Simulation and Optimisation of Utility-Scale PV–Wind Systems with Pumped Hydro Storage

Based on economic feasibility, renewable generators can use pumped hydro storage (PHS) to improve their profitability by performing energy arbitrage under real-time pricing (RTP) schemes. In this paper, we present a new method to optimise the size of and manage utility-scale wind–PV systems using PHS with energy arbitrage under RTP. PHS is used to supply load consumption and/or energy arbitrage. Further, both load-supply and power-generating systems are considered, and a genetic algorithm metaheuristic technique is used to perform the optimisation efficiently. Irradiance, wind speed, temperature, hourly electricity price, component characteristics, and financial data are used as data, and the system is simulated in 15 min time steps during the system lifetime for each combination of components and control variables. Uncertainty is considered for the meteorological data and electricity prices. The pump and turbine efficiencies and available head and penstock losses are considered as variables (not fixed values) to obtain accurate simulations. A sample application in Spain is demonstrated by performing a sensitivity analysis of different locations, electricity prices, and costs. PHS is not worth considering with the present cost of components. In load-supply systems in Zaragoza (Spain), we found that PHS would be worth considering if its cost was lower than 850 EUR/kW (considering all PHS components except reservoirs) +20 EUR/m3 for reservoirs (equivalent to 105 EUR/kWh with a 70 m head), whereas in Gran Canaria Island (with a considerably higher irradiation and wind speed), the required PHS cost is considerably lower (~350 EUR/kW + 10 EUR/m3). For power-generating systems, PHS required costs ranging from 400–700 EUR/kW + 15–20 EUR/m3 for obtaining the optimal PV–wind–PHS system with economic results similar to those of the optimal power-generating system without PHS. Thus, the renewable–PHS system with energy arbitrage under RTP could be profitable for many locations globally given the wide range of the PHS cost; however, each case is different and must be evaluated individually. The presented model can be used for optimising the renewable–PHS system in any location with any costs and RTP schemes.