Theoretical and Experimental Study on Contact Characteristics of Spiral Bevel Gears under Quasi-Static and Large Loading Conditions
Source abstract
Abstract
The precise mathematical model for the tooth surface and transition surface of spiral bevel gears is derived. Taking a pair of spiral bevel gears of a heavy vehicle as an example of calculation and analysis, a finite element model of spiral bevel gears transmission system is established. Through the finite element tooth contact analysis under quasi-static loading and high loading condition, the influences of torque on the root stress distribution, contact stress, and transmission error are discussed, and the results are compared with the empirical formula results. Finally, a contact performance test bench of spiral bevel gear pair is developed, then the root bending stress, contact pattern, and transmission error tests are carried out. These experiment results are compared with analyzed ones, which showed a good agreement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310000, China
College of Technology, Lishui University, Lishui 323000, China
Guangzhou Institute of Advanced Technology, Chinese Academy of Sciences, Guangzhou 510000, China
Wuhan Second Ship Design and Research Institute, Wuhan 430205, China
References (28)
Show source-provided references
1. Litvin, F.L., and Fuentes, A. (2004). Gear Geometry and Applied Theory, Cambridge University Press.10.1017/CBO9780511547126 ↗
2. Finite element modeling of incremental bridge launching and study on behavior of the bridge during construction stages
3. Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears10.1016/S0094-114X(01)00086-6 ↗
4. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears10.1016/j.mechmachtheory.2005.03.001 ↗
5. A new analytical identification approach to the tooth contact points considering misalignments for spiral bevel or hypoid gears10.1016/j.mechmachtheory.2017.12.003 ↗
6. Optimization of face-hobbed hypoid gears10.1016/j.mechmachtheory.2014.02.003 ↗
7. Design and manufacture of spiral bevel gears with reduced transmission errors10.1115/1.3087540 ↗
8. Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors10.1016/j.cja.2013.05.005 ↗
9. Manufacture of optimized face-hobbed spiral bevel gears on computer numerical control hypoid generator10.1115/1.4026820 ↗
10. Computer simulation of tooth contact analysis of mismatched spiral bevel gears10.1016/j.mechmachtheory.2006.02.010 ↗
11. An ease-off based optimization of the loaded transmission error of hypoid gears10.1115/1.4000645 ↗
12. Optimization of the loaded contact pattern in hypoid gears by automatic topography modification10.1115/1.3013844 ↗
13. Multi objective ease-off optimization of hypoid gears for their efficiency, noise, and durability performances10.1115/1.4005234 ↗
14. An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations10.1115/1.4001722 ↗
15. A load distribution model for hypoid gears using ease-off topography and shell theory10.1016/j.mechmachtheory.2009.03.009 ↗
16. An ease-off flank modification method for high contact ratio spiral bevel gears with modified curvature motion10.1299/jamdsm.2017jamdsm0034 ↗
17. A flank modification method for spiral bevel gears based on mismatch topography adjustment10.1299/jamdsm.2018jamdsm0057 ↗
18. Numerical and experimental study of the loaded transmission error of a spiral bevel gear10.1115/1.2406089 ↗
19. Analytical and experimental tooth contact pattern of large-sized spiral bevel gears in cyclo-palloid system
20. A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears10.1631/jzus.A1600240 ↗
21. Theoretical and experimental investigation on contact characteristics of hypoid gears under quasi-static condition
22. A novel method for gear tooth contact analysis and experimental validation10.1016/j.mechmachtheory.2018.04.002 ↗
23. Simulation and experimental research on grinding surface topography of spiral bevel gear10.3901/JME.2019.03.191 ↗
24. ISO (2014). 10300-Calculation of Load Capacity of Bevel Gears, International Standard.
25. ISO (2006). 6336-Calculation of Load Capacity of Spur and Helical Gears, International Standard.
26. Chen, X.N., and Gu, D.Q. (2004). Machine Design, Zhejiang University Press.
27. The Contact ratio of Spiral Bevel Gear for Different Loads
28. AGMA (1997). Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, ZEROL Bevel and Spiral Bevel Gear Teeth, American National Standard.