Elucidating the Behaviour of Hybrid Fibre-Reinforced Concrete Using Post-Consumer Carpet Fibres
Source abstract
Abstract
Carpet waste degrades slowly, posing an environmental burden. Incorporating this waste as fibre reinforcement in concrete helps to reduce accumulation and improve the properties of concrete. However, varying fibre characteristics and their interaction in blends are not well established. Hence, understanding hybrid fibre effects is crucial for construction adoption. This study evaluates the mechanical performance, shrinkage, microstructure, pore structure, and interfacial characteristics of hybrid carpet fibre-reinforced concrete. Four fibres, nylon, polypropylene (PP), polytrimethylene terephthalate (PTT), and polyester were analysed using grey relation analysis in six hybrid combinations with three mix ratios at a 0.3% volume fraction. At 28 days, flexural and splitting tensile strengths increased by 4–11% and 8–26%, respectively. All mixtures exhibited reduced shrinkage compared to the control. The nylon/PP 2:1 mix showed the best overall performance. Microstructural analysis revealed pore refinement, reduced porosity, and improved fibre–matrix bonding influenced by fibre hydrophilicity or hydrophobicity. Nanoindentation indicated hydrophilic fibres minimized the interfacial transition zone thickness. The findings indicate fibre combinations exhibit additive effects. This suggests performance can be predicted for blended fibre mixes, potentially allowing the design of mixes using fibre combinations to compensate for poorer performing fibres, enabling their reuse and avoiding landfill disposal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Azarfam, M. Y., Maheshwari, A., Blum, F. D., Chaudhari, S., Switzer, C., Vaidyanathan, R., Hanan, J. C., & Bandla, S. (2024). Recycled carpet-reinforced composites from post-consumer polypropylene carpet and recycled HDPE resin. Resources, Conservation and Recycling, 200, Article 107298. https://doi.org/10.1016/j.resconrec.2023.10729810.1016/j.resconrec.2023.107298 ↗
2. Bhalamurugan, R., & Prabhu, S. (2015). Performance characteristic analysis of automated robot spray painting using Taguchi method and gray relational analysis. Arabian Journal for Science and Engineering, 40, 1657–1667. https://doi.org/10.1007/s13369-015-1628-710.1007/s13369-015-1628-7 ↗
3. Blair, J., & Mataraarachchi, S. (2021). A review of landfills, waste and the nearly forgotten nexus with climate change. Environments, 8(8), Article 73. https://doi.org/10.3390/environments808007310.3390/environments8080073 ↗
4. Canbolat, A., Bademlioglu, A., Arslanoglu, N., & Kaynakli, O. (2019). Performance optimization of absorption refrigeration systems using Taguchi, ANOVA and Grey Relational Analysis methods. Journal of Cleaner Production, 229, 874–885. https://doi.org/10.1016/j.jclepro.2019.05.02010.1016/j.jclepro.2019.05.020 ↗
5. Gamage, N., Gunasekara, C., Law, D. W., Houshyar, S., Setunge, S., & Cwirzen, A. (2024). Enhancement of concrete performance and sustainability through incorporation of diverse waste carpet fibres. Construction and Building Materials, 445, Article 137921. https://doi.org/10.1016/j.conbuildmat.2024.13792110.1016/j.conbuildmat.2024.137921 ↗
6. Hsie, M., Tu, C., & Song, P. S. (2008). Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Materials Science & Engineering, A, 494(1), 153–157. https://doi.org/10.1016/j.msea.2008.05.03710.1016/j.msea.2008.05.037 ↗
7. Joe Pickin, C. W., Kyle O’Farrell, Lara Stovell, Piya Nyunt, Sabrina Guazzo, Yong Lin, Georgia Caggiati-Shortell, Poulomi Chakma, Carmen Edwards, Blake Lindley (Cirq Solutions), Geoff Latimer (Ascend Waste and Environment), Jenny Downes (BehaviourWorks), Isabel Axiö (RMCG). 2022. National Waste Report 2022.
8. Jozić, S., Bajić, D., & Celent, L. (2015). Application of compressed cold air cooling: Achieving multiple performance characteristics in end milling process. Journal of Cleaner Production, 100, 325–332. https://doi.org/10.1016/j.jclepro.2015.03.09510.1016/j.jclepro.2015.03.095 ↗
9. Li, Y., Liu, Y., Liu, A., Xu, C., Zhang, C., Yu, J., Yuan, R., & Li, F. (2025). Poly(trimethylene terephthalate-b-poly(trimethylene ether) glycol) copolymers: From bio-based thermoplastic elastomers to elastic fibers for apparel. European Polymer Journal, 225, Article 113706. https://doi.org/10.1016/j.eurpolymj.2024.11370610.1016/j.eurpolymj.2024.113706 ↗
10. Li, Z.-X., Li, C.-H., Shi, Y.-D., & Zhou, X.-J. (2017). Experimental investigation on mechanical properties of hybrid fibre reinforced concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2017.09.09810.1016/j.conbuildmat.2017.09.098 ↗
11. Liu, Y., Zhou, J., Zhao, T., Sun, H., Kang, T., Li, S., & Zhao, B. (2023). Bond behavior of recycled-fiber recycled concrete and reinforcement. Journal of Materials in Civil Engineering, 35(5), Article 04023093. https://doi.org/10.1061/JMCEE7.MTENG-1502710.1061/JMCEE7.MTENG-15027 ↗
12. Ma, J., Yuan, H., Zhang, J., & Zhang, P. (2024). Enhancing concrete performance: A comprehensive review of hybrid fiber reinforced concrete. Structures, 64, Article 106560. https://doi.org/10.1016/j.istruc.2024.10656010.1016/j.istruc.2024.106560 ↗
13. Mat-Shayuti, M., Abdullah, M., & Megat-Yusoff, P. (2013). Water absorption properties and morphology of polypropylene/polycarbonate/polypropylene-graft-maleic anhydride blends. Asian Journal of Scientific Research, 6(2), 167–176.10.3923/ajsr.2013.167.176 ↗
14. Mobasher, B., & Li, C. Y. (1996). Mechanical properties of hybrid cement-based composites. ACI Materials Journal, 93, 284–292.
15. Patrisia, Y., Gunasekara, C., Law, D. W., Loh, T., Nguyen, K. T. Q., & Setunge, S. (2024). Optimizing engineering potential in sustainable structural concrete brick utilizing pond ash and unwashed recycled glass sand integration. Case Studies in Construction Materials. https://doi.org/10.1016/j.cscm.2024.e0381610.1016/j.cscm.2024.e03816 ↗
16. Patrisia, Y., Gunasekara, C., Law, D. W., Setunge, S., & Kaminsky, B. (2025). Engineering and thermo-acoustic insulation performance of recycled waste concrete composites. Journal of Sustainable Cement-Based Materials. https://doi.org/10.1080/21650373.2025.253399610.1080/21650373.2025.2533996 ↗
17. Sadrolodabaee, P., Claramunt, J., Ardanuy, M., & de la Fuente, A. (2021a). Mechanical and durability characterization of a new textile waste micro-fiber reinforced cement composite for building applications. Case Studies in Construction Materials, 14, Article e00492. https://doi.org/10.1016/j.cscm.2021.e0049210.1016/j.cscm.2021.e00492 ↗
18. Sadrolodabaee, P., Claramunt, J., Ardanuy, M., & de la Fuente, A. (2021b). A textile waste fiber-reinforced cement composite: Comparison between short random fiber and textile reinforcement. Materials, 14(13), 3742.10.3390/ma14133742 ↗
19. Sadrolodabaee, P., Claramunt, J., Ardanuy, M., & de la Fuente, A. (2023). Effect of accelerated aging and silica fume addition on the mechanical and microstructural properties of hybrid textile waste-flax fabric-reinforced cement composites. Cement and Concrete Composites, 135, Article 104829. https://doi.org/10.1016/j.cemconcomp.2022.10482910.1016/j.cemconcomp.2022.104829 ↗
20. Sadrolodabaee, P., Claramunt, J., Ardanuy, M., & Fuente, A. (2021c). Characterization of a textile waste nonwoven fabric reinforced cement composite for non-structural building components. Construction and Building Materials, 276, Article 122179. https://doi.org/10.1016/j.conbuildmat.2020.12217910.1016/j.conbuildmat.2020.122179 ↗
21. Sadrolodabaee, P., de la Fuente, A., Ardanuy, M., & Claramunt, J. (2024). Mechanical performance of aged cement-based matrices reinforced with recycled aramid textile nonwoven fabric: Comparison with other FRCMs. Case Studies in Construction Materials, 20, Article e02994. https://doi.org/10.1016/j.cscm.2024.e0299410.1016/j.cscm.2024.e02994 ↗
22. Sankar, B., & Ramadoss, P. (2021). Review on fiber hybridization in ternary blended high-performance concrete. Materials Today: Proceedings, 45, 4919–4924. https://doi.org/10.1016/j.matpr.2021.01.36610.1016/j.matpr.2021.01.366 ↗
23. Sotayo, A., Green, S., & Turvey, G. (2015). Carpet recycling: A review of recycled carpets for structural composites. Environmental Technology & Innovation, 3, 97–107. https://doi.org/10.1016/j.eti.2015.02.00410.1016/j.eti.2015.02.004 ↗
24. Textile Industry. (2023). Retrieved 12/09/2025 from https://www.textileindustry.net/moisture-regain-and-moisture-content/?utm_source
25. Tran, N. P., Gunasekara, C., Law, D. W., Houshyar, S., & Setunge, S. (2022a). Microstructural characterisation of cementitious composite incorporating polymeric fibre: A comprehensive review. Construction and Building Materials, 335, Article 127497. https://doi.org/10.1016/j.conbuildmat.2022.12749710.1016/j.conbuildmat.2022.127497 ↗
26. Tran, N. P., Gunasekara, C., Law, D. W., Houshyar, S., & Setunge, S. (2022b). Upcycled polypropylene and polytrimethylene terephthalate carpet waste in reinforcing cementitious composites. ACI Material Journals. https://doi.org/10.14359/5173468810.14359/51734688 ↗
27. Tran, N. P., Gunasekara, C., Law, D. W., Houshyar, S., & Setunge, S. (2023a). Repurposing of blended fabric waste for sustainable cement-based composite: Mechanical and microstructural performance. Construction and Building Materials, 362, Article 129785.10.1016/j.conbuildmat.2022.129785 ↗
28. Tran, N. P., Gunasekara, C., Law, D. W., Houshyar, S., & Setunge, S. (2023b). Utilization of recycled fabric-waste fibers in cementitious composite. Journal of Materials in Civil Engineering, 35(1), Article 04022372.10.1061/(ASCE)MT.1943-5533.0004538 ↗
29. Tran, N. P., Gunasekara, C., Law, D. W., Houshyar, S., Setunge, S., & Cwirzen, A. (2022c). Comprehensive review on sustainable fiber reinforced concrete incorporating recycled textile waste. Journal of Sustainable Cement-Based Materials, 11(1), 28–42. https://doi.org/10.1080/21650373.2021.187527310.1080/21650373.2021.1875273 ↗
30. Vairagade, V. S., & Dhale, S. A. (2023). Hybrid fibre reinforced concrete – A state of the art review. Hybrid Advances, 3, Article 100035. https://doi.org/10.1016/j.hybadv.2023.10003510.1016/j.hybadv.2023.100035 ↗
31. Xu, L., Deng, F., & Chi, Y. (2017). Nano-mechanical behavior of the interfacial transition zone between steel-polypropylene fiber and cement paste. Construction and Building Materials, 145, 619–638. https://doi.org/10.1016/j.conbuildmat.2017.04.03510.1016/j.conbuildmat.2017.04.035 ↗
32. Zareei, S. A., Ameri, F., Bahrami, N., Shoaei, P., Musaeei, H. R., & Nurian, F. (2019). Green high strength concrete containing recycled waste ceramic aggregates and waste carpet fibers: Mechanical, durability, and microstructural properties. Journal of Building Engineering, 26, Article 100914. https://doi.org/10.1016/j.jobe.2019.10091410.1016/j.jobe.2019.100914 ↗
33. Zhu, C., Zhang, J., Peng, J., Cao, W., & Liu, J. (2018). Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers. Construction and Building Materials, 163, 695–705. https://doi.org/10.1016/j.conbuildmat.2017.12.16810.1016/j.conbuildmat.2017.12.168 ↗