Exergy Analysis of the Discharge of Sensible Heat Thermal Energy Storage Systems: Granular Material vs. Solid Blocks
Source abstract
Abstract
Thermal energy storage (TES) systems are essential components of concentrating solar power (CSP) plants that enable uniform generation of green electricity and process heat. The performance of sensible heat TES systems based on granular material and on solid blocks was experimentally analyzed during the discharge process. A granular material TES system was studied in its operation as a regular fluidized bed and as a confined bed that restricted the motion of the granular material via mechanical confinement. The pressure drop required to circulate the heat transfer fluid (HTF) through the TES system made of alumina blocks was measured to be two orders of magnitude lower than that used in the granular material TES system, being uniform and close to 0.2 bar for operation of the fluidized bed and decreasing from 0.65 to 0.3 bar for the confined bed. The evolution of the exergy efficiency of the TES systems along the discharge process was determined by obtaining an inversed exponential reduction for the fluidized bed TES system, a parabolic reduction for the alumina block TES system, and a roughly uniform value for the confined bed TES system. The exergy efficiency of the confined bed TES system, considering the HTF pressure drop as a parasitic consumption of the plant, remained higher than 90% during the complete discharge process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Thermal and Fluids Engineering Department, University Carlos III of Madrid, Avda. de la Universidad 30, 28911 Leganés, Madrid, Spain
Department of Mechanical Engineering, Florida Polytechnic University, 4700 Research Way, Lakeland, FL 33805, USA
Funding
Spanish Government · USA–Spain Fulbright
References (52)
Show source-provided references
1. Thermal energy storage in concrete: A comprehensive review on fundamentals, technology and sustainability10.1016/j.jobe.2023.108302 ↗
2. Reducing the number of turbine starts in concentrating solar power plants through the integration of thermal energy storage10.1115/1.4028142 ↗
3. State of the art on high-temperature thermal energy storage for power generation. Part 2-Case studies10.1016/j.rser.2009.07.036 ↗
4. Review on sensible thermal energy storage for industrial solar applications and sustainability aspects10.1016/j.solener.2020.08.081 ↗
5. Potential of phase change materials and their effective use in solar thermal applications: A critical review10.1016/j.applthermaleng.2022.119417 ↗
6. Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications—A review10.1016/j.rser.2023.113904 ↗
7. Review of technology: Thermochemical energy storage for concentrated solar power plants10.1016/j.rser.2015.12.364 ↗
8. A thermochemical energy storage materials review based on solid-gas reactions for supercritical CO2 solar tower power plant with a Brayton cycle10.1016/j.est.2023.108906 ↗
9. State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
10. Thermal energy storage systems for concentrated solar power plants10.1016/j.rser.2017.03.139 ↗
11. Solid state sensible heat storage technology for industrial applications—A review10.1016/j.est.2023.106919 ↗
12. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
13. Molten chloride salt technology for next-generation CSP plants: Selection of cold tank structural material utilizing corrosion control at 500 °C10.1016/j.solmat.2023.112233 ↗
14. A thermo-economic methodology to select sCO2 power cycles for CSP applications10.1016/j.renene.2018.08.023 ↗
15. Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review10.1016/j.conbuildmat.2020.121398 ↗
16. Synthesis and characterization of activated alumina with high thermal stability by a low-heat solid-phase precursor method10.1016/j.micromeso.2022.111921 ↗
17. A review on sensible heat based packed bed solar thermal energy storage system for low temperature applications10.1016/j.solener.2020.07.027 ↗
18. Thermo-economic optimization of a novel thermal energy storage system based on granular material10.1016/j.applthermaleng.2023.120123 ↗
19. Experimental investigation of sand-based sensible heat energy storage system10.1016/j.applthermaleng.2024.125390 ↗
20. Assessment of different sands potentiality to formulate an effective thermal energy storage material (TESM)
21. Experimental Study of a Sand–Air Heat Exchanger for Use with a High- Temperature Solar Gas Turbine System10.1115/1.4007585 ↗
22. Study on characterization of river sand as heat storage medium10.17485/ijst/2016/v9i47/106448 ↗
23. Kunii, D., and Levenspiel, O. (1991). Fluidization Engineering, Butterworth Heinemann. [2nd ed.].
24. A review of solar thermal energy storage in beds of particles: Packed and fluidized beds10.1016/j.solener.2018.05.047 ↗
25. Experimental analysis of a novel confined bed system for thermal energy storage10.1016/j.est.2023.107972 ↗
26. Exergy recovery from solar heated particles to supercritical CO210.1016/j.applthermaleng.2018.10.009 ↗
27. Exergy analysis of packed and fluidized bed thermal energy storage systems10.1016/j.applthermaleng.2024.122436 ↗
28. Experimental study of the discharge process of a thermal energy storage system based on granular material operated as a fluidized or confined bed10.1016/j.est.2023.109173 ↗
29. Modeling sensible thermal energy storage in solid blocks for concentrating solar power10.1016/j.rineng.2023.101051 ↗
30. Fluid flow through packed columns
31. The effect of temperature on the distributor design in bubbling fluidized beds10.1016/j.powtec.2014.04.035 ↗
32. Evaluation of heat transfer models at various fluidization velocities for biomass pyrolysis conducted in a bubbling fluidized bed10.1016/j.ijheatmasstransfer.2020.120175 ↗
33. Experimental evaluation of the convection heat transfer coefficient of large particles moving freely in a fluidized bed reactor10.1016/j.ijheatmasstransfer.2020.119612 ↗
34. Leva, M. (1959). Fluidization, McGraw-Hill.
35. Lateral solids meso-mixing in pseudo-2D fluidized beds by means of TFM simulations10.1016/j.powtec.2018.04.061 ↗
36. Partitioning of a wide bubbling fluidized bed with vertical internals to improve local mixing and bed material circulation10.1016/j.powtec.2022.117771 ↗
37. Thermal energy storage in a fluidized bed of PCM10.1016/j.cej.2013.06.112 ↗
38. Energy storage with PCM in fluidized beds: Modeling and experiments10.1016/j.cej.2014.11.107 ↗
39. Fluidized bed reactors for solid-gas thermochemical energy storage concepts—Modelling and process limitations10.1016/j.energy.2017.11.065 ↗
40. Heat storage and release characteristics of a prototype CaCO3/CaO thermochemical energy storage system based on a novel fluidized bed solar reactor10.1016/j.jclepro.2024.142003 ↗
41. High-temperature thermal storage using a packed bed of rocks—Heat transfer analysis and experimental validation10.1016/j.applthermaleng.2010.10.034 ↗
42. Experimental and numerical study on the thermocline behavior of packed-bed storage tank with sensible fillers10.1016/j.renene.2023.03.107 ↗
43. A perturbation model for stratified thermal energy storage tanks10.1016/j.ijheatmasstransfer.2014.03.071 ↗
44. Algebraic model for thermocline thermal storage tank with filler material10.1016/j.solener.2015.10.047 ↗
45. Sánchez-Gongález, A., Jiménez-Montero, I., and Soria-Verdugo, A. (Appl. Therm. Eng., 2025). Experimental discharge analysis of a high-temperature thermal energy storage system made of alumina blocks, Appl. Therm. Eng., in press.10.1016/j.applthermaleng.2025.125653 ↗
46. A numerical study of geopolymer concrete thermal energy storage: Benchmarking TES module design and optimizing thermal performance10.1016/j.est.2023.109389 ↗
47. Thermal energy storage in concrete: Review, testing, and simulation of thermal properties at relevant ranges of elevated temperature10.1016/j.cemconres.2023.107096 ↗
48. Thermal energy storage with supercritical carbon dioxide in a packed bed: Modeling charge-discharge cycles10.1016/j.supflu.2018.03.009 ↗
49. Thermocline in packed bed thermal energy storage during charge-discharge cycle using recycled ceramic materials—Commercial scale designs at high temperature10.1016/j.est.2023.107209 ↗
50. Evaluation of minimum fluidization velocity in gas fluidized beds from pressure fluctuations10.1080/00986448508911219 ↗
51. System analysis and test loop design for the CellFlux storage concept10.1016/j.egypro.2014.03.110 ↗
52. Assessment of the impact of thermal energy storage operation strategy on parabolic trough solar power plant performance10.1016/j.renene.2022.11.119 ↗