Punching Shear Behavior of Shear Reinforced Slab–Column Connection with Varying Flexural Reinforcement
Source abstract
Abstract
The effects of flexural reinforcement and shear reinforcement on the punching shear strength of slab–column connections are analyzed in this study. For the study, six slab–column connection specimens were constructed with varying flexural reinforcement and shear reinforcement, and were subjected to gravity load tests. Experimental results showed that all specimens were destroyed by punching failure, and that the slab–column connection behaved differently depending on the amount of shear reinforcement and flexural reinforcement. Particularly, the flexural reinforcement in the slab–column connection improved the punching strength of the specimens with or without shear reinforcement. In addition, in this study, a design formula that considers the flexural reinforcement ratio in the calculation of the punching shear strength of the shear reinforced slab–column connection was proposed and was verified using experimental results and existing test data.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. ACI Committee 318. (2014). Building code requirements for structural concrete (ACI 318-14) and commentary. Farmington Hills: American Concrete Institute.
2. Adetta, B., & Polak, M. A. (2005). Retrofit of slab column interior connections using shear bolts. ACI Structural Journal, 102(2), 268–274.
3. Choi, M. S., Ahn, J. M., Lee, K. S., & Shin, S. W. (2005). Influence of column aspect ratio on the punching shear strength of interior flat plate slab–column connections. Journal of the Architectural Institute of Korea, 21(10), 79–86.
4. Choi, C. S., Bae, B. I., Choi, Y. C., & Choi, H. K. (2012). The effect of anchorage with shear reinforcement in flat plate system. Journal of the Korea concrete Institute, 24(6), 667–675.10.4334/JKCI.2012.24.6.667 ↗
5. Choi, K. K., Kim, S. H., Kim, D. H., & Park, H. G. (2011). Direct punching shear strength model for interior slab–column connections and column footings with shear reinforcement. Journal of the Korea concrete Institute, 23(2), 159–168.10.4334/JKCI.2011.23.2.159 ↗
6. Choi, K. K., & Park, H. G. (2010). Shear strength model for interior flat plate–column connection. Journal of the Korea concrete Institute, 22(3), 345–356.10.4334/JKCI.2010.22.3.345 ↗
7. Choi, J. W., & Song, J. K. (2007). The punching shear strength of lightly reinforced thick flat plates without shear reinforcement. Journal of the Architectural Institute of Korea, 23(8), 67–74.
8. Eom, T. S., Kang, S. M., Choi, T. W., & Park, H. K. (2018). Punching shear tests of slabs with high-strength continuous hoop reinforcement. ACI Structural Journal, 115(5), 1295–1305.10.14359/51702231 ↗
9. FIP 12. (2001). Punching of structural concrete slabs. Lausanne: CEB-FIP Task Group.
10. Kinnunen, S., & Nylander, H. (1960). Punching of concrete slabs without shear reinforcement. Royal Institute of Technology, Stockholm, 158, 112.
11. Korean Concrete Institute. (2012). Concrete structure design code (KCI 2012). Seoul: Korean Concrete Institute.
12. Langohr, P. H., Ghali, A., & Dilger, W. H. (1976). Special shear reinforcement for concrete flat plates. ACI Structural Journal, 73(3), 141–146.
13. Mokhtar, A., Ghali, A., & Dilger, W. H. (1985). Stud shear reinforcement for flat concrete plates. ACI Structural Journal, 82(5), 676–683.
14. Seible, F., Ghali, A., & Dilger, W. H. (1980). Preassembled shear reinforcing units for flat plates. ACI Structural Journal, 77(1), 28–35.
15. Sherif, A. G., & Dilger, W. H. (2000). Tests of full-scale continuous reinforced concrete flat slabs. ACI Structural Journal, 97(3), 455–467.
16. Vam der Voet, A. F., Dilger, W. H., & Ghali, A. (1982). Concrete flat plates with well-anchored shear reinforcement elements. Canadian Journal of Civil Engineering, 9(1), 107–114.10.1139/l82-011 ↗