journal article·2023-08-21Open access

Thermal-Hydraulic Modeling of Oil-Immersed Motor Pump

Junqiang Shi, Ziyang Li, Jingcheng Gao, Dongjing Chen, Xiaotao Li, Ying Li, Jin Zhang, Xiangdong Kong

Applied Sciences· Volume 13· Issue 16

Abstract

The integrated design of the motor and axial piston pump eliminates the coupling structure, resulting in a compact and lightweight motor-pump structure. The challenge of motors overheating has always been a major concern. To address this issue, the hydraulic oil throughout the motor pump is utilized for cooling the high-speed motor, effectively improving the power density and heat dissipation capability of the hydraulic power unit. This integrated design approach has successfully resolved the significant issue of overheating motors, leading to enhanced performance of the hydraulic power unit. To address this concern, the entire motor pump’s oil is utilized to cool the high-speed motor. Consequently, the thermodynamic prediction of high-speed motor pumps has become increasingly important. In this study, the impact of motor heat generation on hydrodynamics is analyzed, and the heat transfer of the motor pump is investigated using the control volume method. Furthermore, thermodynamic models of hysteresis loss, eddy current loss, alternating current loss, churning loss, and throttling loss are established for the oil-immersed motor pump. The change in oil viscosity is also considered. The instantaneous temperature change rule of the oil within the oil-immersed motor pump is derived. Additionally, the influence of various working conditions such as pressure and speed on the temperature of the motor pump’s key node is examined. The experimental results indicate the accuracy of the thermodynamic calculation, and the significant effect of motor loss on the leakage temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electric Motor Design and Analysis · Hydraulic and Pneumatic Systems · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Machinery Industry Automation Research Institute Co., Ltd., Beijing 100120, China

College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China

Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Qinhuangdao 066004, China

National & Local Joint Engineering Research Center for Advanced Manufacture Forming Technology and Equipment, Qinhuangdao 066004, China

China Key Laboratory of Advanced Forging & Stamping Technology and Science, Yanshan University, Qinhuangdao 066004, China

Funding

National key research and development program · General Program of National Natural Science Foundation of China · Youth Fund of the National Natural Science Foundation of China

References (22)

Show source-provided references
1. Zhao, J., Fu, J., Li, Y., Qi, H., Wang, Y., and Fu, Y. (2022). Flow characteristics of integrated motor-pump assembly with phosphate ester medium for aerospace electro-hydrostatic actuators. Chin. J. Aeronaut.10.1016/j.cja.2022.11.013 ↗
2. Review of More Electric Engines for Civil Aircraft10.1007/s42405-022-00469-0 ↗
3. Hydraulic piston pump in civil aircraft: Current status, future directions and critical technologies10.1016/j.cja.2019.01.013 ↗
4. Ehresman, J.D. (2009). Integration of Actuators and Sensors into Composite Structures. [Ph.D. Thesis, College of Engineering, Montana State University-Bozeman].
5. Capped piston: A promising design to reduce compressibility effects, pressure ripple and cavitation for high-speed and high-pressure axial piston pumps10.1016/j.aej.2022.07.048 ↗
6. Effect of toothless stator design and core and stator conductors eddy current losses in permanent magnet generators10.1109/60.124565 ↗
7. Inderka, R.B., Carstensen, C., and De Doncker, R. (2002, January 23–27). Eddy currents in medium power switched reluctance machines. Proceedings of the 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No. 02CH37289), Cairns, QLD, Australia.
8. Mellor, P.H., Wrobel, R., and McNeill, N. (2006, January 8–12). Investigation of proximity losses in a high speed brushless permanent magnet motor. Proceedings of the Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, Tampa, FL, USA.10.1109/IAS.2006.256730 ↗
9. Calculation of eddy current loss in axial field permanent-magnet machine with coreless stator10.1109/TEC.2004.832043 ↗
10. Churning losses analysis on the thermal-hydraulic model of a high-speed electro-hydrostatic actuator pump10.1016/j.ijheatmasstransfer.2018.06.133 ↗
11. Thermal-hydraulic model for axial piston pump with leakage and friction and its application10.1108/ILT-02-2018-0085 ↗
12. Die ferromagnetischen Konstanten für schwache Wechselfelder
13. Direct relation between hysteresis and dynamic losses in soft magnetic materials
14. General properties of power losses in soft ferromagnetic materials10.1109/20.43994 ↗
15. Numerical simulation and analysis of temperature and flow field of high-speed axial piston motor pump10.1049/joe.2018.8959 ↗
16. Loss calculation and thermal analysis of ultra-high speed permanent magnet motor10.1016/j.heliyon.2022.e11350 ↗
17. Thermal analysis of duplex three-phase induction motor under fault operating conditions10.1109/TIA.2013.2258392 ↗
18. Modeling and investigation of thermal characteristics of a water-cooled permanent-magnet linear motor10.1109/TIA.2014.2365198 ↗
19. Multi-physics design of a novel turbine permanent magnet generator used for downhole high-pressure high-temperature environment10.1049/iet-epa.2012.0172 ↗
20. Electrical–thermal modeling of a double-canned induction motor for electrical performance analysis and motor lifetime determination10.1007/s00202-020-01062-y ↗
21. Wang, S., Luo, G., Shen, H., and Yao, Z. (2016, January 11–17). Heat transfer behavior of the boundary layer near surfaces in annular flow of high capacity canned motor pump. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Phoenix, AZ, USA.10.1115/IMECE2016-66671 ↗
22. Elhomdy, E., Liu, Z., and Li, G. (2019). Thermal and mechanical analysis of a 72/48 switched reluctance motor for low-speed direct-drive mining applications. Appl. Sci., 9.10.3390/app9132722 ↗