Modeling and Experimental Verification of Induction Heating of Thin Molybdenum Sheets
Source abstract
Abstract
This paper deals with the issues relevant for precise finite element method (FEM) modeling of thin molybdenum plates’ induction heating. The proposed methodology describes the step-by-step Multiphysics (electro-thermal) design approach, verified by the experimental measurements. Initially, it was observed that the relative error between model and experimental set-up is within the 1.2% up to 2.5% depending on the location of the measuring points. Further research was focused on the enhancement of the simulation model in the form of its parametrization. It means that it is easy to define the induction coil’s operational parameters and geometrical properties (ferrite shape, operating frequency, the distance between plate and heating element, the value of coil current, etc.). The target of this approach is to be able to determine the optimal operational settings targeting the required heating performance of thin molybdenum plates. One of the main requirements regarding the optimal heating process is temperature distribution within the molybdenum plate’s surface. The proposed model makes it possible to obtain information on optimal operational conditions based on the received results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Induction Heating and Inverter Technology · Mechanical and Thermal Properties Analysis · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechatronics and Electronics, Faculty of Electrical Engineering and Information Technologies, University of Zilina, 010 26 Zilina, Slovakia
Research Center, University of Zilina, 010 26 Zilina, Slovakia
References (30)
Show source-provided references
1. Pepper, I., Gerba, C., and Gentry, T. (2013). Enviromental Microbiology, Elsevier. [3rd ed.].
2. Griffiths, A., Miller, J., and Suzuki, D. (2000). An Introduction to Genetic Analysis, W.H. Freeman. [7th ed.].
3. Thermodynamic approaches for the prediction of oral drug absorption10.1007/s10973-017-6473-3 ↗
4. Temperature-Sensitive Mutations Made Easy: Generating Conditional Mutations by Using Temperature-Sensitive Inteins That Function within Different Temperature10.1534/genetics.109.104794 ↗
5. High Speed Video System for Tissue Measurement Based on PWM Regulated Dimming and Virtual Instrumentation
6. Thermal propagation analysis for living tissue with surface heating10.1016/j.ijthermalsci.2007.04.005 ↗
7. Challenges in education in thermal analysis and calorimetry10.1007/s10973-013-3135-y ↗
8. Finite element model to study the thermal effect of tumors in dermal regions of irregular tapered shaped human limbs10.1016/j.ijthermalsci.2015.07.010 ↗
9. Thermal characteristics and regeneration analyses of adsorbents by differential scanning calorimetry and scanning electron microscope10.1007/s10973-009-0024-5 ↗
10. Thermal properties of electrospun polyvinylpyrrolidone/titanium tetraisopropoxide composite nanofibers10.1007/s10973-019-08030-0 ↗
11. Shunmugam, M.S., and Kanthababu, M. (2018). Advances in Simulation, Product Design and Development. Advances in Simulation, Product Design and Development, Proceedings of the AIMTDR 2018, Berlin/Heidelberg, Germany, 6 November 2018, Springer.
12. Finite Element simulation of Temperature Distribution and Residual Stress in Single Bead on Plate Weld Trial using Double Ellipsoidal Heat Source Model
13. Hyoe, T., Colegrove, P.A., and Shercliff, H. (2003). Thermal and microstructure modelling in thick plate aluminium alloy 7075 friction stir welds. Friction Stir Welding and Processing II, Proceedings of the 2nd International Conference on Friction Stir Welding and Processing, San Diego, CA, USA, 13–16 September 2003, The Minerals, Metals and Materials Society.
14. Friction Stir Welding of Thick AA2519 Alloy: Defect Elimination, Mechanical and Micro-Structural Characterization10.1007/s12540-019-00472-3 ↗
15. Coupled thermal-mechanical simulation on quenching of aluminum alloy thick-plate based on ANSYS
16. CFD modelling of friction stir welding of thick plate 7449 aluminium alloy10.1179/174329306X107700 ↗
17. Hargas, L., Koniar, D., and Hrianka, M. (2014, January 19–20). Adjusting and Conditioning of High Speed Videosequences for Diagnostic Purposes in Medicine. Proceedings of the 10th International Conference ELEKTRO 2014, Rajecké Teplice, Slovakia.10.1109/ELEKTRO.2014.6848957 ↗
18. Construction of a thermal conductivity measurement system for small single crystals of organic conductors10.1007/s10973-018-7799-1 ↗
19. Numerical analysis of a clinically-extracted vascular tissue during cryo-freezing using immersed boundary method10.1016/j.ijthermalsci.2016.06.033 ↗
20. Effects of heat treatment and SOC on fire behaviors of lithium-ion batteries pack10.1007/s10973-018-7864-9 ↗
21. Hruska, K., Kindl, V., and Pechanek, R. (2012, January 4–6). Design and FEM Analyses of an Electrically Excited Automotive Synchronous Motor. Proceedings of the 15th International Power Electronics and Motion Control Conference and Exposition (EPE-PEMC ECCE Europe), Novi Sad, Serbia.10.1109/EPEPEMC.2012.6397422 ↗
22. Rafajdus, P., Peniak, A., Peter, D., Makyś, P., and Szabó, L. (2014, January 22–24). Optimization of Switched Reluctance Motor Design Procedure for Electrical Vehicles. Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), Brasov, Romania.10.1109/OPTIM.2014.6851033 ↗
23. Visual system-based object tracking using image segmentation for biomedical applications10.1007/s00202-017-0609-0 ↗
24. Experimental research of optimization methodology for local, resistive—Heating of thin molybdenum plates10.1016/j.ijthermalsci.2017.07.009 ↗
25. Thermal stability assessment of a new energetic Ca(II) compound with ZTO ligand by DSC and ARC10.1007/s10973-018-7552-9 ↗
26. CFD analysis of thermal and hydrodynamic characteristics of hybrid nanofluid in a new designed sinusoidal double-layered microchannel heat sink10.1007/s10973-018-7671-3 ↗
27. The modeling and simulation of the thermal analysis on the hydrogenerator stator winding insulation10.1007/s10973-013-3089-0 ↗
28. Thermal Behaviour of Titania Based Materials: Mathematical modeling of emanation thermal analysis results10.1023/A:1013791719378 ↗
29. Experimental investigation of thermal conductivity and its ANN modeling for glycol-based Ag/ZnO hybrid nanofluids with low concentration10.1007/s10973-019-08618-6 ↗
30. Thermal analysis in numerical thermodynamic modeling of solid fuel conversion10.1007/s10973-012-2626-6 ↗