Finite Element Investigation of the Flexural Performance of RC Beams with Various Dimensions Strengthened Using Prestressed CFRP Sheets
Source abstract
Abstract
Abstract In this study, numerical investigation of reinforced concrete (RC) beams strengthened with prestressed CFRP sheets is presented via the finite element (FE) analysis. Due to the high expenses of experimental tests, especially for large real-scale structures, numerical modeling could be an effective replacement. The main achievement of the present study is to give an insight into the flexural behavior of large RC beams retrofitted by prestressed CFRP sheets. The FE model is first verified by recently published experimental results and then implemented for the analysis of large-scale specimens, which are normally seen in RC structures. The effect of mesh size, width and length of CFRP sheets, ductility and stiffness, and the failure modes are investigated for 13 large specimens. Two recently developed reinforcement techniques, namely the externally bonded reinforcement (EBR) and externally bonded reinforcement on grooves (EBROG) will be probed for the specimens. Based on the results, prestressing the CFRP sheets attached via the EBROG technique considerably enhances the ultimate load, stiffness and ductility of the RC beam in flexure. Besides, it tends to the failure mechanism to the desirable mode of concrete face separation and spreads the cracks along the beam.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Abed, R. J., Mashrei, M. A., & Sultan, A. A. (2022). Flexural behavior of reinforced concrete beams strengthened by carbon fiber reinforced polymer using different strengthening techniques. Advances in Structural Engineering, 25, 355–373. https://doi.org/10.1177/1369433221104999210.1177/13694332211049992 ↗
2. ACI 318. (1994). Building code requirements for structural concrete and commentary. ACI Structural Journal., 552, 503.
3. Ahmad, A., Khan, Qu. Z., & Raza, A. (2020). Reliability analysis of strength models for CFRP-confined concrete cylinders. Composite Structures, 244, Article 112312. https://doi.org/10.1016/j.compstruct.2020.11231210.1016/j.compstruct.2020.112312 ↗
4. Aktas, M., & Sumer, Y. (2014). Nonlinear finite element analysis of damaged and strengthened reinforced concrete beams. Journal of Civil Engineering and Management, 20, 201–210. https://doi.org/10.3846/13923730.2013.80188910.3846/13923730.2013.801889 ↗
5. Al-Bayati, G., Al-Mohaidi, R., & Kalfat, R. (2016). Experimental investigation into the use of NSM FRP to increase the torsional resistance of RC beams using epoxy resins and cement-based adhesives. Construction and Building Materials, 124, 1153–1164. https://doi.org/10.1016/j.conbuildmat.2016.08.09510.1016/j.conbuildmat.2016.08.095 ↗
6. Bateniparvar, O., Afifi, D., Noormohammadi, N., & Boroomand, B. (2024). Enrichment terms for line singularities in second-order elliptic boundary value problems in 3D heterogeneous media: Application to heat conduction problems. Advances in Engineering Software, 194, Article 103683.10.1016/j.advengsoft.2024.103683 ↗
7. Bateniparvar, O., Noormohammadi, N., & Boroomand, B. (2020). Singular functions for heterogeneous composites with cracks and notches; The use of equilibrated singular basis functions. Computers and Mathematics with Applications, 79, 1461–1482. https://doi.org/10.1016/j.camwa.2019.09.00810.1016/j.camwa.2019.09.008 ↗
8. Belarbi, A., & Hsu, T. T. C. (1995). Constitutive laws of reinforced membrane elements with high strength concrete. ACI Structural Journal, 92, 562–573.
9. Bernardo, L. F. A., & Lopes, S. M. R. (2004). Neutral axis depth versus flexural ductility in high-strength concrete beam. Journal of Structural Engineering, 130, 452–459. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(452)10.1061/(ASCE)0733-9445(2004)130:3(452) ↗
10. Biscaia, H. C., Chastre, C., & Silva, M. A. G. (2013). A smeared crack analysis of reinforced concrete T-beams strengthened with GFRP composites. Engineering Structures, 56, 1346–1361. https://doi.org/10.1016/j.engstruct.2013.07.01010.1016/j.engstruct.2013.07.010 ↗
11. Codina, A., Barris, C., Jahani, Y., Baena, M., & Torres, L. (2024). Experimental and theoretical study on the flexural behaviour of RC beams strengthened with externally bonded reinforcement on grooves CFRP laminates. Engineering Structures, 299, Article 117091. https://doi.org/10.1016/j.engstruct.2023.11709110.1016/j.engstruct.2023.117091 ↗
12. de Borst, R., Remmers, J. J. C., Needleman, A., & Abellan, M. A. (2004). Discrete vs smeared crack models for concrete fracture: Bridging the gap. International Journal for Numerical and Analytical Methods in Geomechanics, 28, 583–607. https://doi.org/10.1002/nag.37410.1002/nag.374 ↗
13. El-Gamal, S., Al Mazroui, S., El Maghawri, S., & Al-Saidy, A. (2025). Enhancing the flexural capacity of reinforced concrete beams using glass fiber reinforced polymer bars and sheets. Structures, 77, Article 109156. https://doi.org/10.1016/j.istruc.2025.10915610.1016/j.istruc.2025.109156 ↗
14. Etse, G., Caggiano, A., & Vrech, S. (2012). Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model. International Journal of Fracture, 178, 131–146. https://doi.org/10.1007/s10704-012-9733-z10.1007/s10704-012-9733-z ↗
15. Fang, C., Mohamed Ali, M. S., & Sheikh, A. H. (2019). Experimental and numerical investigations on concrete filled carbon FRP tube (CFRP-CFFT) columns manufactured with ultra-high-performance fibre reinforced concrete. Composite Structures. https://doi.org/10.1016/j.compstruct.2020.11198210.1016/j.compstruct.2020.111982 ↗
16. Gao, P., Gu, X., & Mosallam, A. S. (2016). Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates. Composite Structures, 157, 33–50. https://doi.org/10.1016/j.compstruct.2016.08.01310.1016/j.compstruct.2016.08.013 ↗
17. Ghorbani, M., Noormohammadi, N., & Boroomand, B. (2024). Enrichment of the element free Galerkin method for cracks and notches without a priori knowledge of the analytical singularity order. Computers & Mathematics with Applications, 162, 155–179.10.1016/j.camwa.2024.03.007 ↗
18. Hashin, Z. (1980). Failure criteria for unidirectional fiber composites. Journal of Applied Mechanics, 47, 329–334.10.1115/1.3153664 ↗
19. Hashin, Z., & Rotem, A. (1973). A fatigue failure criterion for fiber reinforced materials. Journal of Composite Materials, 7, 448–464. https://doi.org/10.1177/00219983730070040410.1177/002199837300700404 ↗
20. Hawileh, R. A. (2015). Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcement. Materials & Design, 65, 831–839. https://doi.org/10.1016/j.matdes.2014.10.00410.1016/j.matdes.2014.10.004 ↗
21. Jawdhari, A., & Harik, I. (2018). Finite element analysis of RC beams strengthened in flexure with CFRP rod panels. Construction and Building Materials, 163, 751–766. https://doi.org/10.1016/j.conbuildmat.2017.12.13910.1016/j.conbuildmat.2017.12.139 ↗
22. Jumaa, G. B., & Yousif, A. R. (2019). Numerical modeling of size effect in shear strength of FRP reinforced concrete beams. Structures, 20, 237–254. https://doi.org/10.1016/j.istruc.2019.04.00810.1016/j.istruc.2019.04.008 ↗
23. Lu, X. Z., Teng, J. G., Ye, L. P., & Jiang, J. J. (2005). Bond – slip models for FRP sheets / plates bonded to concrete. Engineering Structures, 27, 920–937. https://doi.org/10.1016/j.engstruct.2005.01.01410.1016/j.engstruct.2005.01.014 ↗
24. Moshiri, N., Czaderski, C., Mostofinejad, D., & Motavalli, M. (2021). Bond resistance of prestressed CFRP strips attached to concrete by using EBR and EBROG strengthening methods. Construction and Building Materials, 266, Article 121209.10.1016/j.conbuildmat.2020.121209 ↗
25. Mostofinejad, D., & Moghaddas, A. (2014). Bond efficiency of EBR and EBROG methods in different flexural failure mechanisms of FRP strengthened RC beams. Construction and Building Materials, 54, 605–614. https://doi.org/10.1016/j.conbuildmat.2014.01.00210.1016/j.conbuildmat.2014.01.002 ↗
26. Mostofinejad, D., Shameli, S. M., & Hosseini, A. (2014). EBROG and EBRIG methods for strengthening of RC beams by FRP sheets. European Journal of Environmental and Civil Engineering, 18, 652–668. https://doi.org/10.1080/19648189.2014.90052310.1080/19648189.2014.900523 ↗
27. Nader Tehrani, B., Mostofinejad, D., & Hosseini, S. M. (2019). Experimental and analytical study on flexural strengthening of RC beams via prestressed EBROG CFRP plates. Engineering Structures, 197, Article 109395. https://doi.org/10.1016/j.engstruct.2019.10939510.1016/j.engstruct.2019.109395 ↗
28. Noormohammadi, N., Afifi, D., & Bateniparvar, O. (2023). A simple meshfree method based on Trefftz attitude for 2D and 3D elasticity problems. Engineering Analysis with Boundary Elements., 155, 1186–1206.10.1016/j.enganabound.2023.07.033 ↗
29. Noormohammadi, N., & Pirhaji Khouzani, N. (2024). A new formulation of the scaled boundary finite element method for heterogeneous media: Application to heat transfer problems. Acta Mechanica Solida Sinica, 37, 285–296.10.1007/s10338-023-00436-6 ↗
30. Obaidat, Y. T., Heyden, S., & Dahlblom, O. (2010). The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM. Composite Structures, 92, 1391–1398. https://doi.org/10.1016/j.compstruct.2009.11.00810.1016/j.compstruct.2009.11.008 ↗
31. Özkiliç, Y. O. (2020). A new replaceable fuse for moment resisting frames: Replaceable bolted reduced beam section connections. Steel and Composite Structures, 35, 353–370. https://doi.org/10.12989/scs.2020.35.3.35310.12989/scs.2020.35.3.353 ↗
32. Peng, G., Gu, X., & Mosallam, A. S. (2016). Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates. Composite Structures., 157, 33–50. https://doi.org/10.1016/j.compstruct.2016.08.01310.1016/j.compstruct.2016.08.013 ↗
33. Popovics, S. (1973). A numerical approach to the complete stress-strain curve of concrete. Cement and Concrete Research, 21, 1154–1157. https://doi.org/10.1016/0008-8846(73)90096-310.1016/0008-8846(73)90096-3 ↗
34. Pour, A. K., Karami, M., & Karakouzian, M. (2024). Enhancing flexural strength of RC beams with different steel-glass fiber-reinforced polymer composite laminate configurations: Experimental and analytical approach. Infrastructures, 9, 73. https://doi.org/10.3390/infrastructures904007310.3390/infrastructures9040073 ↗
35. Reddy, J. N. (2024). Computational methods in engineering: finite difference, finite volume, finite element, and dual mesh control domain methods. CRC Press.10.1201/9781003382812 ↗
36. Ren, W., Sneed, L. H., Yang, Y., & He, R. (2015). Numerical simulation of prestressed precast concrete bridge deck panels using damage plasticity model. International Journal of Concrete Structures and Materials, 9, 45–54. https://doi.org/10.1007/s40069-014-0091-210.1007/s40069-014-0091-2 ↗
37. Rimkus, A., Cervenka, V., Gribniak, V., & Cervenka, J. (2020). Uncertainty of the smeared crack model applied to RC beams. Engineering Fracture Mechanics, 233, Article 107088. https://doi.org/10.1016/j.engfracmech.2020.10708810.1016/j.engfracmech.2020.107088 ↗
38. "Sharif High Performance Center (Sharif HPC)", https://hpc.sharif.edu/, Accessed 10 July 2023
39. Shabani, E., Mostofinejad, D., & Saljoughian, A. (2023). Bond behavior of prestressed FRP sheet-concrete joints: Comparison of EBROG and EBR methods. Construction and Building Materials, 400, Article 132752.10.1016/j.conbuildmat.2023.132752 ↗
40. Sharifi Ghalehnoei, M., Javanmard, A., Izadifar, M., Ukrainczyk, N., & Koenders, E. (2023). Finite element analysis of shear reinforcing of reinforced concrete beams with carbon fiber reinforced polymer grid-strengthened engineering cementitious composite. Buildings. https://doi.org/10.3390/buildings1304103410.3390/buildings13041034 ↗
41. Simulia, D. ABAQUS 6.14 Analysis User’s Manual. Abaqus 6.14 Documentation; ABAUS M, Hibbitt, Karlsson and Sorensen, Inc. Providence, RI, USA, 2019.
42. Wang, H. T., Bian, Z. N., Xu, G. W., Chen, M. S., Xiong, H., & Liu, S. S. (2022b). Flexural strengthening of large-scale RC beams with nonprestressed and prestressed CFRP using different anchorages. Polymers, 14, 5498. https://doi.org/10.3390/polym1424549810.3390/polym14245498 ↗
43. Wang, H. T., Liu, S. S., Zhu, C. Y., Xiong, H., & Xu, G. W. (2022a). Experimental study on the flexural behavior of large-scale reinforced concrete beams strengthened with prestressed CFRP plates. Journal of Composites for Construction, 26, 04022076. https://doi.org/10.1061/(ASCE)CC.1943-5614.000126710.1061/(ASCE)CC.1943-5614.0001267 ↗
44. Wang, H. T., Wu, Q., Zhu, C. Y., Mao, Y. H., & Guo, C. C. (2024). An innovative prestressing system of prestressed carbon fiber sheets for strengthening RC beams under flexure. Construction and Building Materials, 411, Article 134409.10.1016/j.conbuildmat.2023.134409 ↗
45. Yang, J. Q., Feng, P., Liu, B., Wang, H., Zhao, W., & Hu, L. (2022). Strengthening RC beams with mid-span supporting prestressed CFRP plates: An experimental investigation. Engineering Structures, 272, Article 115022.10.1016/j.engstruct.2022.115022 ↗
46. Zolfaghari, S., Mostofinejad, D., Fantuzzi, N., Luciano, R., & Fabbrocino, F. (2023). Experimental evaluation of FRP-concrete bond using externally-bonded reinforcement on grooves (EBROG) method. Composite Structures, 310, Article 116693.10.1016/j.compstruct.2023.116693 ↗