The Interphase Influences on the Particle-Reinforced Composites with Periodic Particle Configuration
Source abstract
Abstract
This work improved upon an effective micromechanical method to analyze the mechanical properties of three-dimensional particle-reinforced composites (PRC) with consideration of the interfacial debonding. By incorporating the interfacial debonding model, Mises yield criterion, and failure theory, the effects of particle shape, particle volume fraction, and loading condition on the mechanical properties are studied. A comparison of simulation results obtained from the established method and published experimental data is presented. Good consistency can be found in this study. On this basis, the interfacial cohesive strength and particle shape effects on the biaxial failure strength of particle-reinforced composites with interfacial debonding were also studied. The results revealed that both interfacial strength and particle shape have significant effects on biaxial tensile failure strength. However, the different interfacial strength influence on failure envelope can hardly be discerned in biaxial compressive loading.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Composite Material Mechanics · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Ministry of Education for Electronic Equipment Structure Design, Xidian University, Xi’an 710071, China
Research Center for Applied Mechanics, Xidian University, Xi’an 710071, China
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
References (43)
Show source-provided references
1. Shape memory polymer composites of poly (styrene-b-butadiene-b-styrene) copolymer/liner low density polyethylene/Fe3O4 nanoparticles for remote activation10.3390/app6110333 ↗
2. Prediction of the effective Young’s modulus of a particulate composite containing fractured particles10.1016/j.finel.2012.10.006 ↗
3. Estimation of lamina stiffness and strength of quadriaxial non-crimp fabric composites based on semi-laminar considerations10.3390/app6090267 ↗
4. Structure evolutions in a Ti–6Al–4V matrix composite reinforced with TiB, characterised using high energy X-ray diffraction10.1016/j.jallcom.2014.10.203 ↗
5. A new and general formulation of three-dimensional finite-volume micromechanics for particulate reinforced composites with viscoplastic phases10.1016/j.compositesb.2015.09.014 ↗
6. Experimental investigation on mechanical properties of extruded foamed pvc-wood composites reinforced with continuous glass fibers10.1002/pc.23340 ↗
7. On particle size effects: An internal length mean field approach using field dislocation mechanics10.1016/j.actamat.2010.06.034 ↗
8. High-performance nanocomposites based on arcylonitrile-butadiene rubber with fillers of different particle size: mechanical and morphological studies10.1002/pc.20938 ↗
9. Main and interaction effects of matrix particle size, reinforcement particle size and volume fraction on wear characteristics of Al–SiCp composites using central composite design10.1016/j.compositesb.2013.02.001 ↗
10. Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites10.1515/secm-2011-0139 ↗
11. The influence of filler geometrical shape on the friction and wear of particle filled polymers10.1515/SECM.1997.6.2.95 ↗
12. Effects of particle shape on the macroscopic and microscopic linear behaviors of particle reinforced composites10.1016/j.ijengsci.2012.03.022 ↗
13. Estimation of elastic moduli of particulate composites by new models and comparison with moduli measured by tension, dynamic, and ultrasonic tests10.1155/2010/891824 ↗
14. Numerical and statistical estimates of the representative volume element of elastoplastic random composites10.1016/j.euromechsol.2011.07.010 ↗
15. Initial damage induced by thermal residual stress and microscopic failure analysis of carbon-fiber reinforced composite under shear loading10.1080/09276440.2015.1021592 ↗
16. An FEM Analysis with Consideration of random void defects for predicting the mechanical properties of 3D braided composites10.1155/2014/439819 ↗
17. Taylor-based nonlocal theory of plasticity10.1016/S0020-7683(00)00173-6 ↗
18. A conventional theory of mechanism-based strain gradient plasticit10.1016/j.ijplas.2003.08.002 ↗
19. A micromechanical model of particle-reinforced metal matrix composites considering particle size and damage10.1016/j.commatsci.2014.01.012 ↗
20. Probabilistic response of heterogeneous particle reinforced metal matrix composites with particle size dependent strengthening10.1016/j.commatsci.2013.05.047 ↗
21. Homogenization of the average thermo-elastoplastic properties of particle reinforced metal matrix composites: The minimum representative volume element size10.1016/j.compstruct.2014.03.048 ↗
22. A multiscale approach and microstructure design of the elastic composite behavior reinforced with natural particles10.1016/j.compositesb.2014.05.008 ↗
23. Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite10.1016/j.matchar.2013.09.008 ↗
24. The influence of particle distribution and interphase on the thermal expansion coefficient of particulate composites by the use of a new model10.1080/09276440.2016.1132097 ↗
25. Micromechanics-based elastic damage modeling of particulate composites with weakened interfaces10.1016/j.ijsolstr.2007.06.019 ↗
26. Polypropylene/SiO2 nanocomposites filled with different nanosilicas: Thermal and mechanical properties, morphology and interphase characterization10.1007/s10853-010-4901-x ↗
27. Influence of particle size on the fracture toughness of a PP-based particulate composite10.1007/s11029-009-9085-6 ↗
28. An enhanced FEM model for particle size dependent flow strengthening and interface damage in particle reinforced metal matrix composites10.1016/j.compscitech.2010.09.014 ↗
29. Analysis of the stress states and interface damage in a particle reinforced composite based on a micromodel using cohesive elements10.1016/j.msea.2013.09.097 ↗
30. A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion10.1016/j.compscitech.2014.10.010 ↗
31. Effects of interphase damage and residual stresses on mechanical behavior of particle reinforced metal-matrix composites10.1007/s10443-013-9348-1 ↗
32. Determination of the effect of interphase on the fracture toughness and stiffness of a particulate polymer composite10.1007/s11029-013-9364-0 ↗
33. Aboudi, J., Arnold, S.M., and Bednarcyk, B.A. (2013). Micromechanics of Composite Materials—A Generalized Multiscale Analysis Approach, Elsevier.10.1016/B978-0-12-397035-0.00013-6 ↗
34. Aboudi, J. (1991). Mechanics of Composite Materials—A Unified Micromechanical Approach, Elsevier.
35. Micromechanics-based deformation and failure prediction for longitudinally reinforced titanium composites10.1016/S0266-3538(01)00004-5 ↗
36. Particle reinforced aluminum and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
37. A study of particle size effect and interface fracture in aluminum alloy composite via an extended conventional theory of mechanism-based strain-gradient plasticity10.1016/j.compscitech.2004.12.029 ↗
38. Effects of thermal stress and imperfect interfacial bonding on the mechanical behavior of composites subjected to off-axis loading10.1016/j.msea.2010.07.104 ↗
39. Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding10.1016/j.ijmecsci.2011.10.002 ↗
40. Predictions of viscoelastic strain rate dependent behavior of fiber-reinforced polymeric composites10.1016/j.compstruct.2011.11.016 ↗
41. Analysis of particle–matrix interfacial debonding using the proper generalized decomposition10.1016/j.compstruct.2014.01.037 ↗
42. Working temperature variation effect on the failure envelope of continuous fiber-reinforced composites10.1080/09276440.2015.1050303 ↗
43. Prediction of biaxial failure envelopes for composite laminates based on Generalized Method of Cells10.1016/j.compositesb.2012.01.003 ↗