,International Concrete Abstracts Portal,pp.11–18.
22. Wang, Ru., et al. (2013). Waterproof performance of polymer-modified cement mortar. Advanced Materials Research, 687, 213–218.10.4028/www.scientific.net/AMR.687.213 ↗
23. Wang, Bo. 2014. Study on Preparation and dynamic properties of polymer modified cement mortar, Beijing Architecture University.
24. Wang, Ru., et al. (2015). Study on waterproof mechanism of polymer-modified cement mortar. Magazine of Concrete Research, 67(18), 972–979.10.1680/macr.14.00294 ↗
25. Wang, Ru .et al.(2018).Environmental Temperature and Humidity Adaptability of Polymer-Modified Cement Mortar, International Congress on Polymers in Concrete (ICPIC 2018) ,pp.235–241.
26. Wang, Ru., Wang, P.-M., & Li, X.-G. (2005). Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars. Cement and Concrete Research, 35(5), 900–906.10.1016/j.cemconres.2004.07.012 ↗
27. Xiaoguo, Z. (2020). Study on the influence of sand cement ratio and particle size on the characteristics of cement mortar. Construction Technology, 49(2), 4.
28. Yun, K.-K., et al. (2002). Durability of latex-modified concrete with rapid-setting cement. International Journal of Highway Engineering, 4(2), 1–8.