Viscoelastic Properties of Fresh Cement Paste to Study the Flow Behavior
Source abstract
Abstract
During concrete pumping, the migration and redistribution of particles occur in a pipe and the lubrication layer that forms between the bulk concrete and the pipe wall is the governing factor determining the flow behavior. In order to identify flow behavior of pumping, in this study, the viscoelastic properties related to the microstructural behavior of a flocculated suspension were examined by using dynamic oscillatory measurements. Cement paste is assumed to be a constituent material of the lubrication layer and ten cases of mixing design are employed by changing the proportions of mineral admixtures. The relationship between the yield stress obtained from the steady shear test and the dynamic modulus resulted from the oscillatory shear measurement was derived and the implications of the correlation are discussed. Moreover, based on the investigation of the viscoelastic properties with oscillatory measurements, the initial behavior of pumped concrete was analyzed systematically.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Ahuja, S. K. (1980). Effect of carbon black on the rheological properties of styrene n-butyl methacrylate copolymer melt. In G. Astarita, G. Marrucci, & L. Nicolais (Eds.), Rheology (2nd ed., pp. 469–476). New York, NY: Springer.10.1007/978-1-4684-3743-0_87 ↗
2. Aleekseev, S. N. (1952). On the calculation of resistance in the pipes of concrete pumps. MekhanizatsiyaStroitel’stva, 9(1), 8–13.
3. Asakura, S., & Oosawa, F. (1958). Interaction between particles suspended in solutions of macromolecules. Journal of Polymer Science, 33, 183–192.10.1002/pol.1958.1203312618 ↗
4. Atzeni, C., Massidda, L., & Sanna, U. (1985). Comparision between rheological models for portland cement pastes. Cement and Concrete Research, 15, 511–519.10.1016/0008-8846(85)90125-5 ↗
5. Banfill, P. F. G., Kitching, D. R. (1990) Use of a Controlled Stress Rheometer to Study the Yield Stress of Oilwell Cement Slurries. In International Conference on Rheology of Fresh Cement and Concrete, University of Liverpool, March 27–29.10.1201/9781482288889-22 ↗
6. Browne, R., & Bamforth, P. (1977). Tests to establish concrete pumpability. Proceedings ACI Journal, 74(5), 193–203.
7. Choi, M. S., Kim, Y. J., & Kwon, S. H. (2013a). Prediction on pipe flow of pumped concrete based on shear-induced particle migration. Cement and Concrete Research, 52(10), 216–224.10.1016/j.cemconres.2013.07.004 ↗
8. Choi, M. S., Roussel, N., Kim, Y. J., & Kim, J. K. (2013b). Lubrication layer properties during concrete pumping. Cement and Concrete Research, 45(3), 69–78.10.1016/j.cemconres.2012.11.001 ↗
9. Chow, T. W., McIntire, L. V., Kunze, K. R., & Cooke, C. E. (1988). The rheological properties of cement slurries: Effects of vibration, hydration conditions, and additives. SPE Production Engineering, 3, 543–550.10.2118/13936-PA ↗
10. Cooke, C. E., Gonzalez, O. J., & Broussard, D. J. (1988). Primary cementing improvement by casing vibration during cement curing time. SPE Production Engineering, 3, 339–345.10.2118/14199-PA ↗
11. Davis, S. S. (1971a). Viscoelastic properties of pharmaceutical semisolids III: Nondestructive oscillatory testing. Journal of Pharmaceutical Sciences, 60, 1351–1355.10.1002/jps.2600600913 ↗
12. Davis, S. S. (1971b). Viscoelastic properties of pharmaceutical semisolids IV: Destructive oscillatory testing. Journal of Pharmaceutical Sciences, 60, 1356–1365.10.1002/jps.2600600914 ↗
13. Ferry, J. D. (1970). Viscoelastic properties of polymers (2nd ed.). New York: Wiley.
14. Feys, R., & Schutter, G. D. (2005). Pipe flow velocity profiles of complex suspensions, like concrete. Gent, Belgium: Gent University.
15. Figura, B. D., & Prud’homme, R. K. (2010). Hydrating cement pastes: Novel rheological measurement techniques of the acceleration of gelation. Journal of Rheology, 54, 1363–1378.10.1122/1.3494571 ↗
16. Franck, A. J. P. (1988). Rheological characterization of suspensions-comparison of steady and dynamic techniques. Uhlherr, 2, 327–329.
17. Gandhi, K., & Salovey, R. (1988). Dynamic mechanical behavior of polymers containing carbon black. Polymer Engineering & Science, 28, 877–887.10.1002/pen.760281402 ↗
18. Grzeszczyk, S., & Kucharska, L. (1988). The influence of alkalis on rheological properties of fresh cement pastes. Cement and Concrete Research, 18, 1–8.10.1016/0008-8846(88)90115-9 ↗
19. Heath, D., & Tadros, T. F. (1983). Rheological investigations of the effect of addition of free polymer to concentrated sterically stabilised polystyrene latex dispersions. Faraday Discussions of the Chemical Society, 76, 203–218.10.1039/dc9837600203 ↗
20. Ingber, M. S., Graham, A. L., Mondy, L. A., & Fang, Z. (2009). An improved constitutive model for concentrated suspensions accounting for shear-induced particle migration rate dependence on particle radius. Int. J. Multiphase Flow, 35, 270–276.10.1016/j.ijmultiphaseflow.2008.11.003 ↗
21. Jacobsen, S., Haugan, L., Hammer, T. A., & Kalogiannidis, E. (2009). Flow conditions of fresh mortar and concrete in different pipes. Cement and Concrete Research, 39(1), 997–1006.10.1016/j.cemconres.2009.07.005 ↗
22. Kaplan, D., Larrard, F. D., & Sedran, T. (2005). Design of concrete pumping circuit. ACI Materials Journal, 102(2), 110–117.
23. Keating, J., Hannant, D.J. (1990) The use of shear vane to measure the gel strength and dynamic yield strength of oil well cement slurries at high temperature and pressure. International Conference on Rheology of Fresh Cement and Concrete, University of Liverpool, March 27–29.
24. Lobe, V. M., & White, J. L. (1979). An experimental study of the influence of carbon black on the rheological properties of a polystyrene melt. Polymer Engineering & Science, 19, 617–624.10.1002/pen.760190905 ↗
25. Lu, G., Wang, K., & Rudolphi, T. J. (2008). Modeling rheological behavior of highly flowable mortar using concepts of particle and fluid mechanics. Cement and Concrete Composite, 30, 1–12.10.1016/j.cemconcomp.2007.06.002 ↗
26. Marin, G. (1988). Oscillatory rheometry. In A. A. Collyer & D. W. Clegg (Eds.), Rheological Measurement (pp. 297–343). London, UK: Elsevier.
27. Morinaga, S. (1973). Pumpability of concrete and pumping pressure in pipe line. Proceeding of a RILEM Seminar Held in Leeds, 3, 1–39.
28. Nguyen, Q. D., & Boger, D. V. (1992). Measuring the flow properties of yield stress fluids. Annual Review of Fluid Mechanics, 24, 47–88.10.1146/annurev.fl.24.010192.000403 ↗
29. Onogi, S., Matsumoto, T., & Warashina, Y. (1973). Rheological properties of dispersions of spherical particles in polymer solutions. Transactions. Society of Rheology, 17, 175–190.10.1122/1.549300 ↗
30. Papo, A. (1988). The thixotropic behavior of white portland cement pastes. Cement and Concrete Research, 18, 595–603.10.1016/0008-8846(88)90052-X ↗
31. Phillips, R. J., Armstrong, R. C., & Brown, R. A. (1992). A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration. Physics of Fluids, 4, 30–40.10.1063/1.858498 ↗
32. Rossig, M., & Frischbeton, F. V. (1974). Insbesondere von Leichtbeton, durch Rohrleitungen, 132, Dr.diss, RWTH. Opladen: Westdeutscher Verlag.10.1007/978-3-322-88261-5 ↗
33. Saaka, A. W., Jenningsa, H. M., & Shah, S. P. (2001). The influence of wall slip on yield stress and viscoelastic measurements of cement paste. Cement and Concrete Research, 31, 205–212.10.1016/S0008-8846(00)00440-3 ↗
34. Sakuta, M., Yamane, S., Kasami, H., & Sakamoto, A. (1979). Pumpability and rheological properties of fresh concrete. Proceeding of Conference on Quality Control of Concrete Structures, 2, 125–132.
35. Schultz, M. A., & Struble, L. J. (1993). Use of oscillatory shear to study flow behavior of fresh cement paste. Cement and Concrete Research, 23, 273–282.10.1016/0008-8846(93)90092-N ↗
36. Tattersall, G. H., & Banfill, E. E. G. (1983). The rheology of fresh concrete. London, UK: Pitman.
37. Vassiliev, V. (1953). Flow regime in a concrete pipe. Edition, 7, 42–44.
38. Weber, R. (1968). The transport of concrete by pipeline. London, UK: Cement and Concrete Association.
39. Xuequan, W., & Roy, D. M. (1984). Slag cement utilization: Rheological properties and related characterization. Cement and Concrete Research, 14, 521–528.10.1016/0008-8846(84)90128-5 ↗
40. Yang, M. C., Scriven, L. E., & Macosko, C. W. (1986). Some rheological measurements on magnetic iron oxide suspensions in silicon oil. Journal of Rheology, 30, 1015–1029.10.1122/1.549892 ↗