Effect of Lithium Mica Slag on the Internal Sulfate Attack of Cement Mortar

Lithium mica slag is a byproduct acquired via the sulfate method of lithium extraction, and it contains a certain quantity of soluble sulfates. The improper storage of lithium mica slag not only takes up a large amount of land resources, but also poses a threat in terms of environmental pollution. Therefore, this study aimed to investigate the mechanism by which SO42− dissolves in lithium mica slag, along with the impacts of internal sulfate attacks on mortar specimens with 10%, 20%, and 30% lithium mica slag contents. Testing was carried out in terms of the expansion, mass change, flexural and compressive strengths, porosity, composition, and contents of the products. It was determined that a significant quantity of SO42− was generated in mortar specimens with lithium mica slag. The mortar specimens mixed with lithium mica slag produced more ettringite (AFt: 3CaO·Al2O3·3CaSO4·32H2O), which is the product of internal sulfate attacks. This demonstrates that there was an internal sulfate reaction in the mortar specimens mixed with lithium mica slag. The internal sulfate reaction in mortar samples with lithium mica slag was finished in the later stages. It is noteworthy that the reaction did not lead to any cracking or damage; instead, it later allowed for a retention of strength that was equivalent to the strength of mortar specimens without lithium mica slag. In addition, the partial replacement of cement with lithium mica slag not only reduced the environmental pollution caused by soluble sulfates in lithium mica slag, but also reduced the use of cement and, thus, lowered costs.