journal article·2019-07-31Open access

Numerical Study on Thermal Design of a Large-Area Hot Plate with Heating and Cooling Capability for Thermal Nanoimprint Lithography

Gyujin Park, Changhee Lee

Applied Sciences· Volume 9· Issue 15

Abstract

A numerical study is conducted on the thermal performance of a large-area hot plate specifically designed as a heating and cooling tool for thermal nanoimprint lithography processes. The hot plate has the dimensions 240 mm × 240 mm × 20 mm, in which a series of cartridge heaters and cooling holes are installed. Stainless steel has been selected to endure the high molding pressures. A numerical model based on ANSYS Fluent is employed to predict the thermal behavior of the hot plate in both the heating and cooling phases. The proportional–integral–derivative (PID) thermal control of the device is modeled by adding user defined functions. The results of the numerical computations demonstrate that the use of cartridge heaters provides sufficient heat-up performance and the active liquid cooling in the cooling holes provides the required cool-down performance. However, a crucial technical issue is raised, namely that the proposed design poses a large temperature non-uniformity in the steady heating phase and in the transient cooling phase. As a remedy, a new hot plate in which heat pipes are installed in the cooling holes is considered. The numerical results show that the installation of heat pipes could enhance the temperature uniformity both in the heating and cooling phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Advancements in Photolithography Techniques · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

HSD engine Ltd., Changwon 51574, Korea

Department of Mechanical and Shipbuilding Convergence Engineering, Pukyung National University, Busan 48547, Korea

References (39)

Show source-provided references
1. May, G.S., and Sze, S.M. (2003). Fundamentals of Semiconductor Fabrication, John Wily & Sons.
2. Nanoimprint Lithography10.1116/1.588605 ↗
3. Nano-scale patterning using the roll typed UVnanoimprint lithography tool10.1016/j.mee.2007.12.059 ↗
4. Large-area roll-to-roll and roll-to-plate Nanoimprint Lithography: A step toward high-throughput application of continuous nanoimprinting10.1021/nn9003633 ↗
5. Fabrication of high-aspect-ratio pattern via high throughput roll-to-roll ultraviolet nanoimprint lithography10.1016/j.mee.2013.03.117 ↗
6. Polymer imprint lithography with molecular-scale resolution10.1021/nl048355u ↗
7. Study on two-stage hot embossing microreplication: Silicon to polymer to polymer
8. Deposition of anti-adhesive ultra-thin teflon-like films and their interaction with polymers during hot embossing10.1016/S0169-4332(99)00014-8 ↗
9. Imprint of sub-25 nm vias and trenches in polymers10.1063/1.114851 ↗
10. Prototype development of a roller imprint system and its application to large area polymer replication for a microstructured optical device10.1016/j.jmatprotec.2007.08.069 ↗
11. Ultrafast patterning of nanostructures in polymers using laser assisted nanoimprint lithography10.1063/1.1630162 ↗
12. Study on Nanoimprint Formability Considering the Anti-adhesion Layer for (CH2)n Polymer by Molecular Dynamics Simulation10.2174/157341312800620269 ↗
13. Directed Assembly of Nanoparticles onto Polymer-Imprinted or Chemically Patterned Templates Fabricated by Nanoimprint Lithography10.1002/adma.200501072 ↗
14. Thermal roll to roll nanoimprint lithography for micropillars fabrication on thermoplastics10.1016/j.mee.2018.02.026 ↗
15. Andrews, D., Lipson, R., and Nann, T. (2019). Nanoimprint Lithography for Nanomanufacturing. Comprehensive Nanoscience and Nanotechnology, Academic Press. [2nd ed.].
16. Hot embossing as a method for the fabrication of polymer high aspect ratio structures10.1016/S0924-4247(00)00296-X ↗
17. Roller nanoimprint lithography
18. Ultrafast direct imprinting of nanostructures in metals by pulsed laser melting10.1088/0957-4484/21/4/045303 ↗
19. Experimental study of polymer microlens fabrication using partial-filling hot embossing technique10.1016/j.mee.2016.05.009 ↗
20. Fabrication of a micro patterned parylene-C master by hot-embossing and its application to metallic mold replication10.1088/0960-1317/17/7/024 ↗
21. Continuous ultraviolet roll nanoimprinting process for replicating large-scale nano-and micropatterns10.1063/1.2392960 ↗
22. Fabrication of antireflection structure film by roll-to-roll ultraviolet nanoimprint lithography
23. Ultrafast and direct imprint of nanostructures in silicon10.1038/nature00792 ↗
24. Direct nano-printing on Al substrate using a SiC mold
25. Study of the Resist Deformation in Nanoimprint Lithography10.1116/1.1415510 ↗
26. A study of resist flow during nanoimprint lithography10.1016/j.mee.2004.12.083 ↗
27. High flowability monomer resists for thermal nanoimprint lithography10.1016/j.mee.2009.01.014 ↗
28. Improving Stamps or 10 nm Level Wafer Scale Nanoimprint Lithography10.1016/S0167-9317(02)00464-1 ↗
29. Fast thermal nanoimprint lithography by a stamp with integrated heater10.1016/j.mee.2008.01.065 ↗
30. Khang, D.Y., Kang, H., Kim, T., and Lee, H.H. (2004). Low-Pressure Nanoimprint Lithography. Nano Lett., 633–637.10.1021/nl049887d ↗
31. Room-temperature and low-pressure nanoimprint lithography10.1016/S0167-9317(02)00485-9 ↗
32. Kwak, H.S., Park, G.J., Son, B.C., Lee, J.J., and Park, H.C. (2006, January 18–21). Design of a Hot plate with Rapid Cooling Capability or Thermal Nanoimprint Lithography. Proceedings of the 2006 SICE-ICASE International Joint Conference, Busan, Korea.10.1109/SICE.2006.314808 ↗
33. Park, G.J., Kwak, H.S., Shin, D.W., and Lee, J.J. (2007, January 4). Numerical Simulation of Thermal Control of a Hot Plate for Thermal Nanoimprint Lithography Machines. Proceedings of the 3rd International Conference on Heating Cooling Technology, Seoul, Korea.
34. Thermal nanoimprint lithography using fluoropolymer mold10.1016/j.mee.2012.07.007 ↗
35. Development of turbulence models for shear flows by a double expansion technique10.1063/1.858424 ↗
36. Yang, J.H. (2008). An Experimental Study on the Thermal Performance of a Hot Plate for Thermal Nanoimprint Lithography. [Ph.D. Thesis, Kumoh National Institute of Technology].
37. Faghri, A. (1995). Heatpipe Science and Technology, Taylor & Francis.
38. Wallin, P. (2012). Heat Pipe: Selection of Working Fluid, MVK160. Heat and Mass Trasfer Project Report.
39. Cengel, Y.A. (2012). Heat and Mass Transfer, McGraw-Hill.