Quantitative Detection for Fatigue Natural Crack in Aero-Aluminum Alloy Based on Pulsed Eddy Current Technique
Source abstract
Abstract
Aero-space aluminum alloys, as vital materials in aerospace engineering, find extensive application in various aerospace components. However, prolonged usage often leads to the emergence of fatigue natural cracks, posing significant safety risks. Therefore, research on accurate quantitative detection techniques for the cracks in aerospace-aluminum alloys is of vital importance. Firstly, based on the three-points bending experimental model, this paper prepared the fatigue natural crack specimen, and the depth of the natural crack is calibrated. Then, given the complexity of geometric characteristics inherent in natural cracks, the pulsed eddy current signal under the different natural crack depth is acquired and analyzed using an experimental study. Finally, to better exhibit the non-linearity between PEC signal and crack depth, a GA-based BPNN algorithm is proposed. The Latin Hypercube method is considered to optimize the population distribution in the genetic algorithm. The results indicate that the characterization accuracy reaches 2.19% for the natural crack.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
Funding
National Nature Science Foundation of China · Sichuan Science and Technology Program · Open Fund of Key Laboratory of Traction Power
References (24)
Show source-provided references
1. Determination of the fatigue crack-growth rate from the fractographic analysis of a specimen representing the aircraft wing skin10.1016/j.ijfatigue.2008.06.008 ↗
2. Flight-by-flight fatigue crack growth life assessment10.1016/j.ijfatigue.2007.01.029 ↗
3. A study of fatigue crack growth of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.09.006 ↗
4. Shiraiwa, T., Briffod, F., and Enoki, M. (2023). Prediction of Fatigue Crack Initiation of 7075 Aluminum Alloy by Crystal Plasticity Simulation. Materials, 16.10.3390/ma16041595 ↗
5. Fatigue crack growth and life prediction of 7075-T62 aluminium-alloy thin-sheets with low-velocity impact damage under block spectrum loading10.1016/j.ijfatigue.2021.106618 ↗
6. Zafar, M.H., Younis, H.B., Mansoor, M., Moosavi, S.K.R., Khan, N.M., and Akhtar, N. (2022). Training Deep Neural Networks with Novel Metaheuristic Algorithms for Fatigue Crack Growth Prediction in Aluminum Aircraft Alloys. Materials, 15.10.3390/ma15186198 ↗
7. Zhang, L., Deng, R., Ning, N., Fan, J., Wang, W., and Song, K. (2022). Study on Remote Field Eddy Current Testing Technology for Crack-like Defects in Long Truss Structure of Aircraft. Materials, 15.10.3390/ma15155093 ↗
8. Mandache, C., Desnoyers, R., and Bombardier, Y. (2022). Crack Growth Monitoring with Structure-Bonded Thin and Flexible Coils. Sensors, 22.10.3390/s22249958 ↗
9. Novel phase reversal feature for inspection of cracks using multi-frequency alternating current field measurement technique10.1016/j.ymssp.2022.109857 ↗
10. Shen, X., Lu, X., Guo, J., Liu, Y., Qi, J., and Lv, Z. (2024). Nondestructive Testing of Metal Cracks: Contemporary Methods and Emerging Challenges. Crystals, 14.10.3390/cryst14010054 ↗
11. Grenier, M., Demers-Carpentier, V., and Rochette, M. (2016, January 13–17). Pulsed eddy current: New developments for corrosion under insulation examinations. Proceedings of the 19th World Conference on Non-Destructive Testing, Berlin, Germany.
12. Pulsed eddy current detection of cracks in F/A-18 inner wing spar without wing skin removal using Modified Principal Component Analysis10.1016/j.ndteint.2013.01.004 ↗
13. Investigations of signal features of pulsed eddy current testing technique by experiments10.1784/insi.2012.55.9.487 ↗
14. Crack characterization in ferromagnetic steels by pulsed eddy current technique based on GA-BP neural network model10.1016/j.jmmm.2020.166412 ↗
15. Quantitative detection of combined cracks based on artificial neural network and eddy current testing signals10.3233/JAE-220221 ↗
16. Non destructive Eddy Currents inversion using Artificial Neural Networks and data augmentation10.1016/j.ndteint.2022.102635 ↗
17. Detection of Fatigue Microcrack Using Eddy Current Pulsed Thermography10.1155/2021/6647939 ↗
18. POD of NDT Techniques Using High Temperature Oxidized Fatigue Cracks in an Aero Engine Alloy10.1007/s10921-021-00769-7 ↗
19. Fatigue Crack Length Sizing Using a Novel Flexible Eddy Current Sensor Array10.3390/s151229911 ↗
20. Low-power eddy current detection with 1-1 type magnetoelectric sensor for pipeline cracks monitoring10.1016/j.sna.2020.112496 ↗
21. Diagnostics of stress corrosion and fatigue cracks using benchmark signals10.1016/j.matlet.2005.06.038 ↗
22. Caution when applying eddy current inversion to stress corrosion cracking10.1016/j.nucengdes.2005.06.016 ↗
23. On the numerical modeling of nucleation and growth of microstructurally short cracks in polycrystals under cyclic loading10.1557/jmr.2019.270 ↗
24. Kosasih, D.I., Lee, B.-G., and Lim, H. (2023). Multichannel One-Dimensional Data Augmentation with Generative Adversarial Network. Sensors, 23.10.3390/s23187693 ↗