journal article·2016-12-06Open access

Enhancing the Drag Reduction Phenomenon within a Rotating Disk Apparatus Using Polymer-Surfactant Additives

Musaab Rashed, Mohamad Mohd Salleh, Hayder Abdulbari, Mohd Ismail

Applied Sciences· Volume 6· Issue 12

Abstract

Pipelines and tubes play important roles in transporting economic liquids, such as water, petroleum derivatives, and crude oil. However, turbulence reduces the initial flow rate at which liquids are pumped, thereby making liquid transportation through pipelines inefficient. This study focuses on enhancing the drag reduction (DR) phenomenon within a rotating disk apparatus (RDA) using polymer-surfactant additives. The complex mixture of polyisobutylene (PIB) and sodium dioctyl sulfosuccinate (SDS) was used. These materials were tested individually and as a complex mixture in RDA at various concentrations and rotational speeds (rpm). The morphology of this complex was investigated using transmission electronic microscopy (TEM). The reduction of the degradation level caused by the continuous circulation of surfactant additives in RDA could improve the long-term DR level. Experimental result shows that the maximum %DR of the complex mixture was 21.455% at 3000 rpm, while the PIB and SDS were 19.197% and 8.03%, respectively. Therefore, the complex mixture had better performance than these substances alone and were highly dependent on the alkyl chain of the surfactant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Rheology and Fluid Dynamics Studies · Fluid Dynamics and Vibration Analysis · Hydraulic flow and structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43300 UPM Serdang, Selangor, Malaysia

Institute of Technology, Middle Technical University, Foundation of Technical Education, Baghdad-Alzafaranya, P.O. Box 29008, Iraq

Material and Processing Technology Laboratory, Institute of Advanced Technology, Universiti Putra Malaysia, 43300 UPM Serdang, Selangor, Malaysia

Center of Excellence for Advanced Research in Fluid Flow, Universiti Malaysia Pahang, Gambang, 26300 Kuantan, Pahang, Malaysia

References (40)

Show source-provided references
1. Roles of drag reducing polymers in single- and multi-phase flows10.1016/j.cherd.2014.02.031 ↗
2. Polymer-induced turbulent drag reduction10.1021/ie9507484 ↗
3. A high-precision rotating disk apparatus for drag reduction characterization10.1016/S0142-9418(99)00077-X ↗
4. Universal drag reduction characteristics of saline water-soluble poly(ethylene oxide) in a rotating disk apparatus10.1007/s003960000328 ↗
5. Polymer turbulent drag reduction near the theta point10.1209/0295-5075/80/58003 ↗
6. Mechanical degradation kinetics of poly(ethylene oxide) in a turbulent flow
7. Measurement of drag reduction in polymer added turbulent flow10.1016/j.icheatmasstransfer.2009.08.002 ↗
8. A study of drag reduction by polymer additives in rotating disk geometry
9. Turbulent drag reduction of polyacrylamide solutions: Effect of degradation on molecular weight distribution10.1016/j.jnnfm.2004.08.006 ↗
10. Effect of polyacrylamide on drag reduction for flow through annular conduits
11. Shanshool, J., and Haider, M.T. (2008, January 27–29). Effect of molecular weight on turbulent drag reduction with polyisobutylene. Proceedings of the First Regional Conference of Engineering and Sceince, Mexico City, Mexico.
12. Experimental study of drag reduction by a polymeric additive in slug two-phase flow of crude oil and air in horizontal pipes10.1016/j.ces.2005.09.006 ↗
13. Mechanical degradation of polyisobutylene under turbulent flow10.1007/s00396-002-0690-3 ↗
14. Time dependence of turbulent drag reduction efficiency of polyisobutylene in kerosene10.1016/j.jiec.2010.03.027 ↗
15. Drag reduction in the turbulent pipe flow of polymers10.1016/S0377-0257(98)00098-6 ↗
16. Tian, M., Fang, B., Jin, L., Lu, Y., Qiu, X., Jin, H., and Li, K. (2015). Rheological and drag reduction properties of hydroxypropyl xanthan gum solutions. Chin. J. Chem. Eng.10.1016/j.cjche.2015.04.003 ↗
17. Drag reduction effectiveness of dilute and entangled xanthan in turbulent pipe flow10.1016/j.jnnfm.2010.10.002 ↗
18. Mechanical degradation of polysaccharide guar gum under turbulent flow10.1016/j.jiec.2009.09.073 ↗
19. Characterization of drag reducing guar gum in a rotating disk flow10.1002/app.10300 ↗
20. An exponential decay function for polymer degradation in turbulent drag reduction10.1016/S0141-3910(00)00080-X ↗
21. Degradation of surfactant solutions by age and by a flow singularity10.1016/j.cep.2004.02.001 ↗
22. Experimental study of drag-reduction mechanism for a dilute surfactant solution flow10.1016/j.ijheatmasstransfer.2007.04.048 ↗
23. Flow and heat transfer characteristics of drag reducing surfactant solution in a helically coiled pipe10.1007/s00231-004-0599-0 ↗
24. Effect of cationic surfactant addition on the drag reduction behaviour of anionic polymer solutions10.1002/cjce.20686 ↗
25. Kwak, J.C. (1998). Polymer-Surfactant Systems, Marcel Dekker Inc.
26. Unlike surfactant-polymer interactions of sodium dodecyl sulfate and sodium dodecylbenzene sulfonate with water-soluble polymers10.1007/s00396-002-0822-9 ↗
27. Interfacial tension in aqueous biopolymer-surfactant mixtures10.1016/j.jcis.2007.10.006 ↗
28. Polymer-surfactant interaction part II. Polymer and surfactant of opposite charge10.1016/0166-6622(86)80341-9 ↗
29. The interaction between polyelectrolytes and surfactants of opposite charge10.1080/15321799508014588 ↗
30. Intensification of drag reduction effect by simultaneous addition of surfactant and high molecular polymer into the solvent10.1016/j.cherd.2015.02.006 ↗
31. The influence of polymer-surfactant aggregates on drag reduction10.1016/j.tsf.2007.11.057 ↗
32. Energy dissipation reduction using similarly-charged polymer-surfactant complex
33. Enhancement of additives polymeric drag resistance to degradation
34. Effect of polymer-surfactant interaction on its turbulent drag reduction10.1016/j.colsurfa.2011.04.018 ↗
35. Studying the interaction between a new mixture in enhancing drag reduction efficiency
36. Drag-reduction effectiveness of xanthan gum in a rotating disk apparatus10.1016/S0144-8617(00)00232-0 ↗
37. Turbulent drag reduction efficiency and mechanical degradation of poly (acrylamide)10.1081/MB-120029784 ↗
38. A dual mechanism of the drag reduction by rigid polymers and cationic surfactant: Complex and nanofluids of xanthan gum and hexadecyl trimethyl ammonium chloride10.15623/ijret.2015.0402012 ↗
39. Held, P. Rapid Critical Micelle Concentration (CMC) Determination Using Fluorescence Polarization. Available online: http://www.biotek.com/resources/articles/cmc_determination_using_fluorescence_polarization.html.
40. Effect of SDBS on the drag reduction characteristics of polyacrylamide in a rotating disk apparatus10.14419/ijbas.v4i3.4883 ↗