A Simulation of the Densification Process of NdFeB Bulks by a Modified Drucker–Prager Cap Model

During the sintering process of NdFeB bulks, temperature changes and significant temperature differences between the bulk interior and the surface region will produce high residual stress. Temperature field and stress field prediction during the sintering process is one of the key techniques for analyzing residual stress. Therefore, the sintering process simulation and residual stress prediction of NdFeB bulks under different sintering temperatures were conducted based on the modified Drucker–Prager cap (DPC) model in ABAQUS (ABAQUS 2024). The calculated field cloud charts were analyzed against the microstructure of the bulks observed by scanning electron microscope (SEM). The finite element analysis (FEA) results of the sintering process and the residual stress show good agreement with SEM morphologies, which validates the accuracy and predictability of the model. The results indicate that cracks predominantly formed in edge regions. As the sintering temperature increased, longitudinal compressive stress at the edge of the cross-section transitioned into tensile stress. These results indicate that the developed simulation framework effectively identifies crack-prone areas, enabling data-driven optimization to reduce experimental trial-and-error costs in engineering applications.