Energy-Efficient Mixtures Suitable for 3D Technologies
Source abstract
Abstract
Compositions of fine-grained concrete mixtures that provide the minimum required strength values in 1 day (7.5 MPa) have been developed. A comparison was made of the test results of the properties of samples printed on a 3D printer with samples made according to the same recipes on a vibrating platform. A laboratory printer was designed and constructed to study the properties of extruded mixtures. The method was also proposed for measuring concrete mixes’ structural strength. Analysis of experimental data allowed the establishment of the features of the influence of the mineral additives and slag–alkaline binders for a comparison of basic physical and mechanical properties of concretes for 3D printing. It has been experimentally shown that possible undercompaction of the fine-grained mixtures formed on a 3D printer and decrease of properties are compensated by the introduction of hardening activator and superplasticizer additives. The novelty of this work lies in determining the comparative effect of various products of technogenic origin on the properties of mixtures for 3D printing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Civil Engineering and Architecture, National University of Water and Environmental Engineering, 33028 Rivne, Ukraine
Chair of Building Materials Engineering, Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Street, 31-155 Cracow, Poland
Chair of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II Street, 31-864 Cracow, Poland
Funding
Polish National Agency for Academic Exchange · Polish National Centre for Research and Development
References (39)
Show source-provided references
1. 3D Printing of Earth-Based Materials: Processing Aspects10.1016/j.conbuildmat.2018.04.017 ↗
2. A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering10.1108/RPJ-07-2021-0160 ↗
3. Wang, B., Zhai, M., Yao, X., Wu, Q., Yang, M., Wang, X., Huang, J., and Zhao, H. (2022). Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes. Buildings, 12.10.3390/buildings12030374 ↗
4. Dvorkin, L., Marchuk, V., Hager, I., and Maroszek, M. (2022). Design of Cement–Slag Concrete Composition for 3D Printing. Energies, 15.10.3390/en15134610 ↗
5. 3D Printed Concrete with Recycled Sand: Pore Structures and Triaxial Compression Properties10.1016/j.cemconcomp.2023.105048 ↗
6. Improving Printability of Limestone-Calcined Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture10.1016/j.cemconres.2020.106040 ↗
7. A Critical Review of 3D Concrete Printing as a Low CO2 Concrete Approach
8. Chen, Y., Veer, F., Copuroglu, O., and Schlangen, E. (2019). RILEM Bookseries, Springer.
9. Chen, Y., Li, Z., Figueiredo, S.C., Çopuroğlu, O., Veer, F., and Schlangen, E. (2019). Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development. Appl. Sci., 9.10.3390/app9091809 ↗
10. Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing10.1016/j.cemconcomp.2018.10.002 ↗
11. Low-Temperature Curing Strength Enhancement in Cement-Based Materials Containing Limestone Powder10.1617/s11527-017-1042-6 ↗
12. Sanytsky, M., Marushchak, U., Olevych, Y., and Novytskyi, Y. (2020). Lecture Notes in Civil Engineering, Springer.
13. Recent Advances in Understanding the Role of Supplementary Cementitious Materials in Concrete10.1016/j.cemconres.2015.03.018 ↗
14. Supplementary Cementitious Materials10.1016/j.cemconres.2010.12.001 ↗
15. Inline Quantification of Extrudability of Cementitious Materials for Digital Construction10.1016/j.cemconcomp.2018.09.015 ↗
16. An Approach to Develop Printable Strain Hardening Cementitious Composites10.1016/j.matdes.2019.107651 ↗
17. Mix Design and Fresh Properties for High-Performance Printing Concrete10.1617/s11527-012-9828-z ↗
18. Printable Properties of Cementitious Material Containing Copper Tailings for Extrusion Based 3D Printing10.1016/j.conbuildmat.2017.12.051 ↗
19. Improving the 3D Printability of High Volume Fly Ash Mixtures via the Use of Nano Attapulgite Clay10.1016/j.compositesb.2018.11.109 ↗
20. Dvorkin, L., Zhitkovsky, V., Sonebi, M., Marchuk, V., and Stepasiuk, Y. (2020). Improving Concrete and Mortar Using Modified Ash and Slag Cements, CRC Press.10.1201/9781003028338 ↗
21. Sanjayan, J., Nematollahi, B., Xia, M., Wang, L., and Guowei, M. (2019). 3D Concrete Printing with Low Carbon Cements, Butterworth-Heinemann.
22. Synergy between Fly Ash and Limestone Powder in Ternary Cements10.1016/j.cemconcomp.2010.09.006 ↗
23. The Effect of Using Granite Dust as a Component of Concrete Mixture
24. Analysis of the Possibility of Using Powder Basalt in Cement Mortar
25. Understanding the Filler Effect on the Nucleation and Growth of C-S-H10.1111/jace.13177 ↗
26. Geomaterials in Construction and Their Sustainability: Understanding Their Role in Modern Society10.1144/SP416.21 ↗
27. Why Alkaline Activation—60 Years of the Theory and Practice of Alkali-Activated Materials
28. On Sustainability and Digital Fabrication with Concrete10.1016/j.cemconres.2022.106837 ↗
29. Cementitious Materials for Construction-Scale 3D Printing: Laboratory Testing of Fresh Printing Mixture10.1016/j.conbuildmat.2017.04.015 ↗
30. Time Gap Effect on Bond Strength of 3D-Printed Concrete10.1080/17452759.2018.1500420 ↗
31. Direct Printing Test for Buildability of 3D-Printable Concrete Considering Economic Viability10.1016/j.autcon.2019.102986 ↗
32. Rushing, T.S., Stynoski, P.B., Barna, L.A., Al-Chaar, G.K., Burroughs, J.F., Shannon, J.D., Kreiger, M.A., and Case, M.P. (2019). 3D Concrete Printing Technology, Elsevier.
33. Large-Scale Digital Concrete Construction—CONPrint3D Concept for on-Site, Monolithic 3D-Printing10.1016/j.autcon.2019.102933 ↗
34. Large-Scale 3D Printing of Ultra-High Performance Concrete—A New Processing Route for Architects and Builders10.1016/j.matdes.2016.03.097 ↗
35. A 3D Concrete Printing Prefabrication Platform for Bespoke Columns10.1016/j.autcon.2020.103467 ↗
36. Eco-Friendly, Set-on-Demand Digital Concrete10.1089/3dp.2020.0350 ↗
37. Hager, I., Maroszek, M., Mróz, K., Kęsek, R., Hebda, M., Dvorkin, L., and Marchuk, V. (2022). Interlayer Bond Strength Testing in 3D-Printed Mineral Materials for Construction Applications. Materials, 15.10.3390/ma15124112 ↗
38. IEA, and UNEP (2022). 2022 Building Construction Global Status Report, UNEP.
39. Sanytsky, M., Sobol, H., and Markiv, M. (2010). Modified Cement Composites, NU “Lviv Polytechnic. (In Ukrainian).