Characteristics of Iron Ore Tailings Sand and Properties of Iron Ore Tailings Sand Concrete: A Review
Source abstract
Abstract
Abstract As a common industrial solid waste, iron ore tailing sand (IOTS) has a large amount of storage, and the treatment efficiency is unsatisfactory. Scientific and reasonable incorporation of IOTS waste into concrete is one of the critical ways to realize bulk utilization and sustainable development. This paper first summarizes the basic material characteristics of IOTS, and the similarities and differences between IOTS and natural sand (NS) are compared and analyzed. Followed with a presentation of research findings on properties of IOTS concrete with respect to mix ratio, workability, mechanical properties, drying shrinkage and durability. Subsequently, the mechanical behaviors of IOTS concrete members are analyzed and summarized in terms of experimental research, theoretical analysis and numerical simulation. Eventually, the future research directions of material and component levels of IOTS concrete are reasonably prospected. These conclusions may inform the sustainable technical application of IOTS in concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
References (100+)
Show source-provided references
1. ACI 363R. (1992) Report on High-Strength Concrete. American Concrete Institute, Farmington Hills, MI.
2. ACI 318. (2019) Building Code Requirements for Structural Concrete and Commentary. American Concrete Institute, Farmington Hills, MI.
3. Arbili, M. M., Alqurashi, M., Majdi, A., Ahmad, J., & Deifalla, A. F. (2022). Concrete made with iron ore tailings as a fine aggregate, a step towards sustainable concrete. Mater., 15(18), 6236. https://doi.org/10.3390/MA1518623610.3390/MA15186236 ↗
4. ASTM C33/C33M. Standard specification for concrete aggregates. ASTM International, West Conshohocken, PA, 2018.
5. Bhargav, M., Khadar, S. A. R. S. A. (2021) Characterization of fibre R.C beam made with partial replacement of sand with iron ore. Mater Today: Proc. 45 (P7): 6590–6595. https://doi.org/10.1016/J.MATPR.2020.11.76910.1016/J.MATPR.2020.11.769 ↗
6. Bian, L. B. (2008) The research of high-performance concrete with superfine tail mineral sand. Ready-Mixed Concr. 11–14.
7. Cao, C., Sun, W., & Qin, H. G. (2000). The analysis on strength and fly ash effect of roller-compacted concrete with high volume fly ash. Cement and Concrete Research, 30(01), 71–75. https://doi.org/10.1016/S0008-8846(99)00203-310.1016/S0008-8846(99)00203-3 ↗
8. Cao, C. H., Weng, W. S., Ma, C. Y., Sun, X. H., Guo, H. L., Pan, H. B., & Yang, N. (2019). Numerical simulation of shear behavior of pumice concrete beam with iron tailings sand. Journal of Hebei Institute of Architecture and Civil Engineering., 38(02), 6–13.
9. Cao, Y. (2021). Preparation and performance study of composite excited iron tailing powder - desulfurization ash mine filling cementitious material. Anhui University of Technology., 1, 1.
10. Chen, J. H., Yuan, Y. X., Zhu, Q., & Duan, J. Y. (2023). High-temperature resistance of high-strength concrete with iron tailing sand. The Journal of Building Engineering., 63(01), 105544. https://doi.org/10.1016/J.JOBE.2022.10554410.1016/J.JOBE.2022.105544 ↗
11. Chen, X. Y. (2015). The experimental study on shear performance of green tailings concrete beam. Industrial Safety and Environmental Protection., 41(06), 43–47.
12. Chen, X. Y. (2017). Experimental study on the mechanical properties of the iron tailings sand green concrete members. Wuhan University of Technology., 1, 1.
13. Chen, X., Yu, F., & Cao, Y. (2023). Preparation and properties of iron tailings powder-desulfurization ash cementitious material. Bulletin of the Chinese Silicate Society., 42(1), 180–7.
14. Cheng, Y. H., Huang, F., Li, W. C., Liu, R., Li, G. L., & Wei, J. M. (2016). Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete. Construction and Building Materials, 118(08), 164–170. https://doi.org/10.1016/j.conbuildmat.2016.05.02010.1016/j.conbuildmat.2016.05.020 ↗
15. Cheng, Y. H., Huang, F., Qi, S. S., Li, C., & Li, G. L. (2020). Durability of concrete incorporated with siliceous iron tailings. Construction and Building Materials, 242, 118147. https://doi.org/10.1016/j.conbuildmat.2020.11814710.1016/j.conbuildmat.2020.118147 ↗
16. Chinnappa, B. G., Karra, C. R. (2020) Experimental and statistical evaluations of strength properties of concrete with iron ore tailings as fine aggregate. J Hazard Toxic Radio. 24 (01): 04019038–04019038. https://doi.org/10.1061/(ASCE)HZ.2153-5515.000048010.1061/(ASCE)HZ.2153-5515.0000480 ↗
17. Deng, C. S., & Xia, Y. (2010). The experiment study of ore tailings sand in high-flow concrete. Minerals and Metallurgical Engineering., 30(01), 9–12.
18. Deysel, R. C., Boshoff, W. P., & Smit, M. S. (2023). Implementing capillary pressure control measures to prevent plastic shrinkage cracking in concrete. Construction and Building Materials, 397, 132407. https://doi.org/10.1016/j.conbuildmat.2023.13240710.1016/j.conbuildmat.2023.132407 ↗
19. Duarte, M. S., Almada, B. S., & Santos, W. J. (2022). Influence of mechanical treatment and magnetic separation on the performance of iron ore tailings as supplementary cementitious material. Journal of Building Engineering., 59(11), 105099. https://doi.org/10.1016/J.JOBE.2022.10509910.1016/J.JOBE.2022.105099 ↗
20. EN 12620. (2008) Aggregates for concrete - Part 1: Specification and conformity. European Committee for Standardization (CEN), Brussels, Belgium.
21. EN 1994–1–1. (2004) Eurocode 4: Design of composite steel and concrete structures - Part 1–1: General rules and rules for buildings. European Committee for Standardization (CEN), Brussels, Belgium.
22. Feng, X. X., Kang, Z. H., Bai, R. Y. (2013) Study on Basic properties of iron tailings sand and gravel. Concr. and Cem. Products Branch of Chin. Silicate Soc.
23. Feng, X. X., Yu, Q. Y., Liu, G., Yao, S. W. (2017) Effect of sand and gravel made from iron ore tailings on the permeability of concrete//Abstracts of the 9th International Conference on Cement Concrete.
24. Feng, X. X., Xi, X. L., Cai, J. W., Chai, H. J., & Song, Y. Z. (2011). Investigation of drying shrinkage of concrete prepared with iron mine tailings. Key Engineering Materials, 1258(477–477), 37–41. https://doi.org/10.4028/www.scientific.net/KEM.477.3710.4028/www.scientific.net/KEM.477.37 ↗
25. Feng, X. X., Zhao, Y., Lei, P. P., Shang, J. J., & Wang, L. Y. (2013b). Research on the Basic Properties of sand and gravel made from ironore tailing. Proceedings of the Symposium on Concrete and Cement Products in, 2013, 298–307.
26. Galvão, B. L. J., Andrade, D. H., Brigolini, J. G., Peixoto, F. A. R., & Mendes, C. J. (2018). Reuse of iron ore tailings from tailings dams as pigment for sustainable paints. Journal of Cleaner Production, 200, 412–422. https://doi.org/10.1016/j.jclepro.2018.07.31310.1016/j.jclepro.2018.07.313 ↗
27. GB 51032 (2014). Technical code for application of iron tailings sand concrete. China: China Planning Press.
28. GB/T 31288. (2014). Iron tailings sand. Standards Press of China.
29. GB/T50010. (2010). Code for design of concrete structures. China Building Industry Press.
30. Guan, P. W., Meng, H. Y., & Kuang, Z. F. (2016). Experimental research on the flexural performance of concrete beams with mine tailings sand. New Buildings Materials., 43(01), 18–20.
31. Guan, P. W., Yu, Z., & Guo, J. (2017). Experimental research on the flexural performance of concrete components with mine tailings sand. Structural Engineers., 33(06), 98–102. https://doi.org/10.15935/j.cnki.jggcs.2017.06.01510.15935/j.cnki.jggcs.2017.06.015 ↗
32. Gyllenram, R., Arzpeyma, N., Wei, W. J., & Jönsson, P. G. (2021). Driving investments in ore beneficiation and scrap upgrading to meet an increased demand from the direct reduction-EAF route. Mineral Economics., 35, 203–220. https://doi.org/10.1007/S13563-021-00267-210.1007/S13563-021-00267-2 ↗
33. Han, F. H., Li, L., Song, S. M., & Liu, J. H. (2017). Early-age hydration characteristics of composite binder containing iron tailing powder. Powder Technology, 315(06), 322–331. https://doi.org/10.1016/j.powtec.2017.04.02210.1016/j.powtec.2017.04.022 ↗
34. Han, F. H., Luo, A., Liu, J. H., & Zhang, Z. Q. (2020). Properties of high-volume iron tailing powder concrete under different curing conditions. Construction and Building Materials, 241(04), 118108. https://doi.org/10.1016/j.conbuildmat.2020.11810810.1016/j.conbuildmat.2020.118108 ↗
35. Hu, X. Y. (2015) Experimental research on inclined section shear capacity of reinforced concrete beams with tailing sand. Zhengzhou Univ.
36. Huang, Z. J., Zhang, Y., Ren, F. H., Zhang, L., & Guo, Q. F. (2019). Experimental analysis of influence of iron tailings sand on mechanical properties of shotcrete. Minerals Research and Development., 39(4), 121–126. https://doi.org/10.13827/j.cnki.kyyk.2019.04.02610.13827/j.cnki.kyyk.2019.04.026 ↗
37. Jayasimha, N., Sujini, B., & Annapurna, B. P. (2022). A study on durability and strength properties of high strength concrete with partial replacement of iron ore tailings with fine aggregates. Materials., 65, 1922–1929. https://doi.org/10.1016/J.MATPR.2022.05.16310.1016/J.MATPR.2022.05.163 ↗
38. Jia, X. (2013) Performance of iron mine tailing sand and its usage in concrete. Beijing Univ. of Civ. Eng. and Architecture.
39. Jiang, Y. F., Wang, H., Chen, Y., Ruan, M., & Li, W. (2019). Preparations of composites of composite concretes using iron tailings as fine aggregates and their mechanical behavior. Materials Technology., 53(04), 467–472. https://doi.org/10.17222/mit.2018.22210.17222/mit.2018.222 ↗
40. Kumar, G. P., & Eswanth, P. (2019). A feasibility study on the mechanical properties of concrete with iron ore tailings (IOT). IJESC., 09, 24050–24054.
41. Li, C., Yang, X. F., Li, Y. K., Chen, Y., Pan, X. D., Xie, Y. P., Liu, X. Y., & Li, S. Q. (2024). Preparation of high-purity SiO2 by S-HGMS coupled with mixed-acid leaching, A case study on hematite tailings from Ansteel China. Waste Manage., 174(02), 240–250. https://doi.org/10.1016/j.wasman.2023.11.02610.1016/j.wasman.2023.11.026 ↗
42. Li, H. Y. (2018). Experimental study on seismic bearing capacity of iron tailorite concrete column. North China University of Science and Technology, 1, 1.
43. Li, H. M., Zhang, Z. J., Li, L. X., Zhang, Z. C., Chen, J., & Yao, T. (2014). Types and general characteristics of the BIF-related iron deposits in China. Ore Geology Reviews., 57(03), 264–287. https://doi.org/10.1016/j.oregeorev.2013.09.01410.1016/j.oregeorev.2013.09.014 ↗
44. Li, L. (2017). Study on the effect and mechanism of iron tailings powder in silicate gel system. Beijing University of Civil Engineering and Architecture., 1, 1.
45. Li, M., Zhou, Q. L., Bai, L. M., Ma, Y. X., Guan, J. G., & Yang, P. B. (2021). Experimental study on improving of activity of iron tailings by mechanochemical effect. Multipurpose Utilization of Minerals Resources., 01, 179–185. https://doi.org/10.3969/j.issn.1000-6532.2021.01.03010.3969/j.issn.1000-6532.2021.01.030 ↗
46. Li, S. J., & Kang, H. Z. (2018). Experimental study of axial compression behavior of ferrous tailings reinforced concrete short columns restraint by stirrup. Concrete., 05, 32–35.
47. Li, T., & Dang, B. (2016). Experimental study on the compressive strength of iron tailings concrete with different replacement types. Hebei Journal of Industrial Science and Technology., 33(03), 240–245.
48. Li, T., Wang, S. L., Xu, F., Meng, X. Y., Li, B. B., & Zhan, M. (2020). Study of the basic mechanical properties and degradation mechanism of recycled concrete with tailings before and after carbonation. Journal of Cleaner Production, 259(06), 120923–120923. https://doi.org/10.1016/j.jclepro.2020.12092310.1016/j.jclepro.2020.120923 ↗
49. Li, Y. C., Liu, L., Deng, Y. F., Chen, Y. G., Li, Y. H., & Wu, J. (2023). Unlocking the potential of iron ore tailings in controlled low-strength material, feasibility, performance, and evaluation. Journal Cleaner Production, 423(10), 138772. https://doi.org/10.1016/J.JCLEPRO.2023.13877210.1016/J.JCLEPRO.2023.138772 ↗
50. Ling, J., Wang, K. P., Wang, M., Tao, Y., & Wu, T. Y. (2023). Damage evaluation of concrete using iron ore tailings as aggregates under uniaxial cyclic compression. Granul Matter., 25(02), 25. https://doi.org/10.1007/S10035-023-01316-Z10.1007/S10035-023-01316-Z ↗
51. Liu, J. P., Ge, X. W., Liu, P., Song, G., & Hu, Z. Y. (2023). Experimental study on the preparation of cementitious materials from iron ore tailings by activation. Construction and Building Materials, 385, 131409. https://doi.org/10.1016/j.conbuildmat.2023.13140910.1016/j.conbuildmat.2023.131409 ↗
52. Liu, K. N., Wang, S. L., Quan, X. Y., Jing, W., Xu, J., Zhao, N., & Liu, B. (2022). Effect of iron ore tailings industrial by-product as eco-friendly aggregate on mechanical properties, pore structure, and sulfate attack and dry-wet cycles resistance of concrete. Case Studies in Construction Materials, 17(12), e01742. https://doi.org/10.1016/J.CSCM.2022.E0147210.1016/J.CSCM.2022.E01472 ↗
53. Ma, W. H., Meng, Q. J., Kang, H. Z., Ma, Z., & Wang, Q. (2021). Experimental study on shear performance of iron tailings concrete beams. Journal of Buildings Structures., 42(1), 322–329. https://doi.org/10.14006/j.jzjgxb.2021.S1.003610.14006/j.jzjgxb.2021.S1.0036 ↗
54. Ma, X. X., Sun, J. H., Zhang, R. L., Zhang, F. S., Yuan, J., & Meng, Z. L. (2024). Experimental study on flexural performance of full iron tailings concrete beam. Journal of Architecture and Civics Engineering., 41(03), 120–128. https://doi.org/10.19815/j.jace.2022.0505110.19815/j.jace.2022.05051 ↗
55. Prema kumar, W. P., Ananthayya, M. B., & Vijay, K. (2014). Effect of replacing sand by iron ore tailings on the compressive strength of concrete and flexural strength of reinforced concrete beams. IJERT., 3(07), 1374–1376.
56. Protasio, N. M. F., Avillez, R. R. D., Letichevsky, S., & Silva, F. A. D. (2021). The use of iron ore tailings obtained from the Germano dam in the production of a sustainable concrete. J. Clean. Prod., 278(01), 123929. https://doi.org/10.1016/j.jclepro.2020.12392910.1016/j.jclepro.2020.123929 ↗
57. Qin, S. T., Dou, S., Ma, S. J., Zhang, Z. J., Hu, Y., Li, Y. H., Liu, P. Z., Lin, F. J., & Zhao, H. Y. (2024). Enhanced recovery of low-grade copper ore and associated precious metals from iron tailings: A case study in China. Colloid Surface A, 699(10), 134656. https://doi.org/10.1016/j.colsurfa.2024.13465610.1016/j.colsurfa.2024.134656 ↗
58. Qiu, G. Q., Ning, X. N., Shen, J. H., Wang, Y., Zhang, D. Y., & Deng, J. H. (2023). Recovery of iron from iron tailings by suspension magnetization roasting with biomass-derived pyrolytic gas. Waste Management, 156(02), 255–263. https://doi.org/10.1016/j.wasman.2022.11.03410.1016/j.wasman.2022.11.034 ↗
59. Radlinski, M., & Olek, J. (2015). Effects of curing conditions on properties of ternary (Ordinary Portland Cement/Fly Ash/Silica Fume) concrete. ACI Materials Journal., 112(1), 49–58. https://doi.org/10.14359/5168730710.14359/51687307 ↗
60. Rao, N. D., Chakraborty, D. P., Shukla, V., Kumar, N. (2023) Chapter 2 - Iron ore beneficiation, an overview. Miner. Process. pp. 55–77. https://doi.org/10.1016/B978-0-12-823149-4.00003-X10.1016/B978-0-12-823149-4.00003-X ↗
61. Shettima, A. U., Hussin, M. W., Ahmad, Y., & Mirza, J. (2016). Evaluation of iron ore tailings as replacement for fine aggregate in concrete. Construction and Building Materials, 120(09), 72–79. https://doi.org/10.1016/j.conbuildmat.2016.05.09510.1016/j.conbuildmat.2016.05.095 ↗
62. Shetty, K. K., Nayak, G., & Vijayan, V. (2014). Effect of red mud and iron ore tailings on the strength of self compacting concrete. European Science Journal., 10(21), 168–176.
63. Shi, J., Pan, W. Z., Kang, J. Y., Yu, Z. J., Sun, G. R., Li, J., Zheng, K. K., & Shen, J. Y. (2024a). Properties of ultra-high performance concrete incorporating iron tailings powder and iron tailings sand. Journal of Building Engineering., 83, 108442. https://doi.org/10.1016/j.jobe.2024.10844210.1016/j.jobe.2024.108442 ↗
64. Shi, J., Pan, W. Z., Kang, J. Y., Yu, Z. Y., Sun, G. R., Li, J., Zheng, K. K., & Shen, J. Y. (2024). Properties of ultra-high performance concrete incorporating IOTS powder and iron tailings sand. Journal of Building Engineering., 83(04), 108442. https://doi.org/10.1016/J.JOBE.2024.10844210.1016/J.JOBE.2024.108442 ↗
65. Song, S. M., Zhang, L. Y., & Li, Z. Y. (2019). Effect of iron tailings micropowder on late-property of cement concrete. Concr., 1, 128–131.
66. Sun, Q. R., & Liu, L. (2020). Experimental study on carbonation resistance of concrete containing iron tailings. Iron Steel Vanadium Titan., 41(02), 82–88.
67. Sun, Y. S., Zhang, X. L., Han, Y. X., & Li, Y. J. (2020). A new approach for recovering iron from iron ore tailings using suspension magnetization roasting A pilot-scale study. Powder Technology., 361(02), 571–580. https://doi.org/10.1016/j.powtec.2019.11.07610.1016/j.powtec.2019.11.076 ↗
68. Sunil, B. M., Manjunatha, L. S., Lolitha, R., & Subhash, C. Y. (2015). Potential use of mine tailings and fly ash in concrete. Adv Concr Constr., 3(1), 55–69. https://doi.org/10.12989/ACC.2015.3.1.05510.12989/ACC.2015.3.1.055 ↗
69. Tang, C., Li, K. Q., Ni, W., & Fan, D. C. (2019a). Recovering iron from iron ore tailings and preparing concrete composite admixtures. Minerals., 9(04), 232. https://doi.org/10.3390/min904023210.3390/min9040232 ↗
70. Tang, K., Mao, X. S., Xu, W., & Tang, X. L. (2019). Performance analysis of cement concrete with iron tailings sand as fine aggregate. Industrial Construction., 49(8), 153–157. https://doi.org/10.13204/j.gyjz20190802510.13204/j.gyjz201908025 ↗
71. Tanvir, A., Mohamed, E., Basarir, H., Karrech, A., Sadrossadat, E., & Yang, B. (2021). Development of ECO-UHPC utilizing gold mine tailings as quartz sand alternative. Clean Engineering and Technology., 04, 100176. https://doi.org/10.1016/J.CLET.2021.10017610.1016/J.CLET.2021.100176 ↗
72. Tao, Y. P., & Lan, T. W. (2023). Study on mechanics and durability of iron tailings recycled concrete. Journal of Functional Materials., 54(03), 3143–3148.
73. Thomas, B. S., Damare, A., & Gupta, R. C. (2013). Strength and durability characteristics of copper tailing concrete. Construction and Building Materials, 48(11), 894–900. https://doi.org/10.1016/j.conbuildmat.2013.07.07510.1016/j.conbuildmat.2013.07.075 ↗
74. Toutanji, H. A., & Bayasi, Z. (1999). Effect of curing procedures on properties of silica fume concrete. Cement Concrete Research., 29(04), 497–501. https://doi.org/10.1016/S0008-8846(98)00197-510.1016/S0008-8846(98)00197-5 ↗
75. Uchechukwu, E. A., & Ezekiel, M. J. (2014). Evaluation of the iron ore tailings from Itakpe in Nigeria as concrete material. Advanced Materials., 3(4), 27–32. https://doi.org/10.11648/j.am.20140304.1210.11648/j.am.20140304.12 ↗
76. Ugama, T. I., Ejeh, S. P., Amartey, D. Y. (2014) Effect of iron ore tailing on the properties of concrete. Civ. and Environmental Res. 6(10): 7–13. https://api.semanticscholar.org/CorpusID:54688713
77. Wang, G. Q. (2015) Experimental research on flexural behavior of reinforced concrete iron tailings. North China Univ. of Sci. and Technol.
78. Wang, J. H., Meng, X. Y., Li, T., Quan, X. Y., & Yan, Q. Q. (2019). Durability of recycled concrete with iron tailings sand under dry-wet cycle. Concrete., 366(04), 64–66.
79. Wang, L., Du, G. K., He, X. X., Wei, Z. C., Xu, Y. B., Li, S., & Liu, X. J. (2023). The influence of iron tailings powder on the properties on the performances of cement concrete with machine-made sand. Coatings, 13(05), 946. https://doi.org/10.3390/COATINGS1305094610.3390/COATINGS13050946 ↗
80. Wang, Q. (2019). Experimental study on shear bearing capacity of concrete beams with iron tailings. North China University of Science and Technology., 1, 1.
81. Wang, R. J., Zhang, Q. J., & Li, Y. (2022). Deterioration of concrete under the coupling effects of freeze–thaw cycles and other actions A review. Constr Build Mater., 319, 126045. https://doi.org/10.1016/J.CONBUILDMAT.2021.12604510.1016/J.CONBUILDMAT.2021.126045 ↗
82. Wang, W. W., & Liu, H. Q. (2019). Experimental study on mechanical properties of iron tailings sand concrete after high temperature. Non-Metallic Mines., 42(05), 42–44.
83. Wang, X., Zhang, S. F., Bao, W. B., & Qi, H. J. (2020). Experimental study on durability of tailings concrete. Concrete., 366(04), 93–97.
84. Wang, Y. Y., Han, S. J., Han, X., Yuan, Y., & Zhang, H. (2018). Influence of iron tailings sand on mechanical properties of C50 concrete. New Building Materials, 45(08), 108–110.
85. Wang, Z. M., Li, Z., Jia, G. H., & Wang, L. D. (2017). Experimental study on reuse of iron ore tailings in thermal insulated glazed hollow bead concrete concrete. Concr., 1, 138–141.
86. Wu, M. (2012) Experimental study on mechanical properties of iron mine tailings self-compacting concrete. Hefei Univ. of Technol.
87. Xie, S. H. (2022). Effect of iron tailing sand and fine powder on properties of cement-based materials and its mechanism. Univ.
88. Xu, Y. Z. (2019) Preparation and mechanical properties of high volume iron tailings sand concrete. Shenyang Univ. of Technol.
89. Xu, F., Wang, S. L., Li, T., Liu, B., Li, B. B., & Zhou, Y. (2020). The mechanical properties of tailing recycled aggregate concrete and its resistance to the coupled deterioration of sulfate attack and wetting-drying cycles. Structures., 27, 2208–2216. https://doi.org/10.1016/j.istruc.2020.07.05210.1016/j.istruc.2020.07.052 ↗
90. Xu, F., Wang, S. L., Li, T., Liu, B., Zhao, N., & Liu, K. N. (2021). The mechanical properties and resistance against the coupled deterioration of sulfate attack and freeze-thaw cycles of tailing recycled aggregate concrete. Constr Build Mater., 269(02), 121273. https://doi.org/10.1016/j.conbuildmat.2020.12127310.1016/j.conbuildmat.2020.121273 ↗
91. Yang, C. M., Cui, C., & Cui, X. Y. (2014). Characteristics of the fired bricks with low-silicon iron tailings. Construction and Building Materials, 70(11), 36–42. https://doi.org/10.1016/j.conbuildmat.2014.07.07510.1016/j.conbuildmat.2014.07.075 ↗
92. Yang, L. H., Li, J. C., Liu, H. B., Jiao, H. Z., Yin, S. H., Chen, X. M., & Yu, Y. (2023). Systematic review of mixing technology for recycling waste tailings as cemented paste backfill in mines in China. International Journal of Minerals, Metallurgy, and Materials, 30(08), 1430–1443. https://doi.org/10.1007/S12613-023-2609-610.1007/S12613-023-2609-6 ↗
93. Yellishetty, M., & Mudd, M. G. (2014). Substance flow analysis of steel and long term sustainability of iron ore resources in Australia, Brazil, China and India. Journal of Cleaner Production, 84, 400–410. https://doi.org/10.1016/j.jclepro.2014.02.04610.1016/j.jclepro.2014.02.046 ↗
94. Yin, S. N., Zhang, Z. Q., & Yu, L. W. (2019). Research on mechanical property and drying shrinkage property of mortar mixed with iron tailing sand. Bull of the China Ceram Society., 38(6), 1707–1712. https://doi.org/10.16552/j.cnki.issn1001-1625.2019.06.01110.16552/j.cnki.issn1001-1625.2019.06.011 ↗
95. Yu, F., Chen, X., Fang, Y., Cao, Y., Bu, S. S., & Zhang, S. J. (2024). Study on the basic properties of iron tailings powder-desulfurization ash mine filling cementitious material. Science and Engineering of Composite Materials, 31(1), 20240024. https://doi.org/10.1515/SECM-2024-002410.1515/SECM-2024-0024 ↗
96. Zhang, L. S. (2015) Research on bending stiffness and crack of simply-supprted beam of iron tailing concrete. Southwest Jiaotong Univ.
97. Zhang, K. (2016) Experimental research on axial compression of ferrous mill tailing concrete short columns. North China Univ. of Sci. and Technol.
98. Zhang, G. D., Zhang, X. Z., Zhou, Z. H., & Cheng, X. (2013). Preparation and properties of concrete containing iron tailings/ manufactured sand as fine aggregate. Advanced Materials Research., 838–841, 152–155. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMR.838-841.15210.4028/WWW.SCIENTIFIC.NET/AMR.838-841.152 ↗
99. Zhang, N., Tang, B. W., & Li, X. M. (2021). Cementitious activity of iron ore tailing and its utilization in cementitious materials, bricks and concrete. Construction and Building Materials, 288, 123022. https://doi.org/10.1016/j.conbuildmat.2021.12302210.1016/j.conbuildmat.2021.123022 ↗
100. Zhang, W. F., Gu, X. W., Qiu, J. P., Liu, J. P., & Zhao, Y. Q. (2020). Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete. Construction and Building Materials, 260(11), 119917. https://doi.org/10.1016/j.conbuildmat.2020.11991710.1016/j.conbuildmat.2020.119917 ↗