Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil
Source abstract
Abstract
The main aim of the article is to present the design of laboratory test equipment, which is appropriate for monitoring the efficiency of oil filters and the system for evaluating the technical life of engine oils in terms of possible extension of service intervals. The functionality of the designed laboratory test equipment for the filtration of motor oils was verified by a practical experiment with a verification measurement and assessment of the suitability of the hydraulic circuit elements and the designed sensing equipment. The laboratory equipment enables the testing of oil filters with different filtration capacity during simultaneous testing in two separate hydraulic circuits with differently contaminated engine oil, while it enables laboratory measurements to be performed while simulating operating conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical and Thermal Properties Analysis · Vehicle emissions and performance · Engine and Fuel Emissions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Transport and Handling, Faculty of Engineering, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 01 Nitra, Slovakia
The Slovak Legal Metrology (SLM), Hviezdoslavova 1124/31, 974 01 Banská Bystrica, Slovakia
Faculty of Agriculture in Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia
Faculty of Mechanical Engineering, UTP University of Science and Technology, Al. prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
References (18)
Show source-provided references
1. (2012, April 01). Stabilita Mazacích Olejov. Available online: http://www.tribotechnika.sk/tribotechnika-42012/stabilita-mazacich-olejov.html.
2. Peťková, V. (2012). Tribotechnika v Teórii a Praxi, Vienala. [1st ed.].
3. Detection and characterization of wear particles of universal tractor oil using of particles size analyzer
4. Kombinovaný stend pre meranie hydraulických prvkov. Hydraulika a pneumatika
5. The possibilities of using ecological liquids in tribological gliding systems with a selected surface created by the radial welding technology
6. Semjonovs, J. (2014, January 29–30). Increasing of engine oil change interval by using additional oil filter in diesel engines. In Proceeding of 13th International Scientific Conference Engineering for Rural Development, Jelgava, Latvia.
7. Ziegler, J., Helebrant, F., and Marasová, D. (2004). Technická Diagnostika a Spolehlivost, Díl I. Tribodiagnostika, Technická Univerzita Ostrava. [1st ed.].
8. (2019, January 01). Tribotechnická Diagnostika v Automobilovom Priemysle. Available online: http://www.tribotechnika.sk/tribotechnika-1-2009/tribotechnicka-diagnostika-v-automobilovom-priemysle.html.
9. Testing stands for laboratory tests of hydrostatic pump of agricultural machinery
10. Kučík, P. (2010). Prevádzka Hydraulických Zariadení, Fluidconsult, s.r.o.. [1st ed.].
11. (2020, November 08). Products Hydac. Available online: https://www.hydac.com.
12. (2020, October 10). Cross Gear Pump ALP2D Series. Available online: https://www.crosshydraulics.com.au/files/products/gearPumps/ALP2_Series.pdf.
13. Petranský, I., Drabant, Š., Tkáč, Z., Žikla, A., Bolla, M., and Kleinedler, P. (2004). Skúšobné Stavy pre Životnostné Skúšky Hydrostatických Prevodníkov, Slovenská Poľnohospodárska Univerzita v Nitre. [1st ed.].
14. Possibility of hydraulic fluids with a low environmental impact application in agriculture and transport machinery
15. (2020, November 08). Effect of Lubricant Contaminants on Tribological Characteristics during Boundary Lubrication Reciprocating Sliding. Available online: https://arxiv.org/ftp/arxiv/papers/1710/1710.04448.pdf.
16. Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction10.1016/j.enconman.2014.11.055 ↗
17. Complex analysis of influence of biodiesel and its mixture on regulated and unregulated emissions of motor vehicles with the aim to protect air quality and environment10.1007/s11869-019-00704-w ↗
18. Lubrication Oil Condition Monitoring and Remaining Useful Life Prediction with Particle Filtering