Prognostics and Health Management Based on Next-Generation Technologies: A Literature Review
Source abstract
Abstract
With the rapid development of science and technology, the integration and complexity of aerospace vehicles, weaponry, and large-scale chemical equipment are becoming higher and higher. PHM plays an important role in realizing reductions in equipment loss due to failures in many fields. In order to systematically sort through the research history of PHM and deeply analyze the development status of AR and DT technologies in the field of PHM, to clarify the current technical challenges and future development directions and to provide valuable references and insights for researchers, engineers, and decision-makers in the related fields, this paper summarizes the development of PHM in the engineering field. This paper summarizes the development of PHM in the field of engineering, from the initial PHM used in aerospace to the current PHM systems supported by various advanced technologies; analyzes the advantages and shortcomings of the digital twin and augmented reality technologies used for PHM; and organizes and summarizes the future directions and future research focuses of PHM research based on the existing technologies (mainly digital twins and augmented reality). After systematic research and study, we found that the integration of augmented reality and digital twin technologies will provide superb simulation capabilities and immersive operation and bring new challenges and opportunities. Therefore, it is also imperative to address the challenges and limitations that hinder the seamless integration of the new technologies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Quality and Safety in Healthcare · Digital Transformation in Industry · Biomedical and Engineering Education
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
Beijing Institute of Spacecraft System Engineering, Beijing 100094, China
China Special Equipment Inspection and Research Institute, Beijing 100029, China
Funding
Elevator Typical Failure and Accident Prevention and Control Multi-dimensional Twinning Co-Intelligence Technology and Application Demonstration · Centralized University Talent Projects · Science and Technology Program of the State Administration for Market Regulation
References (46)
Show source-provided references
1. Nickerson, B., and Lally, R. (2001, January 10–17). Development of a smart wireless networkable sensor for aircraft engine health management. Proceedings of the 2001 IEEE Aerospace Conference Proceedings, Big Sky, MT, USA.
2. Page, M.J., McKenzie, J.E., Bossuyt, P.M., Boutron, I., Hoffmann, T.C., Mulrow, C.D., Shamseer, L., Tetzlaff, J.M., Aki, E.A., and Brennan, S.E. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. PLoS Med., 18.10.31222/osf.io/v7gm2 ↗
3. Zhang, G., and Vachtsevanos, G. (2007, January 3–10). A Methodology for Optimum Sensor Localization/Selection in Fault Diagnosis. Proceedings of the 2007 IEEE Aerospace Conference, Big Sky, MT, USA.10.1109/AERO.2007.352878 ↗
4. Zhi, H. (2010). Research on Failure Prediction and Health Management Technology for Unmanned Aerial Vehicles. [Master’s Thesis, Beijing University of Chemical Technology].
5. Miniature MEMS-based data recorder for prognostics and health management (PHM)10.1109/MIM.2011.5961365 ↗
6. Aircraft Maintenance Decision System Based on Real-time Condition Monitoring10.1016/j.proeng.2012.01.038 ↗
7. System Phm Algorithm Maturation
8. Jiang, M., Fu, G., Wang, D., and Zhang, D. (2015, January 21–23). Using failure analysis techniques to identify key information of PHM. Proceedings of the 2015 Prognostics and System Health Management Conference: IEEE 2015 Prognostics and System Health Management Conference (2015 PHM Beijing), Beijing, China.
9. Yang, L., Wang, J., and Zhang, G. (2016, January 20–22). Aviation PHM system research framework based on PHM big data center. Proceedings of the 2016 IEEE International Conference on Prognostics and Health Management (ICPHM 2016), Ottawa, ON, Canada.10.1109/ICPHM.2016.7542824 ↗
10. Remadna, I., Terrissa, S.L., Zemouri, R., and Ayad, S. (2018, January 22–25). An overview on the deep learning based prognostic. Proceedings of the 2018 International Conference on Advanced Systems and Electric Technologies: IC_ASET 2018, Hammamet, Tunisia.10.1109/ASET.2018.8379858 ↗
11. Ayad, S., Terrissa, L.S., and Zerhouni, N. (2018, January 22–25). An IoT approach for a smart maintenance. Proceedings of the 2018 International Conference on Advanced Systems and Electric Technologies: IC_ASET 2018, Hammamet, Tunisia.10.1109/ASET.2018.8379861 ↗
12. Bai, X., Wang, W., Jia, X.-J., and Wang, G. (2017, January 9–12). Health Status Monitor of Aerospace Payload Based on Neural Network and Fuzzy Classification. Proceedings of the 2017 Prognostics and System Health Management Conference: PHM-Harbin 2017, Harbin, China.10.1109/PHM.2017.8079251 ↗
13. Digital twin driven prognostics and health management for complex equipment10.1016/j.cirp.2018.04.055 ↗
14. Neural Network based Aircraft Engine Health Management using C-MAPSS Data
15. Remaining useful life prediction of bearings with different failure types based on multi-feature and deep convolution transfer learning10.17531/ein.2021.4.11 ↗
16. Virtual Data Generation and Development of RF Module Fault Analysis Tool for PHM Application10.33162/JAR.2022.9.22.3.248 ↗
17. Yu, Y.-C., Chuang, S.-W., Shuai, H.-H., and Lee, C.-Y. (2022, January 1–3). Fast Adaption for Multi Motor Anomaly Detection via Meta Learning and deep unsupervised learning. Proceedings of the IEEE 31st International Symposium on Industrial Electronics (ISIE), Anchorage, AK, USA.10.1109/ISIE51582.2022.9831559 ↗
18. About The Importance of Autonomy and Digital Twins for the Future of Manufacturing10.1016/j.ifacol.2015.06.141 ↗
19. Boschert, S., and Rosen, R. (2016). Digital twin-the simulation aspect. Mechatronic Futures, Springer.10.1007/978-3-319-32156-1_5 ↗
20. Digital Twin in Industry: State-of-the-Art10.1109/TII.2018.2873186 ↗
21. Prognostics and health management of FAST cable-net structure based on digital twin technology10.1088/1674-4527/20/5/67 ↗
22. Gu, J. Research on Key Technology of Fault Prediction and Health Management of High-Speed Rolling Stock Based on Big Data. Doctoral Thesis, Dalian Jiaotong University; Dalian, China.2021.
23. Yang, J. (2022). Research on PHM Method of Rutting Machine Based on Digital Twins. [Master’s Thesis, Beijing Jiaotong University].
24. Han, W., Cheng, L., Han, W., and Yang, L. (2022). A Review of Digital Twin-Driven Rocket Control System Fault Diagnosis Research. Comput. Meas. Control, 30.
25. Zhu, X., Yan, Z., Yang, C., and Sun, J. (2023). Progress of PHM-oriented civil aircraft flight data analysis and application research. Meas. Control Technol., 42.
26. Xu, Y. (2018). Augmented Reality Assisted Civilian Failure Diagnosis and Maintenance Technology Research. Technol. Horiz., 7–8.
27. Zhao, B., Liu, F., and Xiang, C. (2016). Overview of advances in aerospace virtual assembly and virtual maintenance. Missile Space Launch Technol., 53–57.
28. Potential applications of augmented reality in human spaceflight engineering
29. Orlosky, J., Kim, P., Kiyokawa, K., Mashita, T., Ratsamee, P., Uranishi, Y., and Takemura, H. (2017, January 9–13). VisMerge: Light Adaptive Vision Augmentation via Spectral and Temporal Fusion of Non-visible Light. Proceedings of the 16th IEEE International Symposium on Mixed and Augmented Reality (ISMAR), Nantes, France.10.1109/ISMAR.2017.19 ↗
30. Abdelnaby, M., Abd Elazem, T., Aly, H.A., and Kaboudan, A. (2017, January 17–19). Augmented Reality Maintenance Training with Intel Depth Camera. Proceedings of the International Conference on Machine Vision and Information Technology (CMVIT), Singapore.10.1109/CMVIT.2017.9 ↗
31. Malta, A., Mendes, M., and Farinha, T. (2021). Augmented Reality Maintenance Assistant Using YOLOv5. Appl. Sci., 11.10.3390/app11114758 ↗
32. Qian, K., Zhang, X., Yu, H., and Ma, X. (2018, January 18–21). Industrial Maintenance and Assembly Guidance using a Markerless AR System with Monocular Camera. Proceedings of the 15th International Conference on Control, Automation, Robotics and Vision (ICARCV), Singapore.10.1109/ICARCV.2018.8581087 ↗
33. Visual recognition of aircraft mechanical parts for smart maintenance10.1016/j.compind.2017.01.001 ↗
34. Dandachi, G., Assoum, A., Elhassan, B., and Dornaika, F. (May, January 29). Machine Learning Schemes in Augmented Reality for Features Detection. Proceedings of the International Conference on Digital Information and Communication Technology and its Applications (DICTAP), Beirut, Lebanon.
35. Optimization of SLAM algorithm based on RGB-D camera
36. Zenati-Henda, N., Bellarbi, A., Benbelkacem, S., and Belhocine, M. (2014, January 14–16). Augmented reality system based on hand gestures for remote maintenance. Proceedings of the International Conference on Multimedia Computing and Systems (ICMCS), Marrakech, Morocco.10.1109/ICMCS.2014.6911258 ↗
37. Wang, L., Tang, D., Liu, C., Nie, Q., Wang, Z., and Zhang, L. (2022). An Augmented Reality-Assisted Prognostics and Health Management System Based on Deep Learning for IoT-Enabled Manufacturing. Sensors, 22.10.3390/s22176472 ↗
38. Augmented Reality-Based Modeling and Multi-View Interaction for Digital Twin Machining Systems
39. Augmented reality multiplayer collaborative assembly based on digital twins
40. Imagineering on Augmented Reality and Digital Twin for Digital Competence
41. Augmented reality and digital twin system for interaction with construction machinery10.1080/13467581.2020.1869557 ↗
42. Real-time Mixed Reality (MR) and Artificial Intelligence (AI) object recognition integration for digital twin in Industry 4.010.1016/j.iot.2023.100753 ↗
43. A enhanced interaction framework based on VR, AR and MR in digital twin10.1016/j.procir.2019.04.103 ↗
44. Development of a Virtual Reality Model Using Digital Twin for Real-Time Data Analysis10.1007/s42979-023-01928-5 ↗
45. Begout, P., Kubicki, S., Bricard, E., and Duval, T. (2022). Augmented Reality Authoring of Digital Twins: Design, Implementation and Evaluation in an Industry 4.0 Context. Front. Virtual Real., 3.10.3389/frvir.2022.918685 ↗
46. Human-centric collaborative assembly system for large-scale space deployable mechanism driven by Digital Twins and wearable AR devices10.1016/j.jmsy.2022.11.007 ↗