Moisture Buffering of Multilayer Internal Wall Assemblies at the Micro Scale: Experimental Study and Numerical Modelling
Source abstract
Abstract
In this paper, a series of experiments assessing the moisture buffer value (MBV) of four internal wall assembly samples made from hygroscopic materials was performed. A modified Nordtest protocol was used. Moisture buffer values of all the investigated wall assemblies, with varying moisture loads in the range of 50% to 80%, showed a moderate moisture buffer value (MBV: 0.5–1.0 (g·m−2·%RH−1)). The results showed that in a wall assembly where the MBV of the whole assembly is lower than the MBV of the outer layers, the moisture-buffering capacity of the inner layer is untapped. Outer layers affect inner layers by changing their moisture-buffering capacity, which in turn changes the overall performance of the whole assembly. In addition, it was observed that if the penetration depth value of the outer layer is greater than its thickness, vapour reaches into the deeper layer and wall assemblies made of layers with materials characterized by a lower value of penetration depth reach steady state more slowly. The WUFI Pro tool was used to compare the simulated and experimental results. Despite the discrepancies between these results, it offers a simplified method, helping designers make decisions about which materials to choose to improve the moisture-buffering effect.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hygrothermal properties of building materials · Masonry and Concrete Structural Analysis · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Building Research Institute, Department of Thermal Physics, Acoustics and Environment, ul. Filtrowa 1, 00-611 Warszawa, Poland
References (43)
Show source-provided references
1. (2018, April 12). Directive (EU) 2018/844 of the European Parliament and of the Council of 30 May 2018 Amending Directive 2010/31/EU on the Energy Performance of Buildings and Directive 2012/27/EU on Energy Efficiency. Available online: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv%3AOJ.L_.2018.156.01.0075.01.ENG.
2. The use of insulating materials based on natural fibers in combination with plant facades in building constructions10.1016/j.enbuild.2015.12.037 ↗
3. Experimental thermal characterization of bio-based materials (Aleppo Pine wood, cork and their composites) for building insulation10.1016/j.enbuild.2016.01.007 ↗
4. A comparative study of the thermal comfort of different building materials in Madurai
5. Salonvaara, M., Ojanen, T., Holm, A., Künzel, H.M., and Karagiozis, A.N. (2004, January 5). Moisture Buffering Effects on Indoor Air Quality-experimental and Simulation Results. Proceedings of the Performance of Exterior Envelopes of Whole Buildings IX International Conference, Clearwater Beach, FL, USA.
6. Energy consumption and ventilation performance of a naturally ventilated ecological house in a cold climate10.1016/j.enbuild.2004.04.006 ↗
7. The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings10.1016/j.buildenv.2008.04.017 ↗
8. Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact10.1016/j.enbuild.2006.03.026 ↗
9. Moisture buffering phenomenon and its impact on building energy consumption10.1016/j.applthermaleng.2017.05.173 ↗
10. Rode, C., Peuhkuri, R.H., Mortensen, L.H., and Hansen, K.K. (2019, January 05). Moisture Buffering of Building Materials. 2005 Final Report. Technical University of Denmark. Available online: https://core.ac.uk/download/pdf/60659981.pdf.
11. Padfied, T. (1998). The Role of Absorbent Building Materials. In Moderating Changes of Relative Humidity in Department of Structural Engineering and Materials. [Ph. D. Thesis, The Technical University of Denmark].
12. Conditions affecting the moisture buffering measurement performed on compressed earth blocks10.1016/j.buildenv.2014.01.009 ↗
13. An inverse modelling approach to estimate the hygric parameters of clay-based masonry during a Moisture Buffer Value test10.1016/j.buildenv.2014.06.018 ↗
14. Hygrothermal properties of unfired earth bricks: Effect of barley straw, hemp shiv and corn cob addition10.1016/j.enbuild.2018.08.021 ↗
15. Determination of hygrothermal parameters of experimental and commercial bio-based insulation materials10.1016/j.conbuildmat.2016.07.106 ↗
16. Hygrothermal properties of bio-insulation building materials based on bamboo fibers and bio-glues10.1016/j.conbuildmat.2017.08.075 ↗
17. Hygrothermal performance of lime hemp wall assemblies10.1177/1744259109355730 ↗
18. Mortensen, L.H., Rode, C., and Peuhkuri, R.H. (2005, January 13–15). Full Scale Tests of Moisture Buffer Capacity of Wall Materials. Proceedings of the 7th Symposium on Building Physics in the Nordic Countries, Reykjavik, Iceland. Available online: https://orbit.dtu.dk/files/122242065/Paper_NBPS2005_passys_ver.1.1_w_header.pdf.
19. Experimental and numerical analysis of the transient hygrothermal behavior of multilayered hemp concrete wall10.1016/j.enbuild.2015.11.027 ↗
20. Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime10.1016/j.buildenv.2015.07.011 ↗
21. Ojanen, T., and Salonvaara, M. (2003, January 14–18). A Method to Determine the Moisture Buffering Effect of Structures During Diurnal Cycles of Indoor Air Moisture Loads. In Proceeding of the 2nd International Building Physics Conference, Leuven, Belgium.
22. Busser, T., Berger, J., Piot, A., Pailha, M., and Woloszyn, M. (2019, April 15). Experimental Validation of Hygrothermal Models for Building Materials and Walls: An Analysis of Recent Trends. Available online: https://hal.archives-ouvertes.fr/hal-01678857/document.
23. IBP (2015). WUFI® Pro Version 5.3, Fraunhofer Institute for Building Physics.
24. EN 12664 (2002). Thermal Performance of Building Materials and Products. Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods. Dry and Moist Products of Medium and Low Thermal Resistance, CEN.
25. ISO 12571 (2013). Hygrothermal Performance of Building Materials and Products. Determination of Hydroscopic Sorption Properties, International Organization for Standardization.
26. ISO 12572 (2016). Hygrothermal Performance of Building Materials and Products. Determination of Water Vapour Transmission Properties-Cup Method, International Organization for Standardization.
27. EN 1602 (2013). Thermal Insulating Products for Building Applications. Determination of the Apparent Density, CEN.
28. JISA 1470-1 (2002). Test Method of Adsorption/desorption Efficiency for Building Materials to Regulate an Indoor Humidity–Part 1: Response method of Humidity Japan, Japanese Standards Association.
29. ISO 24353 (2008). Hygrothermal Performance of Building Materials and Products. Determination of Moisture Adsorption/Desorption Properties in Response to Humidity Variation, International Organization for Standardization.
30. Padfied, T., and Jeansen, L. (2018, November 22). Humidity Buffering by Absorbent Materials. Available online: https://www.conservationphysics.org/ppubs/humidity_buffering_building_interiors_nsb2011.pdf.
31. Proposing ultimate moisture buffering value (UMBV) for characterization of composite porous mortars10.1016/j.conbuildmat.2015.02.058 ↗
32. DIN 18947 (2013). Earth Plasters–Terms and Definitions, Requirements, Test Methods, NABau. (In German).
33. Busser, T., Piot, A., Pailha, M., Bejat, T., and Woloszyn, M. (2016). From Materials Properties to Modelling Hygrothermal Transfers of Highly Hygroscopic Walls, CESBP. Available online: https://www.researchgate.net/publication/308266233_from_materials_properties_to_modelling_hygrothermal_transfers_of_highly_hygroscopic_walls.
34. Influence of moisture load profiles on moisture buffering potential and moisture residuals of three groups of hygroscopic materials10.1016/j.buildenv.2014.06.021 ↗
35. Moisture performance of building materials: From material characterization to building simulation using the Moisture Buffer Value concept10.1016/j.buildenv.2008.03.015 ↗
36. The moisture buffering capacity of unfired clay masonry10.1016/j.buildenv.2014.09.027 ↗
37. Characterization of flax lime and hemp lime concretes: Hygric properties and moisture buffer capacity10.1016/j.enbuild.2014.11.043 ↗
38. Design and properties of a new sustainable construction material based on date palm fibers and lime10.1016/j.conbuildmat.2018.06.196 ↗
39. Hygrothermal calculations and laboratory tests on timber-framed wall structures10.1016/S0360-1323(02)00207-X ↗
40. EN 15026 (2007). Hygrothermal Performance of Building Components and Building Elements—Assessment of Moisture Transfer by Numerical Simulation, CEN.
41. Numerical and experimental data set for benchmarking hygroscopic buffering models10.1016/j.ijheatmasstransfer.2010.03.039 ↗
42. An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data10.1016/j.ijheatmasstransfer.2007.03.025 ↗
43. Dynamic experimental method for identification of hygric parameters of a hygroscopic material10.1016/j.buildenv.2018.01.002 ↗