journal article·2024-09-12Open access

Comprehensive Cost–Energy Evaluation of Wall Insulation for Diverse Orientations and Seasonal Usages

Ahmet Serhan Canbolat

Applied Sciences· Volume 14· Issue 18

Abstract

An optimization study on thermal insulation applied to building exteriors has been performed in this research. Solar radiation has been considered while obtaining optimum insulation thicknesses for various directions. Analyses have been conducted not only for the cardinal directions (south, north, west, and east) but also for the intermediate directions (southeast, northeast, northwest, and southwest). Solar radiation received by vertical walls and cooling and heating degree day values have been computed according to directions. This research examines the most suitable insulation thicknesses for different seasonal usage scenarios, considering cooling, heating, and annual energy demands. Variations in energy cost savings, savings rates, payback periods, seasonal energy demands, and optimum insulation thicknesses for various wall orientations have been presented. Additionally, correlations providing the total cost based on the applied insulation thickness for each direction and various building usage scenarios have been determined. The results indicate that incoming solar radiation varies from 52.08 W/m2 to 111.82 W/m2 across different wall orientations, while energy cost savings range from 23.48 USD/m2 to 24.56 USD/m2, with savings rates between 69.8% and 70.3%. Payback periods range from 5.94 to 6.05 years. Depending on the wall orientation, optimum insulation thicknesses vary between 4.52 and 5.02 cm for heating, 1.56 and 2.09 cm for cooling, and 5.92 and 6.08 cm for annual energy requirements. The heating energy demands ranged from 54.8 MJ/m2 to 58.38 MJ/m2, while the cooling energy demands varied between 10.91 MJ/m2 and 12.08 MJ/m2, depending on the wall orientation. It has been concluded that the ideal insulation thicknesses for meeting cooling, heating, and annual energy demands vary depending on the wall orientation and the building’s use purpose.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Building Energy and Comfort Optimization · Urban Heat Island Mitigation · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Engineering Faculty, Bursa Uludag University, 16059 Bursa, Türkiye

References (36)

Show source-provided references
1. (2024, September 08). Trading Economics. Available online: https://tradingeconomics.com/commodity/natural-gas.
2. (2024, May 15). International Energy Agency. Available online: https://www.iea.org/topics/global-energy-crisis.
3. Parametric investigation of optimum thermal insulation thickness for external walls10.3390/en4060913 ↗
4. Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate10.1016/j.enconman.2012.10.002 ↗
5. Investigation of parameters affecting the optimum thermal insulation thickness for buildings in hot and cold climates10.2298/TSCI181105068C ↗
6. Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey’s provincial centers10.1016/j.enbuild.2016.03.004 ↗
7. Determination of Indoor Design Temperature, Thermal Characteristics and Insulation Thickness Under Hot Climate Conditions
8. A review of the economical and optimum thermal insulation thickness for building applications10.1016/j.rser.2011.08.006 ↗
9. Influence of degree days calculation methods on the optimum thermal insulation thickness in life-cycle cost analysis for building envelopes in Mediterranean and Semi-Arid climates10.1016/j.jobe.2023.107783 ↗
10. Albatayneh, A. (2021). Optimising the Parameters of a Building Envelope in the East Mediterranean Saharan, Cool Climate Zone. Buildings, 11.10.3390/buildings11020043 ↗
11. Analysis of optimum insulation thickness for external walls at different orientations based on real-time measurements10.2298/TSCI180710311O ↗
12. The determination of the most economical combination between external wall and the optimum insulation material in Cameroonian’s buildings10.1016/j.jobe.2016.12.008 ↗
13. Enhancing energy efficiency and cost-effectiveness while reducing CO2 emissions in a hospital building10.1016/j.jobe.2023.107792 ↗
14. Altun, A.F. (2022). Determination of Optimum Building Envelope Parameters of a Room concerning Window-to-Wall Ratio, Orientation, Insulation Thickness and Window Type. Buildings, 12.10.3390/buildings12030383 ↗
15. Yuan, J., Farnham, C., and Emura, K. (2017). Optimum insulation thickness for building exterior walls in 32 regions of China to save energy and reduce CO2 Emissions. Sustainability, 9.10.3390/su9101711 ↗
16. Gigasari, A.R., Cárcel-Carrasco, J., Palermo Iglesias, L.M., and Amani, N. (2023). Evaluating carbon payback time by optimizing insulation materials for different orientations: A cradle-to-gate life cycle assessment. Energy Environ.10.1177/0958305X231193871 ↗
17. Xu, H., Ding, J., Li, T., Mu, C., Gu, X., and Wang, R. (2022). A Study on Optimum Insulation Thickness in Walls of Chinese Solar Greenhouse for Energy Saving. Agronomy, 12.10.3390/agronomy12051104 ↗
18. Akan, A.E. (2021). Determination and Modeling of Optimum Insulation Thickness for Thermal Insulation of Buildings in All City Centers of Turkey, Springer.10.1007/s10765-021-02799-9 ↗
19. The effect of water vapor diffusion resistance factor of insulation materials for outer walls on condensation
20. An integrated assessment of the financial and environmental impacts of exterior building insulation application10.1016/j.jclepro.2023.140376 ↗
21. Applying recent efficient numerical methods for long-term simulations of heat transfer in walls to optimize thermal insulation10.1016/j.rineng.2023.101476 ↗
22. Canbolat, A.S., and Albak, E.İ. (2024). Multi-Objective Optimization of Building Design Parameters for Cost Reduction and CO2 Emission Control Using Four Different Algorithms. Appl. Sci., 14.10.3390/app14177668 ↗
23. A study on residential heating energy requirement and optimum insulation thickness10.1016/j.renene.2007.07.001 ↗
24. Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey10.1016/j.buildenv.2007.02.014 ↗
25. Cengel, Y. (2002). Heat Transfer: A Practical Approach, McGraw-Hill. [2nd ed.].
26. Duffie, J.A., Beckman, W.A., and Blair, N. (1991). Solar Engineering of Thermal Processes, John Wiley & Sons.
27. Kilic, A., and Ozturk, A. (1983). Solar Energy, Kipas Distribution Inc.. (In Turkish).
28. Yiğit, A., and Atmaca, İ. (2010). Solar Energy, Alfa Aktüel. (In Turkish).
29. Diffuse solar radiation correlations: Applications to Turkey and Australia10.1016/0360-5442(95)00022-9 ↗
30. (2024, April 05). Central Bank of Türkiye, Available online: https://www.tcmb.gov.tr.
31. Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey10.1016/j.applthermaleng.2005.10.019 ↗
32. Optimum Thermal Insulation Thicknesses and Payback Periods for Building Walls in Turkey
33. A study on the optimum insulation thicknesses of various types of external walls with respect to different materials, fuels and climate zones in Turkey10.1016/j.apenergy.2011.10.008 ↗
34. Calculation of optimum insulation thickness of external walls in residential buildings by using exergetic life cycle cost assessment method: Case study for Turkey10.1002/ep.13232 ↗
35. (2013). Thermal Insulation Requirements for Buildings (Standard No. TS 825).
36. Determinatıon of Optimum Thermal Insulation Thickness Considering Solar Radiation and Wall Orientation