Laboratory Tests and Numerical Simulation of the Thermal–Mechanical Response of a Fiber-Reinforced Phase Change Concrete Pile

The critical problem restricting the development and application of phase change energy piles is that adding phase change materials to concrete generally reduces its thermal conductivity. Therefore, exploring a scheme to improve the heat transfer performance of phase change energy piles is necessary. In this study, steel fibers were added to energy piles to enhance the heat exchange capacity between the pile and the surrounding soil. The model tests were conducted on two types of energy piles: a fiber-reinforced pile and a fiber-reinforced phase change pile. Based on laboratory tests, a three-dimensional thermo–hydro–mechanical coupled finite-element model was established to characterize the phase transformation process of FRPC piles accurately. Then, the thermal parameters of the phase change concrete pile were optimized and analyzed to explore the feasibility of improving the application of the phase change pile. The results reveal that the cooling condition where the initial ground temperature was higher than the phase change temperature was more suitable for the FRPC pile. When the flow rate was increased by 50%, the peak heat power of the FRPC pile increased by 25.7%. There is an optimal economic flow rate to balance the system’s energy consumption and heat power in different conditions. Increasing thermal conductivity and specific heat capacity are effective solutions to improve the heat transfer capacity of concrete piles. The energy pile that was enhanced with the high-thermal-conductivity PCM is a good choice to improve long-term operation performance.