Numerical Assessment of Virtual Control Surfaces for Load Alleviation on Compressor Blades
Source abstract
Abstract
Virtual control surfaces for the optimization of steady and unsteady airloads on a compressor cascade are assessed numerically. The effects of mechanical surfaces are realized with plasma actuators, located both on the pressure and on the suction side of the blade trailing edge. Suction side plasma actuation is thought to reproduce the effects of mechanical wing spoilers, whereas pressure side plasma actuation is meant to act as a mechanical Gurney flap. Indeed, actuators are operated to generate an induced velocity field that is opposite relative to the direction of the freestream velocity. As a consequence, controlled recirculating flow areas are generated, which modify the effective mean line shape, as well as the position of the Kutta condition application point—and in turn the developed airloads. Proper triggering of pressure/suction side actuation is found to be effective in altering the blade loading, with effects comparable to those of mechanical control surfaces. Traveling wave mode simulations show that significant reductions in the peaks of the blade pitching moment can be achieved on the whole spectrum of interblade phase angles. It is proved that virtual control surfaces can provide effective load alleviation on the cascade, with potential remarkable reduction of fatigue phenomena.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Plasma and Flow Control in Aerodynamics · Fluid Dynamics and Turbulent Flows · Aerodynamics and Fluid Dynamics Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Chair for Aero Engines, Institute of Aeronautics and Astronautics, Technische Universität Berlin, 10623 Berlin, Germany Marchstraße 12-14, 10587 Berlin, Germany
Funding
Technische Universität Berlin
References (51)
Show source-provided references
1. Investigation of Flow Instability Mechanism Causing Compressor Rotor-Blade Nonsynchronous Vibration10.2514/1.J052781 ↗
2. Aerodynamic Influence of Oscillating Adjacent Airfoils in a Linear Compressor Cascade10.2514/1.J055975 ↗
3. Panovski, J., and Kielb, R.E. (1998, January 2–5). A Design Method to Prevent Low Pressure Turbine Blade Flutter. Proceedings of the ASME International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm, Sweden.10.1115/98-GT-575 ↗
4. Influence of upstream stator on rotor flutter stability in a low pressure steam turbine stage10.1243/095765005X69170 ↗
5. Tiedemann, C., Heinrich, A., and Peitsch, D. (2012, January 25–28). A New Linear High Speed Compressor Stator Cascade for Active Flow Control Investigations. Proceedings of the 6th AIAA Flow Control Conference, New Orleans, LA, USA.10.2514/6.2012-3251 ↗
6. Matejka, M., Popelka, L., Safarik, P., and Nozicka, J. (2008, January 9–13). Influence of Active Methods of Flow Control on Compressor Blade Cascade Flow. Proceedings of the ASME Turbo Expo 2008, Berlin, Germany.10.1115/GT2008-51109 ↗
7. Trávníček, Z., Cyrus, V., Šimurda, D., Luxa, M., Lukač, J., and Kordik, J. (2013). Experimental Investigation of the Compressor Cascade under an Active Flow Control. EPJ Web Conf., 45.10.1051/epjconf/20134501086 ↗
8. Monner, H.P., Huxdorf, O., Riemenschneider, J., and Keimer, R. (2015, January 5–9). Design and manufacturing of morphing fan blades for experimental investigations in a cascaded wind tunnel. Proceedings of the 23rd AIAA/AHS Adaptive Structures Conference, Kissimmee, FL, USA.10.2514/6.2015-0790 ↗
9. Hammer, S., Phan, D.T., Peter, J., Werder, T., Meyer, R., Liebich, R., and Thamsen, P.U. (2014, January 10–12). Active flow control by adaptive blade systems in periodic unsteady flow conditions. Proceedings of the Active Flow and Combustion Control, Berlin, Germany.
10. Suman, A., Fortini, A., Aldi, N., Merlin, M., and Pinelli, M. (2015, January 15–19). A Shape Memory Alloy-Based Morphing Axial Fan Blade: Part I—Blade Structure Design and Functional Characterization. Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, QC, Canada.10.1115/GT2015-42695 ↗
11. Suman, A., Fortini, A., Aldi, N., Merlin, M., and Pinelli, M. (2015, January 15–19). A Shape Memory Alloy-Based Morphing Axial Fan Blade: Part II—Blade Shape and CFD Analyses. Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, QC, Canada.10.1115/GT2015-42700 ↗
12. Vo, H.D., Cameron, J.D., and Morris, S.C. (2008, January 9–13). Control of Short Length-Scale Rotating Stall Inception on a High-Speed Axial Compressor with Plasma Actuation. Proceedings of the Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, Germany.10.1115/GT2008-50967 ↗
13. De Giorgi, M.G., Pescini, E., Marra, F., and Ficarella, A. (2014, January 16–20). Experimental and numerical analysis of a micro plasma actuator for active flow control in turbomachinery. Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany.10.1115/GT2014-25337 ↗
14. Akcayoz, E., Huu, D.V., and Mahallati, A. (2016). Controlling Corner Stall Separation With Plasma Actuators in a Compressor Cascade. J. Turbomach., 138.10.1115/1.4032675 ↗
15. Zhang, H., Yu, X., Liu, B., Wu, Y., and Li, Y. (2017). Control of Corner Separation with Plasma Actuation in a High-Speed Compressor Cascade. Appl. Sci., 7.10.3390/app7050465 ↗
16. Motta, V., Guardone, A., and Quaranta, G. (2013, January 24–26). Numerical investigation of an L-shaped deployable Gurney flap for rotorcraft vibration control. Proceedings of the International Forum on Aeroelasticity and Structural Dynamics, Bristol, UK.
17. Motta, V. (2015). Computational Fluid Dynamic Analysis of A L-shaped Gurney Flap for Vibration Control. [Ph.D. Thesis, Politecnico di Milano]. Available online: http://hdl.handle.net/10589/100350.
18. Linear Reduced-Order Model for Unsteady Aerodynamics of an L-Shaped Gurney Flap10.2514/1.C033099 ↗
19. Numerical assessment of an L-shaped Gurney flap for load control10.1177/0954410016646512 ↗
20. A comparative assessment of vibration control capabilities of a L-shaped Gurney flap10.1017/aer.2016.109 ↗
21. Flow control over an airfoil using virtual Gurney flaps10.1017/jfm.2015.22 ↗
22. Malzacher, L., Geist, S., Peitsch, D., and Hennings, H. (2016, January 12–16). A low speed compressor test rig for flutter investigations. Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, Korea.10.1115/GT2016-57960 ↗
23. Carta, F.O. (1982). An Experimental Investigation of Gapwise Periodicity and Unsteady Aerodynamic Response in an Oscillating Cascade.
24. Sachs, W. (1990). Windkanal für Instationäre Gitter (WiG), Messstrecke für Instationäre Gitter (MiG). Phase 1: Bau und InbetriebnahmeWindkanal für Instationäre Gitter (WiG), DLR, Institute of Aeroelasticity. Technical Report.
25. System Mode Shapes in the Flutter of Compressor Blade Rows10.2514/8.3502 ↗
26. Hennings, H. (1997). Flutter Investigations on a Finite Linear 2D Compressor Cascade in A Wind Tunnel in Incompressible Flow. [Ph.D. Thesis, RWTH Aachen University].
27. Garrick, I. (1992). Improved Two-Equation k–Omega Turbulence Models for Aerodynamic Flows.
28. Computation of Oscillating Airfoil Flows with One- and Two-Equation Turbulence Models10.2514/3.12300 ↗
29. Spalart, P.R., and Allmaras, S.R. (1992, January 6–9). A One-Equation Turbulence Model for Aerodynamic Flows. Proceedings of the 30th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.1992-439 ↗
30. Baldwin, B.S., and Barth, T.J. (1991, January 7–10). A One-Equation Turbulence Transport Model for High Reynolds Number Wall-Bounded Flows. Proceedings of the 29th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.1991-610 ↗
31. Pope, S.B. (2000). Turbulent Flows, Cambridge University Press.10.1017/CBO9780511840531 ↗
32. On Linear Variational Surface Deformation Methods10.1109/TVCG.2007.1054 ↗
33. ANSYS, Inc. (2016). ANSYS Academic Research, Release 17.1, ANSYS, Inc.
34. Recent developments in DBD plasma flow control10.1016/j.paerosci.2013.05.003 ↗
35. Numerical Investigation of Plasma Actuator Configurations for Flow Separation Control at Multiple Angles of Attack10.1260/1756-8250.5.1.25 ↗
36. Aholt, J., and Finaish, F. (2011, January 4–7). Active Flow Control Strategy of Laminar Separation Bubbles Developed over Subsonic Airfoils at Low Reynolds Numbers. Proceedings of the 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, USA.10.2514/6.2011-733 ↗
37. Ibrahimoglu, B., Yilmazoglu, M.Z., and Cücen, A. (2016). Numerical Analysis of Active Control of Flow on a DBD Plasma Actuator Integrated Airfoil. Sustainable Aviation: Energy and Environmental Issues, Springer International Publishing. Chapter 8.10.1007/978-3-319-34181-1_30 ↗
38. SDBD plasma enhanced aerodynamics: Concepts, optimization and application10.1016/j.paerosci.2007.06.001 ↗
39. Modeling of glow discharge-induced fluid dynamics10.1063/1.1515103 ↗
40. Optimization of micro single dielectric barrier discharge plasma actuator models based on experimental velocity and body force fields10.1016/j.actaastro.2015.07.015 ↗
41. Airflow Control by Non-Thermal Plasma Actuators10.1088/0022-3727/40/3/S01 ↗
42. Corke, T.C., and Post, M.L. (2005, January 10–13). Overview of Plasma Flow control: Concepts, Optimization and Applications. Proceedings of the 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.2005-563 ↗
43. Plasma Flaps and Slats: An Application of Weakly Ionized Plasma Actuators10.2514/1.38232 ↗
44. Belz, J., May, M., Siemann, J., Seume, J.R., Voigt, C., Böhmer, H., and Grüber, B. (2013, January 3–7). Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk Using Piezo-Electric Macro Fiber Composites. Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, TX, USA.10.1115/GT2013-95735 ↗
45. Iwrey, B.M. (2016). Gas Turbine Engine with Rotor Blade Clearance Flow Control. (2016/0177769 A1), U.S. Patent.
46. An Analysis of the Stall Flutter Instability of Helicopter Rotor Blades10.4050/JAHS.12.4.1 ↗
47. Experimental investigation of a trailing edge L-shaped tab on a pitching airfoil in deep dynamic stall conditions10.1177/0954410013517089 ↗
48. Abbott, I., and von Doenhoff, A. (1949). Theory of Wing Sections, Dover Publication, Inc.
49. Giguère, P., Lemay, J., and Dumas, G. (1995, January 19–22). Gurney Flap Effects and Scaling for Low-Speed Airfoils. Proceedings of the 13th AIAA Applied Aerodynamic Conference, San Diego, CA, USA.10.2514/6.1995-1881 ↗
50. Influence of airfoil thickness on unsteady aerodynamic loads on pitching airfoils10.1017/jfm.2015.280 ↗
51. Leishman, J.G. (2006). Principle of Helicopter Aerodynamics, Cambridge University Press.